Samsung S760 Users Manual

30_RECORDING

 Selecting the self-timer
 1.  Rotate the Mode dial to select a desired 
RECORDING mode.
 2.  
Press the SELF-TIMER / RIGHT ( ✢ ) button 
until the desired mode indicator displays on the 
LCD monitor. A 10 second, 2 second, Double 
self-timer or Motion timer icon appears on the 
LCD monitor.
 3.  When you press the SHUTTER button, the 
picture will be taken after the specifi ed time 
has elapsed.
Self-timer(✢
 )
 / Right button
[Selecting the 10 SEC 
self-timer]

 Self-timer mode...

02 RECORDING
31RECORDING_

The Motion Timer fl ows are as followings. (Movie Clip mode excluded)
Selecting the Motion Timer $
 Pressing the Shutter button $
Confi rming the composition (Within 6 sec.)
*1$
 Starting the detection 
(Swing your hands fully)*2$
 Stopping the detection (Do not move) 
$
 Taking an image (after 2 sec.)
*1: The camera detects the subjects movement 6 seconds after pressing the Shtter 
button, so confi rm the composition within 6 seconds.
*2: Move your body or hands fully.
In the...

32_RECORDING
E (Effect) button
1. Select a desired sub menu by pressing the Up/Down button and 
press the OK button.
By using the camera’s digital processor, it is possible to add special ef-
fects to your images

Press the E button in an available recording 
mode.
 Custom colour :  You can change the R (Red), 
G (Green) and B (Blue) 
values of the image.
  - Up/Down button : Selects R, G, B
  - Left/Right button : Changes the values   2. Press the shutter button to capture an image.
Icon Description...

02 RECORDING
33RECORDING_
Fn button
You can use the Fn button to set the following menus.
 3.  Select a desired menu by pressing the Left / Right button and then 
press the OK button. 
Up / Down 
buttonSIZE
3264X2448QUALITY
Fine
Left / Right 
buttonSIZE
3264X2448SIZE
3264X2176
 1. Press the Fn button in an available mode.
 2.  Select a desired menu by pressing the Up / Down button. And then 
a sub menu will be displayed at the bottom right of the LCD monitor. 
How to use the Fn menu
(o : Selectable)...

34_RECORDING
The higher the resolution, the lower the number of shots 
available because high resolution images require more memory.
Thisfi le format complies with the DCF (Design rule for Camera File 
system).
JPEG (Joint Photographic Experts Group) : 
JPEG is the image compression standard developed by the Joint 
Photographic Experts Group. This type of compression is most 
commonly used for compressing photos and graphics because it can 
compress the fi les effi ciently.
SizeQuality / Frame rate
You...

02 RECORDING
35RECORDING_
Metering Sharpness
If you cannot obtain suitable exposure conditions, you can change the 
metering method to take brighter pictures.
[Multi] :   Exposure will be calculated based on 
an average of the available light in the 
image area. However, the calculation 
will be biased towards the centre of the 
image area. This is suitable for general 
use.
[Spot] :   Only the rectangular area in the centre 
of the LCD monitor will be metered for light. This is suitable 
when the...

36_RECORDING
White balance 
The white balance control allows you to adjust 
the colours to appear more natural.
ISO
 [Auto] :  The cameras sensitivity is automati-
cally changed by variables such as 
lighting value or subject brightness.
[ISO 80, 100, 200, 400, 800, 1000 ] :
You can increase the shutter speed while the 
same amount of light is present, by increasing 
the ISO sensitivity. However, the image may 
be saturated in high luminance. 
The higher the ISO value, the higher the camera’s sensitivity...

02 RECORDING
37RECORDING_

Using the Custom White Balance
White balance settings may vary slightly depending on the shooting 
environment. You can select the most appropriate white balance set-
ting for a given shooting environment by setting up the custom white 
balance.
 1.  Select the CUSTOM ( Å
 ) menu of 
the White Balance and place a sheet 
of white paper in front of the camera so 
that the LCD monitor shows only white.
 2.  MENU/OK button :  selects previous 
custom white balance.
 Shutter button...

38_SETUP
Using the LCD monitor to adjust the camera settingsRecording ( Ò
 )
You can use the menu on the LCD monitor to set up recording functions.

 The items indicated by  are default settings.
Mode Menu Sub menu Available mode Page
Ò
( Recording )
Foucs AreaCenter AF Multi AFp.38
Voice Memo Off Onp.39
Voice Record- p.39
Voice Mute Off Onp.40
Scene
Nightscene Children Landscape
p.40Close up Text Sunset
Dawn Backlight Firework
Beach&Snow--
Ä
Menus are subject to change without prior notice.
Auto Focus...

03 SETUP
39SETUP_
Voice Memo
You can add your voice-over to a stored still 
image. (Max. 10 sec.)
- If the voice memo indicator is displayed on 
the LCD monitor, the setting is completed.
 -  Press the shutter button and take a picture. 
The picture is stored on the memory card.
StopSH
 -  Voice memo will be recorded for ten 
seconds from the moment the picture is 
stored. In the middle of the sound record-
ing, pressing the shutter button will stop the 
voice memo.
Voice Recording
A voice can be...