Samsung Q40 Service Guide

							SENS Q40 < 4 - 1 >
4.Assembly and Disassembly
1) Q40Assembly and Disassembly
이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다.
This Document can not beused without Samsung's authorization.
Part Picture Description
Main
System
1. Separate the AC adapter and the
battery certainly before disjoint system.
2. Push out the battery on like figure 2
after have pushed latches with figure 1
to both side
3. Remove the Bottom Screws.
4. To remove the Keyboard, lift the
hook up.
5. Pull out the FPC after lift the
Connector Lock. 
						

							SENS Q40 < 4 - 2 >
4. Disassembly and Assembly
Part Picture Description
Main
System
6. Remove the Thermal Plate의 Screw
(4ea).
7. Remove the Hinge Cap by using
the tweezers.
8.Remove the screws(2EA) and LCD
cable screw(1EA) at yellow circle that
combine Hinge and Top.
9.Pull out the LCD cable and detach
the LCD Assy
(Caution : When separate the Antenna cable
first separate antenna from Bottem by using
tweezers then separate each antenna by using
hand cautiously)
이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다.
This Document can not beused without Samsung's authorization. 
						

							SENS Q40 < 4 - 3 >
4. Disassembly and Assembly
Part Picture Description
Main
System
10. Afer saparating the LCD Assy,
remove the 3 in 1 Dummy card and
TOP screw(2 EA).
11. Lift up the HDD Connector then
separate HDD FPC andHDD
12. Separate the TOP and Bottom
pulling out the TOP like arrow direction.
(Caution : Separate the Top cautioously not
to be broken.)
13. Separate the Touchpad FPC from
Main Board
’s Connector
이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다.
This Document can not beused without Samsung's authorization.
11. 
						

							SENS Q40 < 4 - 4 >
4. Disassembly and Assembly
Part Picture Description
Main
System
14. Disassemble the Power, Bluetooth,
Speaker, RTC Batt,
Wireless Lan, cable of Docking
Connector (reference the blue mark).
15. Remove the Screws of Option
board(8EA)
16. This is the picture of disassembled
material
17. Remove the screws(5 ea) which
assemble the bottom and main board
And remove the docking connector also
이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다.
This Document can not beused without Samsung's authorization. 
						

							SENS Q40 < 4 - 5 >
4. Disassembly and Assembly
Part Picture Description
Main
System
18. This is the picture of detached main
board from bottom.
19. This is the picture of detached
bottom
20. This is the picture that separate the
docking FPC and speakers
이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다.
This Document can not beused without Samsung's authorization. 
						

							SENS Q40 < 4 - 6 >
4. Disassembly and Assembly
Part Picture Description
LCD
1. Removing the Rubber Foot(4EA).
(
Caution : be careful occuring the
any scratch.)
2. Remove the screws(4EA) indicated at
picture
3. Lift the LCD front(downward direction)
up slowly from the bottom end by using
your hand.
.
4. Remove the Screws(4EA) which
assembled LCD Hinge and screw(2EA)
which assembled LCD inverter board
and screw(1EA) which assembled LCD
cable ring.
이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다.
This Document can not beused without Samsung's authorization. 
						

							SENS Q40 < 4 - 7 >
4. Disassembly and Assembly
Part Picture Description
LCD
5. This is the picture after disassembling
6. Disassemble the LCD Cable and LCD
Invertor
7. Disassemble the screws(4 EA) which
fix the each side of LCD bracket
8. This is the picture after finishing
이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다.
This Document can not beused without Samsung's authorization. 
						

							SENS Q40 < 4 - 8 >
4. Disassembly and Assembly
Part Picture Description
TOP
Assy
1. This is the picture of Top case which
is separate from bottom.
2. Remove the screws(5ea) which fixing
Top and LED FPC then lift up the
Touch pad connector.
3.Separated Top.
4.Separated LED FPC
이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다.
This Document can not beused without Samsung's authorization. 
						

							SENS Q40 < 4 - 9 >
4. Disassembly and Assembly(Main B'd Modem, Bluetooth 분리)
Part Picture Description
Main
Board
1. This is the picture of Main Board
which is separated from bottom.
2.Remove the screws(2ea) which is
fixing Modem and Bluetooth.
3.Separate the Modem like the picture.
4. Separate the Modem cablelike the
picture.
이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다.
This Document can not beused without Samsung's authorization. 
						

							SENS Q40 < 4 - 10 >
Part Picture Description
Main
Board
5. Separate the Bluetooth cable like the
picture.
(Caution : When separate the cable, be
careful do not break down Bluetooth cable.)
6.Remove the screw which is fixing the
3in1Board.
7.Separatethe3in1Boardlikethe
picture.
8. Remove the tape which is attached
on the RTC cable.
이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다.
This Document can not beused without Samsung's authorization.