Samsung Projector Sp H500 User Manual

Connecting to PCConnecting to PC
Connecting to PCYou can connect a PC to the projector and use it as a monitor.
Connecting to PCConnecting to PC6061
Turn on the projector and press the PCbutton
to select PC. If the projector is connected to
DVI, press the DVIbutton to select DVI.■If PC Mode is not available, check PC video cable is
in place.Turn on the PC and set the PC Environment
when necessary. (Page 59)
Adjust the screen. (Pages 62~65)
1
2
3NOTE
■Enjoy better picture quality by using DVI-D cable...

Connecting to PCFrequency Adjustment 
Automatic Picture AdjustmentUsed to adjust frequency and phase of PC screen automatically.
Connecting to PCAutomatic Picture Adjustment6263
Before adjusting!Set the input mode to PC.
1
MENU2, 3, 4Select2, 3…/†5EXIT
1
MENU2, 3, 4Select2, 3, 4…/†/œ/√
5EXIT
PC
Press the MENUbutton.The main menu is displayed.
1
Press the ▲or ▼button to move to Setup.The Setupmenu is displayed.Press the  button.
2
Press the ▲or ▼button to move to PC, then
press the  button.The Auto...

Connecting to PCZooming the Screen
Fine Tuning with the Phase AdjustmentUsed to fine tune the PC screen.
Connecting to PCFine Tuning with the Phase Adjustment6465
1
MENU2, 3, 4Select2, 3, 4…/†/œ/√
5EXIT
Before adjusting!Set the input mode to PC.
PC
Press the MENUbutton.The main menu is displayed.
1
Press the ▲or ▼button to move to Setup.The Setupmenu is displayed.Press the  button.
2
Press the ▲or ▼button to move to PC, then
press the  button.The PCmenu is displayed.
3
Press the EXITbutton to exit the...

Connecting to PCReset the PC
Connecting to PCReset the PC67
66
1
MENU
2, 3, 4, 5
Select
2, 3, 4, 5…/†/œ/√
6EXITReset the PCUsed to reset PC mode settings to the Factory Default values.
Before adjusting!Set the input mode to PC.
PC
Press the MENUbutton.The main menu is displayed.
1
Press the ▲or ▼button to move to Setup.The Setupmenu is displayed.Press the  button.
2
Press the ▲or ▼button to move to PC, then
press the  button.The PCmenu is displayed.
3
Press the EXITbutton to exit the menu.
6
Press the...

TroubleshootingBefore Contacting Service Personnel
TroubleshootingBefore Contacting Service Personnel69
68
Screen and External Source
Symptoms
Troubleshooting
Note
Installation and ConnectionMenu and Remote Control
Be sure that the power cord in place and the power switch
on the rear side of the projector is turned on 
-. 
No Power.
Page 15
Be sure to make the projection beam perpendicular to the
screen and adjust the focus using the Zoom Knob and the
Focus Ring. Avoid to use the 
V-Keystone
function if...

VISUAL REALISM
Other Information
Storage and Maintenance
..........................72
Purchasing Optional Parts
........................73
Structure of Screen Menu
..........................74
Lamp Replacement
......................................77
Specifications
..............................................78
Remote Control Specifications
..................79 

Storage and MaintenanceClean and maintain the projector in the following way.
Purchasing Optional PartsInformation for purchasing accessories or optional parts.
Other Information Storage and Maintenance 
Other Information Purchasing Accessories73
72
Cleaning the Projector and LensUse a dry soft cloth.■Do not use flammable materials such as benzene and
thinner. Do not use a wet cloth. It may result in
malfunction.■Do not clean the lens using a fingertip or a sharp object. 
It may leave scratches.Cleaning...

Picture Size Full / Panorama / Zoom1 / Zoom2 / 4:3
Position
DNIe Off / Demo / On
Film Mode Off / On
Overscan Off / On
Structure of Screen MenuYou can see the entire structure of screen menu. 
Other Information Structure of Screen Menu
Other Information Structure of Screen Menu75
Setup
74
Picture Mode Dynamic / Standard / Movie1 / Movie2 /
User1 / User2 / User3 / CustomOpen Menu/Exit MenuPictureSource List Component1 / Component2 / S-Video / Composite / PC / DVI
Edit Name Component1 / Component2 / S-Video...

Language English / Deutsch / Nederlands / Español / Français /
Italiano / Svenska / Português /  / 
Menu Position
Menu Translucency Opaque / High / Medium / Low
Menu Display Time 5 / 10 / 30 / 60 / 90 / 120 / Stay On
Lamp Replacement
Other Information Structure of Screen Menu
Other Information Lamp Replacement77
Detach the screw of the
lamp cover.Push to open the lamp
cover in the direction of
the arrow.Detach the three screws.
Lift and grip the lamp
handle in the direction of
the arrow and pull it...

SpecificationsDesign and specifications of the product may be modified without prior notice for better performance.
This appliance is Class B device that can be used in both residential and industrial areas.
Remote Control Specifications
Other Information Specifications
Other Information Remote Control Specifications
78
79
Size
Resolution
Type
Life Time
Power Consumption
Voltage
Frequency
Brightness 
Contrast (Theatre Mode)
Screen Size
Projection Range
Keystone
DVI
PC
Component 1
Component 2
S-Video...