Samsung Projector Sp L220 User Manual

							 
To avoid injuries or damage to property, please read the following precautions carefully and use the 
product accordingly. 
Failure to follow the instructions marked with this symbol may cause personal in jury or even fatality.  
Failure to follow the instructions marked with this symbol may cause personal injury or damage to the 
product or property.  
 
 
 
|  Power Related  | 
Installation Related  | 
Cleaning and Use Related  | 
    
 
  
  [The images here are for reference only, and 
are not applicable in all cases (or countries).]
 
 
Insert the power plug firmly so that it does not come loose. 
zWhen the connection is not firm, it may cause a fire.  
   Do not use loose power outlet s or damaged power cables. 
zThere is a danger of electric shock or fire.  
  
Under no circumstances touch the power plug with wet hands. 
zThere is a danger of electric shock.  
  Do not plug multiple devices into a single wall outlet.  
zThere is a danger of fire.  
  
Do not bend the power cord excessiv ely or place heavy objects on it. 
zThere is a danger of electric shock or fire.  
 
Before moving the product, make sure the power is off and remove 
the power cord from the wall outlet. In addition, make sure all 
connection cables are disconnect ed from other devices before 
moving it. 
zMoving the product without disconnect ing the power cord may damage the 
power cord and cause electric shock or fire.  
  
To disconnect the apparatus from th e mains, the plug must be pulled  
						

							out from the mains socket, therefore the mains plug shall be readily 
operable. 
zThere is a danger of electric shock or fire.  
 
  
Always unplug the unit by holdin g the power plug. Pulling the power 
cable may damage the inside of it.  
zThere is a danger of fire.  
  
Unplug the power plug befo re cleaning the product. 
zThere is a danger of electric shock or fire.  
  
 
 
 |  Power Related | 
Installation Related | 
Cleaning and Use Related | 
 
 
 
 
  TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN 
FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.  
zThere is a danger of fire.  
  
When installing the product in a cabinet or on a shelf, make sure the 
front end of the base does not protrude. 
zDropping the product may damage it or cause injury.  
  Keep the power cord away from heaters. 
zThe coating of the power cord may melt and cause electric shock or fire.  
  Do not install the product in locations exposed to oil, smoke, 
moisture or water (rainwater), or in a vehicle. 
zThere is a danger of electric shock or fire.  
  Do not install the product in locations with poor ventilation such as a 
bookshelf, closet, etc. 
zAn increase in the internal temperature may cause a fire.   
						

							  Do not install on an unstable location, or on a stand smaller than the 
product. 
zIf the product falls it may harm children.  Install on a flat and stable location as 
the front part is heavy.  
  
In case of thunder/lightning, disconnect the power cord from the 
wall outlet.  
zThere is a danger of electric shock or fire.  
 
  
Make sure the products vents are  not blocked by a table cloth or 
curtain. 
zAn increase in the internal temperature may cause a fire.  
  
Place the product on the ground carefully. 
z Not doing so may cause damage or injury.  
  Do not drop the product while carrying it. 
zDoing so may cause damage or injury.  
  Keep the product out of children’s reach. 
zIf the product falls it may cause harm to children. Install on a flat and stable 
location as the front part is heavy.  
    
 
 
|  Power Related | 
Installation Related | 
Cleaning and Use Related | 
 
 
 
  
 Do not insert any metal objects su ch as a fork, chopsticks, wires, 
gimlets, or inflammable objects su ch as paper into the vents, the 
PC/COMPOSITE port, the Power  port or the Battery port. 
zThis may cause electric shock or fire.  
If water or an alien substance enters the product, turn the product off,  
						

							disconnect the power cord from a wall outlet and contact a Service Center.  
  
Do not disassemble, or attempt to fix or modify the product. 
zWhen the product requires repairs, contact a  Service Center.  
  
Do not use or keep the product near flammable sprays or other such 
substances.  
zThere is a danger of fire or explosion.  
  
Do not place containers with water, vases, drinks, chemicals, small 
metal parts or heavy objects on the product. 
zIf water enters the product, it may cause  electric shock, or fire and when heavy 
objects fall, they may cause injury.  
  
Do not let children place objects such as toys or cookies on the 
product.  
zIf a child tries to reach for any of these objects, the product may fall and cause 
harm.  
  
Do not look directly at the light of  the lamp nor project the picture 
onto eyes. 
zThis is dangerous; especially for children .  
  
When you remove batteries from the remote, be careful that they are 
not swallowed by children. Keep  batteries out of the reach of 
children.  
zIf swallowed, see a doctor immediately.  
 
  
If the product emits smoke, unusual noise, or there is a burning 
smell,disconnect the power plug immediately, and contact a Service 
Center . 
zThere is a danger of electric shock or fire.  
  
If the power plug pin or jack is  exposed to dust, water or alien 
substances, clean it thoroughly. 
zThere is a danger of electric shock or fire.  
  
When cleaning the product, discon nect the power cord and wipe the  
						

							product using a soft dry cloth. 
zDo not use any chemicals such as wax, be nzene, alcohol, thinners, insecticide, 
air freshener, lubricant or detergent.  
  
When not using the product for an extended period of time, 
disconnect the power plug. 
zOtherwise, this may cause heat emission  from the accumulated dirt or degraded 
insulation, leading to electric shock or fire.  
  
If the product is dropped or the casing is damaged, turn the product 
off and unplug the power cord.  
zThis may cause electric shock or fire. Contact a  Service Center.  
  
Use only specified standard batteries. Do not use new and used 
batteries together.  
zIncorrect polarity may cause a battery to  break or leak and could lead to fire, 
injury, or contamination (damage).  
   Make sure to place your remote  control on a table or desk. 
zIf you step on the remote control, you may fall and hurt yourself or the product 
may be damaged.  
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment) - Europe only 
 
Be sure to contact an authorized  service Center, when installing your 
product in a location with heavy dust, high or low temperatures, high 
humidity, chemical substances and where it operates for 24 hours 
such as the airport, the train station etc.   
zFailure to do so may cause serious damage to your product. 
(Applicable in the European Union and other European countries with separate 
collection systems) 
 
This marking on the product, accessories or literat ure indicates that the product and its electronic 
accessories (e.g. charger, headset, USB cable) should not be disposed of with other household 
waste at the end of their working life. To prev ent possible harm to the environment or human 
health from uncontrolled waste disposal, please separate these items from other types of waste 
and recycle them responsibly to promote the  sustainable reuse of material resources. 
 
Household users should contact ei ther the retailer where they purchased this product, or their 
local government office, for details of where and how they can take these items for 
environmentally safe recycling. 
 
Business users should contact th eir supplier and check the terms an d conditions of the purchase 
contract. This product and its el ectronic accessories should not be mixed with other commercial 
wastes for disposal. 
  
						

							Correct disposal of batteries in this product - Europe only 
(Applicable in the European Union and other European countries with separate battery 
return systems.)  
This marking on the battery, manual or packaging indicates that the batteries in this product 
should not be disposed of with other househol d waste at the end of their working life. Where 
marked, the chemical symbols 
Hg, Cd or Pb indicate that the battery contains mercury, cadmium 
or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed 
of, these substances can cause harm to  human health or the environment.  
To protect natural resources and to promote materi al reuse, please separate batteries from other 
types of waste and recycle them through your local, free battery return system.  
						

							 
 
 |  Product Features | 
Product Views | 
Remote Control  | 
Product Specifications  | 
 
 
 
 
 
 
 
 
 An optical engine adopting new LCD technology  
 
  - 1024 x 768 panel has been adapted.  
- Utilizes a 3P-LCD panel.  
- SP-L250 : Provides a bright screen of 2500 lumen. 
  SP-L220 : Provides a bright screen of 2200 lumen. 
  SP-L200 : Provides a bright screen of 2000 lumen. 
- Compact size, lightweight, and good portability
  
 
 Minimized fan noise  
 
  - Minimizes the noise generated by the product’s fan 
by optimizing the internal air flow and the fan 
installation structure.   
 
 Various input terminals  
 
  - Increases the connectivity to peripheral devices by
 providing various terminals, such as 2 D-Sub 15p 
(supporting DTV signal), S-Vi deo, and Video terminals. 
  
 
 Audio Output  
 
  - There are two stereo speakers on the right  and left and a 5-band equalizer is supported. 
  
 
 User adjustments  
 
  - This unit allows adjust
ment of each input port. 
- The unit has a reference pattern that can be used for positioning and adjustment.   
   
   
 
 
 
|  Product Features | 
Product Views | 
Remote Control  | 
Product Specifications  | 
 
 
 
 
  Front/Upper Side 
  
						

							 
 
 
 
 
 
  
  
1. Indicators 
- STAND BY (Blue LED) 
- LAMP (Blue LED) 
- TEMP (Red LED) 
※ Refer to the  LED Indications . 
  
2. VOL - / + & Select and Move Button 
Adjusts the volume. 
Use this button to move to or select an item within a 
menu. 
  
3. MENU  Button 
Use this button to enter or exit a menu or to move 
forward in a menu.  
  
4. SOURCE Button  
Used to select input si gnals from the external 
sources. 
     
  
5. 
POWER( ) Button  
Used to turn the projector on or off.  
  
6. Lens  
  
7. Remote Control Signal Receiver  
  
8. Focus Ring  
Used for Focus Adjustment. 
  
9. Zoom Knob 
Used to enlarge or reduce image size.
  
10.Lens cover 
 Unpacking   
 
 
Quick Installation Guide / Safety Guide  Warranty Card/ Registration Card 
(Not available in all locations)  User Manual CD  
 
 
 
   
						

							Power Cable Remote Control/ 1 Batteries (CR2025)  
(Not available in all locations)  Cleaning Cloth 
   
   
   
 
  
D-Sub Cable       
  
   
 
 
 
   LED Indications   
 
 :Light is On       :Light is  Blinking      :Light is Off
STAND 
BY  LAMP TEMP 
Information 
If you press the POWER button on the remote control or projector, the screen 
appears within 30 seconds.
The projector is in normal operating condition. 
This state appears when the projector is prep aring an operation after the POWER button on 
the projector or the remote control has been pressed.
The POWER button is pressed to turn off the  projector, and the cooling system is in 
operation to cool off the inside of the  projector. (Operates for about 30 seconds.)
Refer to Action 1 below if the cooling fan insi de the projector is not in normal operation 
condition.
Refer to Action 2 below if the lamp cover protecting the lamp unit is not closed properly.
This indicates that the lens cover does not  open completely. Refer to Action 3 below. 
This indicates that it has changed to Cooling  mode, because the internal temperature of the 
projector has increased beyond the maintenance limit. 
Refer to Action 4 below. 
This indicates that the power is turned off au tomatically because the internal temperature of 
the projector has increased beyond the maintenance limit. Refer to Action 5 below
A problem has occurred with the operation of the lamp. Refer to Action 6.
  
  
    Clearing Indicator Problems   
 
Classification State  Measures 
Action 1  When the cooling fan 
system is not in normal 
operating condition. If the symptom remains even after di
sconnecting and then reconnecting 
the power cord and turning the projec tor on again, contact your product 
provider or our  service center . 
Action 2  When the lamp cover 
protecting the lamp unit is 
not properly closed or the 
sensor system is not in 
normal operating condition. Check if the screws on the side of the projector are correctly locked, and if 
they are locked normally, contact your product distributor or a 
service 
center . 
Action 3  The status that the lens 
cover is not open 
completely.  Open the lens cover completely. 
If the lens cover is not open completely while operating the projector, 
both the video and audio ar
e turned off automatically. 
If this status persists for ten mi nutes, the projector is turned off 
automatically. 
If the internal temperature of the  projector has increased beyond the 
maintenance limit, it is changed to C ooling mode before it is turned off