Home > Samsung > Digital Camera > Samsung S760 Users Manual

Samsung S760 Users Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Samsung S760 Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							60_
    PLAY
    Setting up the play back function using the LCD monitor
    ÄMenus are subject to change without prior notice.
    Menu Tab Main Menu Sub Menu Secondary Menu Page
    ❹
    Ty p eAuto -
    p.68
    Plain -
    Photo -
    FastPhoto -
    QualityAuto -
    Draft -
    Normal -
    Fine -
    Date PrintAuto -
    Off -
    On -
    File NameAuto -
    Off -
    On -
    ResetNo -
    p.69Ye s -
    Starting the Multi Slide Show (❸
     )
    Images can be displayed continuously at pre-set intervals.
    You can view the Multi Slide Show by connecting the camera to an exter-
    nal monitor.
    1. Press the play mode button and press the menu button.
    2. Press the LEFT / RIGHT button and select the [MULTI SLIDE SHOW] 
    menu tab.
    Start the Multi Slide Show
    The Multi Slide Show can start only in the [Show] menu.
     1.  Use the Up / Down buttons to select the 
    [Show] menu and press the Right button. 
     2.  Select a desired sub menu by pressing the 
    Up / Down button. 
     [Play] :  The Multi Slide Show is closed 
    after one cycle. 
     [Repeat Play] :  The Multi Slide Show is 
    repeated until cancelled. 
     3.  Press the OK button and the slideshow will be started. 
     -  To pause the slide shown while playing it back, press the play & 
    pause(Ø
     ) button again.
     -  Pressing the play & pause( Ø
     ) button again will cause the Multi 
    Slide Show restart.
     -  To stop playback of the Multi Slide Show, press the play & pause 
    (Ø
     ) button, and then press the OK / Menu  button.
    
    MULTI SLIDE SHOW
    Interval
    ImageRepeat PlayPlayShow
    Effect
    Music
    Back SetOK
    Downloaded From camera-usermanual.com Samsung Manuals 
    						
    							04 PLAY
    61PLAY_
    Starting the Multi Slide Show (❸
     )
    You can select image to view
     1.  Use the Up / Down buttons to select the 
    [Image] menu and press the Right button.
     2.  Select a desired sub menu by pressing 
    the Up / Down button.
     [All]  :  All images saved in the Memory 
    are played back.
     [Date]  :  Images taken in a specified date 
    are played back.
     [Select] :  Play only the selected images. 
    If you press the Right button, you can select the desired 
    images to play back. 
    The selected image can be saved as [Select1], [Select2] 
    and [Select3]. If you save the selected image with the [New 
    Select] command, it will be saved as [Select1]. 
    But when a new image is saved again using [New Select], 
    the former image which had been saved as [Select1] will 
    be saved as [Select2] automatically.
    You can change and cancel the images which were saved 
    as [Select1], [Select2] and [Select3].
     3. Press the OK button and the settings are saved.
    Selecting Images
    Unique screen effects can be used for the Multi Slide Show.
     1.  Select the [Effect] sub menu by press-
    ing the UP / DOWN button and press the 
    RIGHT button.
     2.  Use the Up / Down button to select the 
    type of effect.
     [Off]  : No effect.
     [Basic]  :  Fade In/Out effect is added 
    and the Images are displayed at set interval.
     [Classic]  :  You can add noise to the image to give a classic feel.
     [Memories] : Scratches are added to give an old movie effect.
     [Rhythmic]  : Images are displayed with a special effect.
     [Delight]  : Images are displayed with a special effect.
     3. Press the OK button to confirm the setting.
    Configure Multi Slide Show effects
    
    MULTI SLIDE SHOW
    Interval
    ShowBasicOff
    EffectImage
    Music
    Back SetOK
    MemoriesClassic
    RhythmicDelight
    MULTI SLIDE SHOW
    Interval
    ShowAllImageEffect
    Music
    Back SetOK
    SelectDate
    
    Downloaded From camera-usermanual.com Samsung Manuals 
    						
    							62_
    PLAY
    Set the Multi Slide Show music.
     1.  Select the [Music] sub menu by pressing the 
    UP / DOWN button and press the RIGHT 
    button.
     2.  Use the Up / Down buttons to select the 
    desired Music.
     3. Press the OK button to save the configuration.
    Starting the Multi Slide Show (❸
     )
    Setting Background Music Setting play interval 
    The loading time depends on the image size and quality.While the Multi Slide Show is playing, only the first frame of a MOVIE 
    file is displayed.
    While the Multi Slide Show is playing, the voice recording file will not 
    display. 
    The interval menu functions in the [Off], [Basic] and [Classic] menu only.
    Set the Multi Slide Show play interval.
     1.  Select the [Interval] sub menu by pressing 
    the UP / DOWN button and press the RIGHT 
    button.
     2.  Use the Up / Down buttons to select the 
    desired interval.
     3. Press the OK button to save the configuration.
    
    MULTI SLIDE SHOW
    Effect
    Show
    Off
    Music
    Image
    Interval
    Back SetOK
    PanoramaFirst SmileRemembrance
    Playback(
    ø )
    You can add your voice to a stored still image. 
    Voice memo
     -  Press the shutter button to take a picture. The images are saved 
    on the memory. After saving the image, the voice will record for 10 
    seconds.
     -  To stop the recording, press the shutter button.
    [Ready for recording] [Voice is recording] [Voice memo menu]
    SHStop
    
    PLAYBACK
    Protect
    Copy to Card
    OffVoice MemoDelete
    DPOF
    Back SetOK
    On
    
    MULTI SLIDE SHOW
    Effect
    Show
    1 secIntervalImage
    Music
    Back SetOK
    3 sec5 sec10 sec
    Downloaded From camera-usermanual.com Samsung Manuals 
    						
    							04 PLAY
    63PLAY_
    Deleting images
    
    Of all the files stored in the memory card, the unprotected files in the DCIM subfolder 
    will be deleted. Remember that this will permanently delete unprotected images. 
    Important shots should be stored on a computer before deletion takes place. The 
    startup image is stored in the cameras internal memory (i.e., not on the memory 
    card) and it will not be deleted even if you delete all files on the memory card.
     1.  Press the Up / Down button and select 
    the [Delete] menu tab. And then press the 
    Right button.
     2.  Select a desired sub menu by pressing 
    the UP / DOWN button and press the OK 
    button.
     [Select] :  Selection window for an image to 
    delete is displayed.
     - Up/ Down/ Left/ Right : Select an image
     - Zoom T Button :  Select the image for dele-
    tion. ( Ë
      mark)
     - OK Button :  Press the OK button to display 
    the confirmation message. 
    Select the [Yes] menu and 
    press the OK button to delete 
    marked images.
     [All] :  Displays confirmation window. Select 
    the [Yes] menu and press the OK but-
    ton to delete all unprotected images. If 
    there aren’t protected images, all the 
    images are deleted and a [No Image!] message will appear.
     3.  After deletion, the screen will be changed to the play mode screen.
     ConfirmOK
    Delete All?NoYes
    This deletes images stored on the memory.
    
    PLAYBACK
    Protect
    Copy to Card
    DeleteVoice Memo
    DPOF
    Back SetOK
    SelectAll
    Protecting images
    This is used to protect specific shots from being accidentally erased 
    (Lock). It also unprotects images that have been previously protected 
    (Unlock).
     1.  Press the Up / Down button and select the 
    [Protect] menu tab. And then press the 
    Right button.
     2.  Select a desired sub menu by pressing 
    the UP / DOWN button and press the OK 
    button.
     [Select ] :  Selection window for an image 
    to be protected / released is 
    displayed.
     - Up / Down / Left / Right :  Select an image
     - Zoom W / T Button :  Protect / release the 
    image
     - OK button :  Your changes will be saved 
    and the menu will disappear.
     [All] : Protect / release all saved images
     -  If you protect an image, the protect icon 
    will be displayed on the LCD monitor. (An 
    unprotected image has no indicator)
     -  An image in LOCK mode will be pro-
    tected from the delete function or [Delete] 
    functions, but will NOT be protected from 
    the [Format] function.
                    ConfirmOK
    Protect All?UnlockLock
    
    PLAYBACK
    Delete
    Copy to Card
    ProtectVoice Memo
    DPOF
    Back SetOK
    SelectAll
    Playback(
    ø )
    Select DeleteTOK
    Unlock SetT/WOK
    Downloaded From camera-usermanual.com Samsung Manuals 
    						
    							64_
    PLAY
    
    DPOF(Digital Print Order Format) allows you to embed printing infor-
    mation on your memory card’s MISC folder. Select the pictures to be 
    printed and how many prints to make.
    
    The DPOF indicator will display on the LCD monitor when an image 
    that has DPOF information plays back. Images can then be printed 
    on DPOF printers, or at an increasing number of photo labs.
    
    This function is not available for Movie clips and Voice recording files.
    
    When the wide angle image is printed as a wide angle print, 8% of the 
    left and right side of the image may not be printed. Check that your 
    printer can support the wide angle image when you print the image. 
    When you print the image at a photo lab, request that the image is 
    printed as a wide angle image. (Some photo labs may not support the 
    wide angle size print.) 
    DPOF
    Playback(
    ø )
    
     Standard 
    This function allows you to embed printing quantity information on a 
    stored image.
     1.  Press the Up / Down button and select the 
    [DPOF] menu tab. And then press the Right 
    button.
     2.  Press the Right button again and [Standard] 
    sub menu will display. 
     3.  Select a desired sub menu by pressing the 
    Up / Down button and press the OK button.
     [Select] :  Selection window for an image to 
    print is displayed.
     - 
    Up / Down / Left / Right : Select an image to 
    print.
     -  Zoom W / T Button :  Select the number of 
    prints.
     [All Pics] :  Configure number of prints for 
    all pictures except movie and 
    voice files.
     - W / T button : Select a number of prints
     [Cancel] : Cancel the print setup.
     4.  Press the OK button to confirm the setting.
    If an image carries DPOF instructions, the 
    DPOF indicator ( Ñ
     ) will show.
    W        00 ImagesTSetOK
    W00 ImagesTSetOK
    
    PLAYBACK
    Size
    SelectStandardIndex
    Back SetOK
    CancelAll Pics
    
    Downloaded From camera-usermanual.com Samsung Manuals 
    						
    							04 PLAY
    65PLAY_
    
     Index
      Images (except for movie clips and voice file) are printed as index 
    type.
     1.  Press the Up / Down button and select the 
    [DPOF] menu tab. And then press the Right 
    button.
     2.  Press the Right button again and [Index] 
    sub menu will display. 
     3.  Select a desired sub menu by pressing the 
    UP / DOWN button.
     If [No] is selected   :  Cancel the index print setting.
     If [Yes] is selected  : The image will be printed in index format.
     4. Press the OK button to confirm the setting.
    Playback(
    ø )
    
    Print size
    You can specify the print size when printing images stored on the 
    memory card. The [Size] menu is available only for DPOF 1.1 compat-
    ible printers.
     1. Press the Up / Down button and select the 
    [DPOF] menu tab. And then press the Right 
    button.
     2. Press the Right button again and select the 
    [Size]. Sub menu will display. 
     3. Select a desired sub menu by pressing the 
    UP / DOWN button and press the OK button.
     [Select] : Selection window to change the 
    printed size of the image is 
    displayed.
     - Up / Down / Left / Right : Select an image.
     - Zoom W / T Button : Change the print size.
     - OK button :  Your changes will be saved 
    and the menu will disappear.
     [All Pics] : Change print size of all saved 
    images.
     - W / T button : Select a print size 
    - OK button : Confirm the changed setting.
     [Cancel] : Cancel all of the print size settings.
    Ä
    DPOF [Size] secondary menu : Cancel, 3X5, 4X6, 5X7, 8X10
    
    Depending on the manufacturer and print model, cancelling the print-
    ing may take a little longer for the printer to process.
    
    PLAYBACK
    SizeNoIndexStandard
    Back SetOK
    Yes
    
    
    WCancelT         SetOK
             SetOKWCancelT
    
    PLAYBACK
    IndexSelect
    Size
    Standard
    Back SetOK
    CancelAll Pics 
    Downloaded From camera-usermanual.com Samsung Manuals 
    						
    							66_
    PLAY
    This enables you to copy image files, movie clips and voice 
    recording files to the memory card.
    Copy To Card
     1.  Select the [Copy To Card] menu tab by 
    pressing the Up / Down button. And then 
    press the Right button.
     2.  Select a desired sub menu by pressing the 
    UP/ DOWN button and press the OK button.
     - [No]   : Cancels Copy to Card.
     - [Yes] :  All images, movie clips and voice 
    recording files saved in the internal 
    memory are copied to the memory card after the [Process-
    ing!] message is displayed. After copying has been com-
    pleted, the screen will return to play mode.
    Playback(
    ø )
    PLAYBACK
    DeleteProtect
    NoCopy to Card
    Voice Memo
    DPOF
    Back SetOKYes
    When this menu is selected without inserting a memory card, the [No 
    Card] message will be displayed.
    If there is not enough space available in the memory card to copy 
    saved images in the internal memory (About 11 MB), the [Copy 
    To Card] command will copy only some of the images and display 
    [Memory Full!] message. Then the system will return to the playback 
    mode. Please be sure to delete any unnecessary files to free up 
    space before inserting the memory card into the camera.
    When you move the images that are stored in the internal memory 
    by doing [Copy To Card] to the card, the next number of file names 
    will be created in the card to avoid duplication of the file name. 
     -  When the [Reset] of the [File] setup menu is set : The copied file 
    names start from after the last stored file name. 
     -  When the [Series] of the [File] setup menu is set : The copied file 
    names start from after the last captured file name. After complet-
    ing [Copy To Card], the last stored image of the last copied folder 
    is displayed on the LCD monitor. 
    Downloaded From camera-usermanual.com Samsung Manuals 
    						
    							04 PLAY
    67PLAY_
    PictBridge
    You can use the USB cable to connect this camera to a printer that 
    supports PictBridge (sold separately) and print the stored images 
    directly. Movie clips and voice files cannot be printed.
    
     Connecting the Camera to a Printer 
    Setting up the camera for connection to the 
    printer
     1.  Connect the camera and printer with USB 
    cable.
     2.  Select the [Printer] menu by pressing Up / 
    Down button and press the OK button. 
    Select USBComputerPrinter
    ConfirmOK
    Ä
    If the [USB] menu is set to the [Computer], you cannot connect a 
    Pictbridge compatible printer to the camera through USB cable with 
    [Connecting Computer] message. In this case, remove the cable and 
    do the step 1 and 2 again.
    
     Easy printing
    When you connect the camera to printer in 
    the Play back mode, you can print a picture 
    easily. 
     - Pressing the printer ( »
     ) button : 
    Currently displayed image will be printed 
    with the printer’s default setting. 
     -  Pressing the Left / Right button : 
    Selects a previous / next image.
    Print MenuOK
    Downloaded From camera-usermanual.com Samsung Manuals 
    						
    							68_
    PLAY
    PictBridge : Picture Selection
    You can select images you want to print.
    
     Setting the Number of Copies to Print
     1.  Press the Menu button and the PictBridge 
    menu will display.
     2.  Use the Up / Down buttons to select the 
    [Images] menu and press the Right button.
     3.  Use the Up / Down buttons to select a de-
    sired sub menu and press the OK button.
     -  Select [One Pic] or [All Pics]. A screen 
    where you can set the number of copies 
    to print will appear as shown below.
      - Press the Up / Down button to select the number of prints.
     -  When [One Pic] is selected : Use the Left / Right button to select 
    another picture. After selecting 
    another picture, select the number of 
    prints for another picture.
     -  After setting the number of prints, press the OK button to save.
     -  Press the Shutter button to return to the menu without setting the 
    number of prints.
      4. Press the Print button ( »
     ) and images will be printed. 
    [When [One Pic] is selected][When [All Pics] is selected]
    Exit SetSHOKPrev
    Next
    00
    Exit SetSHOK
    00
    
    PICTBRIDGE
    SizeLayout
    One PicImages
    Date
    Type
    Back SetOK
    All Pic
    Quality
    PictBridge : Print Setting
    You can select the Paper Size, Print Format, Paper Type, Print Quality, 
    Date Print, and File Name Print menus for printed pictures.
    Ä
    Some menu options are not supported on all printers. 
    If not supported, the menus are still displayed in the LCD, but are not 
    selectable.
     1.  Press the Menu button and the PictBridge 
    menu will display.
     2.  Use the Up / Down buttons to select the de-
    sired menu, and then press the Right button.
     3.  Use the Up / Down buttons to select the 
    desired sub menu value, and then press the 
    OK button.
    Menu Function Sub menu
    Size Set the size of the printing paper
    Auto, PostCard, Card,  4X6, L, 
    2L, Letter, A4, A3
    LayoutSet the number of pictures to be 
    printed on a sheet of paperAuto, Full, 1, 2, 4, 8, 9, 
    16, Index
    Ty p eSet the quality of the printing 
    paperAuto, Plain, Photo, 
    FastPhoto
    QualitySet the quality of the picture to be 
    printedAuto, Draft, Normal, Fine
    Date Set whether to print the date Auto, Off, On
    File Name
    Set whether to print the file nameAuto, Off, On
    PICTBRIDGEImages
    Layout
    AutoSize
    Date
    Type
    Back SetOK
    PostCard
    Quality
    Card4 x 6L2L
    Downloaded From camera-usermanual.com Samsung Manuals 
    						
    							04 PLAY
    69PLAY_
    PictBridge : Reset
    Initialises user-changed configurations.
     1.  Use the Up / Down buttons to select the 
    [Reset] menu tab. And then press the Right 
    button.
     2.  Use the Up / Down buttons to select the 
    desired sub menu value, and then press the 
    OK button.
     If [No] is selected  :  Settings will not be 
    reset.
     If [Yes] is selected :  All print and image settings will be reset.
    Ä
    Default print setting varies depending on the printer manufacturer. 
    For your printer’s default setting, refer to the user’s guide that came 
    with your printer.
    PICTBRIDGELayout
    Quality
    NoReset
    Type
    Date
    Back SetOK
    File NameYes
    Important notes
    Be sure to observe the following precautions!
    
    This unit contains precision electronic components. Do not use or 
    store this unit in the following locations.
     -  Areas exposed to severe changes in temperature and humidity.
      - Areas exposed to dust and dirt.
     -  Areas exposed to direct sunlight or the inside of a vehicle in hot 
    weather.
      - Environments where there is high magnetism or excessive vibration.  - Areas with high explosives or highly flammable materials.
    
    Do not leave this camera in places subject to dust, chemicals (like 
    naphthalene and mothballs), high temperature and high humidity.
    Keep this camera with silica gel in a hermetically sealed box when not 
    planning to use the camera for a long period of time
    
     Sand can be particularly troublesome to cameras.
     -  Do not let sand get inside the camera when using it on beaches, 
    coastal dunes, or other areas where there is lots of sand.
     -  Doing so may result in failure or may permanently render the cam-
    era unusable.
    
     Handling the camera
      -  Never drop the camera or subject it to severe shocks or vibrations.
     -  Protect  the large size LCD monitor from an impact. When this 
    camera is not used, keep it in the camera case.
     -  Avoid obstructing the lens or the flash when you capture an image.
     -  This camera is not waterproof.
    To avoid dangerous electrical shocks, never hold or operate the 
    camera with wet hands.
    Downloaded From camera-usermanual.com Samsung Manuals 
    						
    All Samsung manuals Comments (0)

    Related Manuals for Samsung S760 Users Manual