Samsung R225 User Guide

							77
S Se
et
tt
ti
in
ng
gs
s
Own Number
Note: The contents of this menu may vary,
depending on the SIM card. 
You can enter your own name and number using this
menu. If you have subscribed to the Alternate Line
Service, you can select a line with  or  .
The following options are available:
Edit:allows you to edit name and number.
Erase:allows you to erase name and number.
Language
Your phone supports different languages in addition
to English. The text features are changed when the
language setting is changed.
You can also set the default text input mode. For
details on the text input modes available, refer to
page 35. 
						

							79
S Se
et
tt
ti
in
ng
gs
s
78
S
Se
et
tt
ti
in
ng
gs
s
Service Light
This option allows you to select whether or not the
service light on the top of the phone is used. The
following options are available.
ON:the service light flashes when the phone is
ready for use.
OFF:the service light is not used.
Auto Redial
With the Auto Redial function, the phone makes up
to ten attempts to redial a phone number after an
unsuccessful call.
Note: The interval between two call attempts varies.
The following options are available.
ON:the number is redialed automatically.
OFF:the number is not redialed.
Car Kit Answer
With the Auto Answer function, the phone auto-
matically answers calls after 3, 5 or 10 seconds. You
can also turn this feature off.
Note: This feature is only available when the phone
is connected to a car kit (optional).
Any-key Answer
Depending on the setting of the Any-key Answer
option, you can answer an incoming call by pressing
any key, except  and the Rejectsoft key.
To reject the call, press  or the Rejectsoft key.
The following options are available.
ON:you can press any key, except  and Reject to
answer a call.
OFF:you can only press       or the Acceptsoft key
to answer a call.
Backlight
You can select whether or not the phone uses the
backlight. A marginal increase in standby/talk time
can be achieved by turning the backlight off. The
following options are available.
Short:the backlight comes on when you press a key
or receive a call and switches off 10 seconds after
the last key is pressed.
Long:the backlight comes on when you press a key
or receive a call and switches off 20 seconds after
the last key is pressed.
OFF:the backlight is not used. 
						

							81
S Se
et
tt
ti
in
ng
gs
s
80
S
Se
et
tt
ti
in
ng
gs
s
Reset Settings
You can easily reset your phone to its default
configuration. To do so, proceed, as follows.
1.  Select the Reset Settingsmenu option.
2.  Enter the 4-digit phone password.
Note: The password is preset to 0000. To change this
password, refer to page 88.
Network ServicesMenu 4-2
These menu functions are network services.
Please contact your service provider to check their
availability and subscribe to them, if you so wish.
Caller ID
You can prevent your phone number from being
displayed on the phone of the person being called.
Note: Some networks do not allow the user to
change this setting.
The following options are available.
Default: the default setting provided by the network
is used.
Hide Number:your number is not displayed on the
other person’s phone.
Send Number:your number is sent each time you
make a call.
Key Lock
With the key lock function, you can prevent accidental
key pressing.
15 seconds/ 30 seconds/ 1 minute/ 2 minutes:
When set, the lock icon(     )is visible in the display
and your key input doesn’t work in idle mode. To
activate the key pad, press the left soft key and
press the        key. The keypad is automatically
locked if no key is pressed within the set time.
OFF:the keypad will not lock automatically.
Note: You can make the keypad lock manually by 
pressing and holding the         key in 
idle mode regardless of this key lock setting.   
						

							83
S Se
et
tt
ti
in
ng
gs
s
82
S
Se
et
tt
ti
in
ng
gs
s
To set your call forwarding options, proceed as
follows.
1.  Select the type of call forwarding required by
pressing  or  until the appropriate option
is highlighted, and then press the Select soft key.
2.  Select the type of calls to be forwarded by pressing
or  until the appropriate option is
highlighted and then press the Select soft key.
3.  
Press the Activatesoft key to confirm your settings.
4.  Enter the number to which the calls are to be
forwarded.
To enter the international code, press and hold 0
until the + sign is displayed. You can also select a
number in the phonebook or the voice server
number, by pressing the Optionssoft key, followed
by PhoneBookor Voice Server Number.
5.  When you are satisfied, press  or theOKsoft
key. 
The phone sends your setting to the network and
the network’s acknowledgement is displayed.
To deactivate specific call forwarding settings,
proceed as follows.
1.  Select the call forwarding option to be deactivated.
2.  Select the type of call to which this option applies.
3.  Press the Removesoft key.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
You can also deactivate all
call forwarding settings by
selecting the Cancel Alloption.
Call Forwarding
Note: Some call forwarding options may not be shown
if they are not supported by your network
operator.
This network service enables incoming calls to be
rerouted to the number that you specify.
Example
:  You may wish to forward your business calls
to a colleague while you are on holiday.
Call forwarding can be set up in the following ways.
Forward Always:all calls are forwarded.
Unavailable:calls are forwarded if you are busy, do
not answer or cannot be reached.
Cancel All:all call forwarding options are cancelled.
Note: These options may be different, depending on the
SIM card.
You can specify individual forwarding options for each
of the following call types:
•  Voice calls only
•  Fax calls only (not available when line 2 is in use)
•  Data calls only (not available when line 2 is in use)
Example
:  You can:
• Systematically forward fax calls to your
office fax machine 
• Forward voice calls to your colleague if   
you are already using the phone 
						

							85
S Se
et
tt
ti
in
ng
gs
s
Network Selection
The Network Selection feature enables you to:
•  Indicate whether the network used when roaming
(outside your home area) is selected automatically
or manually
•  Set up a preferred list to be used when selecting
a network automatically
Note: You can select a network other than your
home network if it has a valid roaming
agreement with your home network.
To indicate whether the network is to be selected
automatically or manually when roaming, proceed as
follows.
1.  When Network Selectis displayed, press the
Selectsoft key.
2.  Press  or  until the appropriate option is
highlighted and press the OK soft key.
If you select Automatic, you are connected to the
first available network in the preferred list when
roaming.
If you select Manual, the phone scans for the
available networks. Go to Step 3.
3.  Press  or  until the preferred network is
highlighted and press the OK soft key.
You are connected to that network when roaming.
Call Waiting
This network service enables you to be informed when
someone is trying to reach you during another call.
To set your call waiting options, proceed as follows.
1.  Select the type of calls to which the call waiting
option is to be applied by pressing  or 
until the appropriate option is highlighted and
then press Select.
2.  Press the Activatesoft key to confirm your
settings.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
To deactivate specific call waiting settings, proceed
as follows.
1.  Select the type of call to which the option applies.
2.  Press the Deactivatesoft key.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
You can also deactivate all
call waiting settings by
selecting the Cancel Alloption.
S Se
et
tt
ti
in
ng
gs
s
84 
						

							87
S Se
et
tt
ti
in
ng
gs
s
86
S
Se
et
tt
ti
in
ng
gs
s
The following options are available.
Enable:you must enter the PIN each time the phone
is switched on.
Disable:the phone connects directly to the network
when you switch it on.
Change PIN
This feature allows you to change your current PIN
to a new one, provided that the PIN Check feature is
enabled. You must enter the current PIN before you
can specify a new one.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
Phone Lock
When the Phone Lock feature is enabled, the phone
is locked and you must enter the phone password
each time the phone is switched on.
The password is factory set to 0000. To change the
phone password, refer to the Change Password
menu option (4-3-4).
Once the correct password has been entered, you
can use the phone until you switch it off.
The following options are available.
Enable:you are required to enter the phone
password when you switch the phone on.
Disable:you are not asked to enter the phone
password when you switch the phone on.
Line Identification
This option allows you to view the following line
identification settings.
CLIP(Calling Line Identification Presentation) / 
COLP(Connected Line Identification Presentation) 
If these network functions are active, the caller’s
number is displayed during a call. If the phone
number matches one stored in the phonebook, the
caller’s name is also displayed.
CLIR(Calling Line Identification Restriction) /
COLR(Connected Line Identification Restriction) 
If these network functions are active, your phone
number is not displayed on the called person’s phone.
Security SettingsMenu 4-3
The Security feature enables you to restrict the use
of your phone to:
•  The people of your choice
•  The types of calls of your choice
Various codes and passwords are used to protect the
features of your phone. They are described in the
following sections (also see page 103).
PIN Check
When the PIN Check feature is enabled, you must
enter your PIN each time you switch the phone on.
Consequently, any person who does not have your
PIN cannot use your phone without your approval.
Note: Before disabling the PIN Check feature, you
must enter your PIN. 
						

							89
S Se
et
tt
ti
in
ng
gs
s
88
S
Se
et
tt
ti
in
ng
gs
s
Change PIN2
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the current
PIN2 before you can specify a new one. 
Once you have entered a new PIN2, you are asked to
confirm it by entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
LCD SettingsMenu 4-4
The LCD Settingsmenu enables you to set the style of
the LCD display.
Screen Mode
You can select the screen image to be displayed in idle
mode.
Normal Mode:the LCD displays 
and the current time and date.
Image Display:The LCD displays the image selected
via the Select Imageoption 10 seconds after the last
key is pressed. When the LCD displays the image, press
any key to access the normal mode.
If the Key Lock is On, press the left soft key and then
the        key to access the normal mode.
Clock:The LCD displays an analogue clock. 10 seconds
after the last key is pressed.
When the LCD displays the clock, press any key to
access the normal mode. If the Key Lock is On, press
the left soft key and then the       key to access the
normal mode. 
Change Password
The Change Password feature allows you to change your
current phone password to a new one. You must enter
the current password before you can specify a new one.
The password is factory set to 0000. Once you have
entered a new password of up to 4 digits, you are asked
to confirm it by entering it again.
SIM Lock
When the SIM Lock feature is enabled, your phone only
works with the current SIM. 
Once you have entered the lock code, you are asked to
confirm it by entering it again.
To unlock the SIM, you must enter the SIM lock code.
FDN Mode
The FDN (Fixed Dial Number) mode, if supported by your
SIM card, allows you to restrict your outgoing calls to a
limited set of phone numbers.
The following options are available.
Enable:you can only call phone numbers stored in the
phonebook. You must enter your PIN2.
Disable:you can call any number.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed. 
						

							90
S Se
et
tt
ti
in
ng
gs
s
Select Image
This option allows you to select the image to be displayed
when you set the Screen Modeoption to Image
Display. You can select one of five images 
(Flowers, House, Kangaroo, Panda and Tiger).
LCD Contrast
This option allows you to adjust the contrast of the LCD
screen. Press  to increase or  to decrease the
contrast.
Service Light ColorMenu 4-5
There are five colors available for the service light: normal
(green), orange, red, violet and blue.
You can scroll through these colors, by pressing the
or key. Press the Select soft key to select the
required color. 
						

							91
Organizer
The Organizer feature enables you to:
•  Write your schedule
•  Calculate 
•  Set the current date and time
•  Set the alarm so that the phone rings at a specific
time (to remind you of an appointment for
example)
•  Find out what time it is in various cities around
the world
SchedulerMenu 5-1
The Scheduler helps you to keep track of reminders,
calls that you need to make, meetings and birthdays.
The phone alarm rings when the date set for a
birthday, reminder or call is reached.
When you access the Schedulermenu, the
following options are available.
Go to date:allows you to enter a particular date and
schedule an event on that date.
View All:shows the events scheduled. 
Delete All:deletes all scheduled events. 
						

							93
O Or
rg
ga
an
ni
iz
ze
er
r
92
O
Or
rg
ga
an
ni
iz
ze
er
r
A date that has a schedule already associated is
displayed in bold.
If you select such a date, you will see the contents.
Note: If you have scheduled more than one event on
a given day, you can scroll to the required
event by pressing  or  .
The following options are available.
Add:allows you to add new contents.
Delete:deletes the scheduled event.
Move:moves the scheduled event to a new date.
Copy:copies the scheduled event to a new date.
Delete Day:deletes all events scheduled on that
date.
AlarmMenu 5-2
This option allows you to set the alarm to ring at a
specific time. You can set one or more alarms.
The following alarms are available. 
Daily Alarm:the alarm rings every day at the same
time.
Once Alarm:the alarm rings only once and is then
deactivated.
Weekly Alarm:the alarm rings every week on the
same day and at the same time.
The Alarm Toneoption allows you to select a
specific tone for the alarm.
To schedule a new event, proceed as follows.
1.  When the calendar is displayed, use the 
and  keys to select the month, the  and
keys to select the week and the  and
keys to select the day. You can also use the
Go to datemenu option to specify the date. 
Note: To exit the Calendar screen, press  .
The phone returns to the previous menu
level.
2.  Press the O K soft key. 
3.  Select a schedule type. Four types are available.
Reminder:requires a description and the time.
Call:requires a phone number and the time.
Meeting:requires a description and the time.
B i rthday:requires a name and the time.
4.  Enter the appropriate information, referring to
page 35 for further details on how to enter text if
necessary.
5.  If you wish to set the alarm to ring on the
scheduled date and time, select Ye s. Otherwise,
select No.
6.  If you selected Ye s, set the time for the alarm
and press OK.