Samsung Projector Sp H500 User Manual
Have a look at the manual Samsung Projector Sp H500 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Film ModeSupports enhanced screen quality for films of 24 frames. OverscanUsed to display raw input signals from 480p, 576p, 720p, 1080i HD sources or scale to fit to 1280 x 720 resolution after cutting out certain boundaries using software scaling. Picture AdjustmentFilm Mode Picture AdjustmentOverscan41 40 1 MENU2, 3, 4Select2, 3, 4…/†5EXIT 1 MENU2, 3, 4Select2, 3, 4…/†5EXIT Press the MENU button. The main menu is displayed. 1 Press the ▲or ▼button to move to Picture . The Picture menu is displayed. Press the button. 2 Press the ▲or ▼button to move to Film Mode , then press the button. 3 Press the EXIT button to exit the menu. 5 Press the ▲or ▼button to move to On , then press the button. Setup is switched to the selected mode. 4 Press the MENU button. The main menu is displayed. 1 Press the ▲or ▼button to move to Picture . The Picture menu is displayed. Press the button. 2 Press the ▲or ▼button to move to Overscan , then press the button. 3 Press the EXIT button to exit the menu. 5 Press the ▲or ▼button to move to On , then press the button. Setup is switched to the selected mode. 4 Picture Picture Mode : Movie 1 √ Custom Picture √ Picture Size : Full √ Position √ DNIe : Off √ Film Mode : On √ Overscan : On √ Move Enter ReturnPicture Picture Mode : Movie 1 Custom Picture Picture Size : Full Position DNIe : Off Film Mode : On Overscan : On Move Enter Return Off On Picture Picture Mode : Movie 1 √ Custom Picture √ Picture Size : Full √ Position √ DNIe : Off √ Film Mode : On √ Overscan : On √ Move Enter ReturnPicture Picture Mode : Movie 1 Custom Picture Picture Size : Ful Position DNIe : Off Film Mode : On Overscan : On Move Enter Return Off On
Still PictureUsed to pause playback to see a still picture. Picture AdjustmentStill Picture42 Press the STILL button. Each press of the button pauses and resumes play back. One Touch VISUAL REALISM Setup Flipping/Reversal of Projected Image ....44 Light Setting ................................................45 Correcting V-Keystone ..............................46 Test Patterns ..............................................47 Restoring the Factory Default Settings ....48 Information ..................................................49
Flipping/Reversing the Projected ImageTo support positioning of the projector, horizontal/vertical flipping and picture reversal are available. SetupFlipping/Reversing the Projected Image SetupLight Setting 44 45 Press the INSTALL button. The screen will flip over horizontally or vertically with each press of the button. NOTE This function is used to set up reversed image projection for ceiling installation. To install projector, refer to page 14. One Touch 1 MENU3, 4Select2, 4…/†5EXIT 1 MENU2, 3, 4Select2, 3, 4…/†5EXIT Front-Floor Normal Image Front-Ceiling Horizontally Reversed Image Rear-Floor Vertically Reversed Image Rear-Ceiling Horizontal/Vertical Reversed Image Install Menu Press the MENU button. The main menu is displayed. 1 Press the ▲or ▼button to move to Setup . The Setup menu is displayed. 2 Press the button again. Press the ▲or ▼button to move to desired mode, then press the button. Setup is switched to the selected mode. 4 Press the EXIT button to exit the menu. 5 Press the button.Install is selected. 3 Light SettingUsed to set the image brightness by adjusting the amount of light generated by the lamp. Theater Used to reduce the brightness of the lamp in dark ambient light to prevent reflection in the eye. It also lowers power consumption and extends the life of the lamp. Bright Used to enhance the brightness in relatively bright ambient light. Light Setting Mode Press the MENU button. The main menu is displayed. 1 Press the ▲or ▼button to move to Setup . The Setup menu is displayed. Press the button. 2 Press the EXIT button to exit the menu. 5 Press the ▲or ▼button to move to Light Setting , then press the button. 3 Press the ▲or ▼button to move to desired mode, then press the button. Setup is switched to the selected mode. 4 Setup Install : Front-Floor √ Light Setting : Theater √ V-Keystone √ Test Pattern √ PC √ Factory Default √ Information √ Move Enter ReturnSetup Install : Front-Floor Light Setting : Theater V-Keystone Test Pattern PC Factory Default Information Move Enter Return Front-Floor Front-Ceiling Rear-Floor Rear-Ceiling Setup Install : Front-Floor √ Light Setting : Theater √ V-Keystone √ Test Pattern √ PC √ Factory Default √ Information √ Move Enter ReturnLight Setting Theater √ Bright √ Move Enter Return Front-Floor Rear-FloorFront-Ceiling Rear-Ceiling
Correcting Vertical KeystoneUsed to compensate image shape when image distortion occurs. Test PatternsGenerated by the projector itself. Utilized as installation basis for better installation of the projector. SetupCorrecting V-Keystone SetupTest Patterns 4647 Press the V.KEYSTONE button. Press the œor √button to adjust picture image optimally. One Touch 1 MENU2, 3Select2, 3 …/†/œ/√4EXIT 1 MENU2, 3, 4Select2, 3, 4…/†5EXIT NOTE V-Keystone corrects distortion of picture image by software. It is better to install the projector properly to avoid distortion instead of using the V-Keystone feature. Press the MENU button. The main menu is displayed. 1 Press the ▲or ▼button to move to Setup . The Setup menu is displayed. Press the button. 2 Press the EXIT button to exit the menu. 4 Press the ▲or ▼button to move to V-Keystone , then press the button. Press the œor √button to adjust. 3 NOTE The Crosshatch and Screen Size patterns of this projector are provided by JKP (JK Production). The Red/Green/Blue colors of the test patterns are only for the color adjustment procedures, and may not comply with the actual colors displayed during video playback. Press the MENU button. The main menu is displayed. 1 Press the ▲or ▼button to move to Setup . The Setup menu is displayed. Press the button. 2 Press the EXIT button to exit the menu. 5 Press the ▲or ▼button to move to Test Pattern , then press the button. 3 Press the ▲or ▼button to move to desired pattern, then press the button. The selected pattern is displayed. 4Crosshatch You can check whether the picture is distorted or not. Screen Size You can refer to picture format sizes such as 1.33:1 or 1.78:1. Color Standard You can see the change in colours by switching between SMPTE_C, HD and EBU Colour Standards. Refer to page 32. Red Red Screen, only for color adjustment. Green Green Screen, only for color adjustment. Blue Blue Screen, only for color adjustment. White White Screen, only for color adjustment. 6500K_White White Screen, shows brightest white color possible. Test Pattern Menu Setup Install : Front-Floor √ Light Setting : Theater √ V-Keystone √ Test Pattern √ PC √ Factory Default √ Information √ Move Enter Return V-Keystone 0 Setup Install : Front-Floor √ Light Setting : Theater √ V-Keystone √ Test Pattern √ PC √ Factory Default √ Information √ Move Enter ReturnTest Pattern Crosshatch √ Screen Size √ Color Standard √ Red √ Green √ Blue √ † More Move Enter ReturnTest Pattern … More White √ 6500K_White √ Move Enter Return
Restoring the Factory Default SettingsUsed to restore setting values to factory defaults. InformationYou can check external source signals, picture setup, PC picture adjustment and lamp use time. SetupRestoring the Factory Default Settings SetupInformation 4849 Press the INFO button. 1 MENU2, 3, 4Select2, 3, 4…/†/œ/√5EXIT 1 MENU2, 3Select2, 3…/†4EXIT One Touch NOTE User settings includingEdit Name and Custom Picture will be reset. Press the MENU button. The main menu is displayed. 1 Press the ▲or ▼button to move to Setup . The Setup menu is displayed. Press the button. 2 Press the EXIT button to exit the menu. 5 Press the ▲or ▼button to move to Factory Default , then press the button. 3 Press the œor √button to move to OK , then press the button. Setting values are returned to factory defaults. 4 Press the MENU button. The main menu is displayed. 1 Press the ▲or ▼button to move to Setup . The Setup menu is displayed. Press the button. 2 Press the EXIT button to exit the menu. 4 Press the ▲or ▼button to move to Information , then press the button. You can check external source signals, picture setup, PC picture adjustment and lamp use time. 3 Information Input Source : PC Picture Mode : Movie1 Picture Size : Full Brightness : 50 Contrast : 50 Color Temperature : 6500K R-Gain : 50 G-Gain : 50 B-Gain : 50 R-Offset : 0 G-Offset : 0 B-Offset : 0 Color standard : EBU DNIe : On Install : Front-Floor Light Setting : Theater V-Keystone : 0 Coarse : 1344 Fine : 101 Resolution : 1024X768 H-Frequency : 31KHz V-Frequency : 70Hz Lamp Time : 0 Hour OK Setup Install : Front-Floor √ Light Setting : Theater √ V-Keystone √ Test Pattern √ PC √ Factory Default √ Information √ Move Enter Return Factory Default MoveOK Back to Factory Default setting? Cancel EnterReturn Setup Install : Front-Floor √ Light Setting : Theater √ V-Keystone √ Test Pattern √ PC √ Factory Default √ Information √ Move Enter Return Information Input Source : PC Picture Mode : Movie1 Picture Size : Full Brightness : 50 Contrast : 50 Color Temperature : 6500K R-Gain : 50 G-Gain : 50 B-Gain : 50 R-Offset : 0 G-Offset : 0 B-Offset : 0 Color standard : EBU DNIe : On Install : Front-Floor Light Setting : Theater V-Keystone : 0 Coarse : 1344 Fine : 101 Resolution : 1024X768 H-Frequency : 31KHz V-Frequency : 70Hz Lamp Time : 0 Hour OK
VISUAL REALISM Menu Option Setting the Language ..................................52 Setting the Menu Position ..........................53 Setting the Menu Translucency ..................54 Setting the Menu Display Time ..................55 Selecting the Quick Menu ..........................56
53 52 Setting the Language You can select the language used for the menu screen. Setting the Menu PositionYou can move Menu Position to up/down/left/right. Menu OptionSetting the Language Menu OptionSetting the Menu Position 1 MENU3, 4Select2, 4…/†5EXIT 1 MENU2, 3Select2, 3, 4…/†/œ/√5EXIT Press the MENU button. The main menu is displayed. 1 Press the ▲or ▼button to move to Menu Option . The Menu Option menu is displayed. 2 Press the button.The Language is selected. 3 Press the button again. Press the ▲or ▼button to move to desired language, then press the button. Setup is switched to the selected language. 4 Press the EXIT button to exit the menu. 5 Press the MENU button. The main menu is displayed. 1 Press the ▲or ▼button to move to Menu Option . The Menu Option menu is displayed. Press the button. 2 Press the ▲or ▼button to move to Menu Position , then press the button. 3 Press the EXIT button to exit the menu. 5 Press the ▲, ▼, œ, or √ button to move to desired position. The menu screen is displayed on the given position. 4 Menu PositionMove Return…† √ œ Menu Option Language : English √ Menu Position √ Menu Translucency : Opaque √ Menu Display Time : 120 sec √ Move Enter ReturnMenu Option Language : English Menu Position Menu Translucency : Opaque Menu Display Time : 120 Sec Move Enter Return English Deutsch Nederlands Español Français Italiano Svenska† Menu Option Language : English √ Menu Position √ Menu Translucency : Opaque √ Menu Display Time : 120 sec √ Move Enter Return
55 54 Setting the Menu TranslucencyYou can set the translucency of menu. Setting Up the Menu Display TimeYou can set the display time of the menu. Menu OptionSetting the Menu Translucency Menu OptionSetting Up the Menu Display Time 1 MENU2, 3, 4Select2, 3, 4…/†5EXIT 1 MENU2, 3, 4Select2, 3, 4…/†5EXIT Press the MENU button. The main menu is displayed. 1 Press the ▲or ▼button to move to Menu Option . The Menu Option menu is displayed. Press the button. 2 Press the ▲or ▼button to move to Menu Translucency , then press the button. 3 Press the EXIT button to exit the menu. 5 Press the ▲or ▼button to move to desired mode, then press the button. Setup is switched to the selected mode. 4 Press the MENU button. The main menu is displayed. 1 Press the ▲or ▼button to move to Menu Option . The Menu Option menu is displayed. Press the button. 2 Press the ▲or ▼button to move to Menu Display Time , then press the button. 3 Press the EXIT button to exit the menu. 5 Press the ▲or ▼button to move to desired time, then press the button. Setup is switched to the selected time. 4 Menu Option Language : English √ Menu Position √ Menu Translucency : Opaque √ Menu Display Time : 120 sec √ Move Enter ReturnMenu Option Language : English Menu Position Menu Translucency : Opaque Menu Display Time : 120 Sec Move Enter Return Opaque High Medium Low Menu Option Language : English √ Menu Position √ Menu Translucency : Opaque √ Menu Display Time : 120 sec √ Move Enter ReturnMenu Option Language : English Menu Position Menu Translucency : Opaque Menu Display Time : 120 Sec Move Enter Return 5 10 30 60 90 120 Stay On
56 Selecting the Quick Menu Menu OptionSelecting the Quick Menu Press the QUICK button. The menu you used previously will appear. VISUAL REALISM One Touch Connecting to PC Before Connecting to PC ............................58 Setting up the PC Environment ..................59 Connecting to PC ........................................60 Automatic Picture Adjustment ..................62 Frequency Adjustment ................................63 Fine Tuning with the Phase Adjustment ....64 Zooming the Screen ....................................65 Reset the PC ................................................66
Connecting to PCSetting up the PC Environment Before Connecting to PCCheck the following before connecting the projector to a PC. Connecting to PCBefore Connecting to PC5859 1 Click the right mouse button on the Windows wallpaper and click on Properties.Display Propertiestab will appear. 2 Click on Settingstab and set the Screen resolutionby referring to Resolutiondescribed in the display mode table supported by this projector. ■You do not have to change Color qualitysetup. 3 Press the Advancedbutton. Another property window will appear. 4 Click on Monitortab and set theScreen refresh rateby referring to Vertical Frequencydescribed in the display mode table supported by this projector.■Set up both the vertical and horizontal frequency instead of Screen refresh rate. 5 Press the OKbutton to close the window and press the OK button in Display Propertieswindow to close.■The computer might begin restart automatically. 6 Shut down the PC and connect to the projector. (Page 60) 1 234 640 x 350 720 x 400 640 x 480 800 x 600 832 x 864 1024 x 768 1280 x 1024 1920 x 1080i 1280 x 720p 720 x 480p 720 x 576p 720 x 480i 720 x 576i800 x 449 832 x 445 900 x 449 936 x 446 800 x 525 864 x 525 832 x 520 840 x 500 832 x 509 1024 x 625 1056 x 628 1040 x 666 1056 x 625 1048 x 631 1152 x 667 1344 x 806 1328 x 806 1312 x 800 1688 x 1066 2200 x 1125 2640 x 1125 1650 x 750 1980 x 750 858 x 525 720 x 576 858 x 525 864 x 62531.47 37.86 31.47 37.93 31.47 35.00 37.86 37.5 43.27 35.16 37.88 48.08 46.87 53.67 49.73 48.36 56.4 60.02 63.981 33.75 28.125 45 37.5 31.5 31.25 15.73 15.625P P N N N N N N N N/P P P P P N N N P P X X X X X X X X70 85.1 70 85 60 66.7 72.8 75 85 56.3 60.3 72.2 75 85.1 74.6 60 70.1 75 60.02 60 50 60 50 60 50 60 50N N P P N N N N N N/P P P P P N N N P P X X X X X X X X25.175 31.5 28.322 35.5 25.175 30.24 31.5 31.5 36 36 40 50 49.5 56.25 57.284 65 75 78.75 108 74.25 74.25 74.25 74.25 27 27 13.5 13.5O O O O O O O O O O O O O O O O O O O O O O O O O O OO O O O O O O O O O O O O O O O O O X X X X X X X X XX X X X X X X X X X X X X X X X X X X SOY SOY SOY SOY SOY SOY SOY SOY ModeResolution (H x V)Total ResolutionFrequency [KHz]Polarity Horizontal Sync Frequency [Hz]Polarity Vertical Sync Pixel Clock [MHz]Separate CompositeSOG (Sync-On -Green) Sync Type VGA SVGA XGA SXGA HD SD Source PC & DVI PC & DVI & Component Component■Adjust the PC display setting to the resolution and frequency supported by the projector.■Refer to the PC user manual (graphic and sound card) when connecting the projector to PC.■Do not connect power cord until all connections are completed. It may result in damage to the product if you connect power during connection.■Check the graphic card port type installed in PC.Check the following before connecting:Refer to Rear Side and Cables on page 10 for cables used for connection.NOTE The table complies to IBM/VESA requirements and is based on analog signal input. Display modes supported by this projector Setting up the PC EnvironmentNOTE ■Process might vary depending on the type of computers or Windows versions.■This appliance supports up to 32 bits per pixel in Color qualitywhen it is used as a PC monitor. ■Projected images may differ from the monitor depending on monitor manufacture or Windows versions.■If a band or an unusual signal appears on the projector when PC is turned off or disconnected, switch to COMPOSITEmode using the SOURCEbutton or check that PC is properly connected.■When connecting the projector to PC (including DVI connection), check that PC setup complies to display settings supported by this projector. If not, there may be signal problems.