Samsung Projector Sp P410m User Manual

2-2-2Installation and Connection  
To view the picture when installing the projector behind the screen
To view the picture when installing the projector in the front of the screen
2-2-2 Leveling with Adjustable Feet 
 You may adjust the level of the projector up to 3 degrees.
Depending on the position of the projector, Keystone distortion of the image may appear. 
 
Install a semi-transparent screen.
Select Menu > Setup > Install > Rear-Floor 
Install the projector at the side where you are watching the...

Installation and Connection2-2-3
2-2-3 Zoom and Focus Adjustment 
 If your product is installed at a location out of the specified projection distance (refer to Screen Size and Projection 
Distance), the focus cannot be adjusted correctly.
 
2-2-4 Screen Size and Projection Distance 
Install the projector on a flat, even surface and level the projector using the adjustable feet to realize optimal picture quality.
If images are not clear, adjust them using the Focus Ring, or move the projector forward and...

2-3-1Installation and Connection  
2-3-1 Connecting with a PC 
1.Connect [PC IN] port on the rear side of the projector to the monitor output port of the PC using a PC video cable.
2.When connections are all completed, connect both power cords of the projector and the PC.
3.Connect the [VIDEO/PC AUDIO IN] input port of the projector to the speaker output ports of the PC using an audio cable. 
 This product supports plug and play and therefore, if you use Window XP, you do not need to setup the driver on...

Installation and Connection2-3-2
3.Press the [Advanced] button. Another property window will appear.
4.Click on [Monitor] tab and set the  by referring to  described in the Supported 
Resolution/Size Modes table.
 This will set both the vertical and horizontal frequencies.
5.Click the [OK] button to close the window, and click the [OK] button of the  window to close the window. 
The computer may restart automatically. 
6.Shut down the PC and connect to the projector.
 •Process might vary depending on...

2-3-3Installation and Connection  
2-3-3Supported Display Modes
 If there is no signal input for about twenty (20) seconds while a PC cable is connected, the product is turned off 
automatically. 
 
RESOLUTION
HORIZONTAL 
FREQUENCY 
(KHZ)VERTICAL 
FREQUENCY 
(HZ)CLOCK 
FREQUENCY(MH
Z)
POLARITY 
IBM, 640 x 350 31.469 70.086 25.175 +/-
IBM, 640 x 480 31.469 59.940 25.175 -/-
IBM, 720 x 400 31.469 70.087 28.322 -/+
MAC, 640 x 480 35.000 66.667 30.240 -/-
MAC, 832 x 624 49.726 74.551 57.284 -/-
VESA, 640 x...

Installation and Connection2-4
2-4 Connecting the Power
Rear of Projector 
1.Connect the adapter to the power port. 
2.Connect the power cord to the adapter and connect it to a wall outlet. 
3.When the power is connected, the screen turns on automatically. Do not look at the lens while connecting the power.
 Use only an Samsung authorized adapter.  
2-5 Connecting an A/V device with an audio/video cable 
1.Connect [VIDEO IN(yellow)] input port of the projector to the VIDEO (yellow) OUT port of the video...

2-6Installation and Connection  
2-6Connecting an A/V device with a Component/D-Sub Cable 
1.Connect [PC IN] input port on the rear of the projector to the COMPONENT port of AV equipment using a D-Sub/Component 
cable(Not supplied).
2.Connect audio cable(Not supplied) to the audio input port on the rear of the projector. 
2-7 Connecting a USB Device 
1.Connect your USB device to the USB port at the back of the projector to play videos, photos, and music. 
 Available file system: FAT, FAT32(NTFS is not...

Installation and Connection2-8
Locking the product
1.Insert the locking part of the locking device into the hole of the Kensington lock of the product and turn it in the locking 
direction. 
2.Connect the Kensington Lock cable.
3.Tie the Kensington lock cable to a desk or heavy object.
 You can purchase the locking device from an electronics store or an online shop.  

Using3-1
3Using
3-1 Product Features 
• High Mobility Design 
• Small Size. 
• Lightweight.
• Play 
videos, photos, music using a USB device. 
• Next Generation Backlight Light Source, LED Lamp
• Effective energy saving by using low voltage. 
• Semi-permanent long lifetime guaranteed. 
3-2 Front, Upper 

3-2Using
 •The buttons on the top of the projector are touch buttons. 
Touch them lightly with your fingers to use them.
•When using a tripod, make sure to use one with a screw length of 5.5 mm or less. 
If the screw length is longer than 5.5 mm, you will not be able to fix the projector to the tripod firmly, which may result in 
damage to the projector or tripod. 
•If you use screws to hold the tripod, be sure to use Machine screws M1/4 inch or smaller. 
 
NAMEDESCRIPTION
1.Indicators- TEMP (Red LED) 
-...