Samsung Samtron 73v Quick Start Guide

 
Select Model Name    
 
 
 
Please make sure the following items are included with your monitor. 
If an
y items are missing, contact your dealer. 
 
 
 
 
 Unpacking 
 
 
 Monitor 
 
 
Monitor
 
 
 
 
 Manual 
 
 
Quick Setup Guide Warranty CardUsers Guide, Monitor Dirver 
CD 
 
 
  
 
 Cable
  
SAMTRON 93V
 

D-Sub Cable  Power Cord 
 
 
 
 Front 
 
 
 1. Menu button [ ] 
Use this button for open the on-screen menu and exits from the menu 
screen or closes screen adjustment menu. 
2. MagicBright™ 
button [ ] 
MagicBright™ is a new feature providing optimum viewing environment 
depending on the contents of the image you are watching. 
Currently four different modes are available: Custom, Text, Internet, and 
Entertain. 
Each mode has its own pre-configured brightness value. You can easily 
select one of four...

 
 
   the monitor saves your adjustments.
4. Brightness button [ ]
When OSD is not on the screen, Push the button to adjust brightness.
2,4. Adjust buttons [ ]
Adjust items in the menu.
5. Enter button [ ]/  
Auto button 
Activate a highlighted menu item. /  
Use this button for auto adjustment direct access.
See PowerSaver described in the manual for further information regarding power saving functions. 
For energy conservation, turn your monitor OFF when it is not needed, or when leaving it...

 
1.Connect the power cord for your monitor to the power port on the back of the monitor. 
Plug the power cord for the monitor into a nearby outlet.
2-1. Using the D-sub (Analog) connector on the video card.  
Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. 
 
2-2.Connected to a Macintosh. 
Connect the monitor to the Macintosh computer using the D-SUB connection cable.
2-3. In the case of an old model Macintosh, you need to connect the monitor using a special Mac...

   Monitor Assembly 
 1. Monitor and Bottom  
2. Monitor and Hanger   
 
   Attaching a base 
 
   This monitor accepts a 100 mm x 100 mm VESA-compliant mounting interface pad.
        A. 
Monitor 
        B. 
Mounting interface pad  
 
1 . Turn off your monitor and unplug its power cord.
2 . Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen. 
3 . Remove the four screws and then remove the Stand from the LCD monitor.
4 .
Align the Mounting Interface Pad with...

When prompted by the operating system for the monitor driver, insert the CD-ROM included 
with this monitor. Driver installation is slightly different from one operating system to 
another. Follow the directions as appropriate for the operating system you have. 
 
Prepare a blank disk and download the driver program file at the Internet web site shown here. 
 
zInternet web site :  http://www.samsung-monitor.com/ (Worldwide)
http://www.samsungusa.com/monitor (USA)
http://www.sec.co.kr/monitor (Korea)...

http://www.samsungmonitor.com.cn/ (China)
 
  Microsoft® Windows® XP Operating System 
 
1. Insert CD into the CD-ROM driver.  
2. Click 
Start —> 
Control Panel then click the 
Appearance and Themes Icon.  
 
     
 
3. Click 
Display icon and choose the 
Settings tab then click 
Advanced... 
 
     
 
4. Click the 
Properties button on the 
Monitor tab and select 
Driver tab.  
 
     
 
5. Click 
Update Driver.. and select 
Install from a list or.. then click 
Next button.  
 
 

     
 
6. Select 
Dont search ,I will.. then click 
Next and then click 
Have disk.  
 
     
 
7. Click the 
Browse button then choose A:(D:\Driver) and choose your monitor model in the model list 
and click the 
Next button.  
 
     
 
8. If you can see following 
Message window, then click the 
Continue Anyway button. Then click 

OK button. 
 
  
 
This monitor driver is under certifying MS logo,and this installation dont damage your system.The 
certified driver will be posted on Samsung Monitor...

 
 
     
 
10. Monitor driver installation is completed.  
 
 
 
   Microsoft® Windows® 2000 Operating System 
 
When you can see Digital Signature Not Found on your monitor, follow these steps.
1. Choose 
OK button on the 
Insert disk window.  
2. Click the 
Browse button on the 
File Needed window.  
3. Choose A:(D:\Driver) then click the Open button and then click 
OK button.  
How to install
1. Click 
Start , 
Setting , 
Control Panel.  
2. Double click the 
Display Icon.  
3. Choose the 
Settings...

 
 
    Linux Operating System 
 
        To execute X-Window, you need to make the X86Config file, which is a type of system setting file.  
  1. Press Enter at the first and the second screen after executing the X86Config file.  
2. The third screen is for  setting your mouse.  
3. Set a mouse for your computer.  
4. The next screen is for  selecting a keyboard.  
5. Set a Keyboard for your computer.  
6. The next screen is for  setting your monitor.  
7. First of all, set a  horizontal frequency  for...