Samsung Projector Sp D300b User Manual

 
  Connecting a DVD player/Cable/Satellite Box to HDMI/DVI
 
 
 
- Connecting using an HDMI/DVI cable 
Connect the [HDMI/DVI IN] terminal on the back of the projector  and the DVI output terminal of the DVD 
player/Cable/Satellite box using a HDMI/DVI cable.
- Connecting using an HDMI cable
Connect the [HDMI/DVI IN] terminal on the back of the projector  and the HDMI output terminal of the DVD 
player/Cable/Satellite box using a HDMI cable.  
When the connection is finished, connect the power of your...

  
 
 
 
Component Ports are marked as (Y/PB/PR), (Y, B-Y, R-Y) or (Y, Cb, Cr) depending on the manufacturer.
   Connecting to VCR/Camcorder
 
 
 
Connect [VIDEO IN(yellow)] input port of the projector to the V IDEO (yellow) OUT port of video equipment using the 
video cable. 
- If the video equipment has S-VIDEO OUT port, connect it to [S -VIDEO IN] input port of the projector.
Using the S-VIDEO connection, provides a higher visual quality.
When finishing connecting the de vices, connect the power of...

 
 
Connect [PC IN] port on the rear side of the projector to the monitor output port of the PC using a PC video cable. 
 
When connections are all completed, connect both power cords of  the projector and the PC.
This product supports plug and play, therefore you do not need to install a driver on your PC.
    Using the Projector   
  Turn on the projector and press the [PC] button to select .  
If PC Mode is not available, check PC video cable is in place. 
 
Turn on the PC and  set the PC Environment...

 
 
  
 
 
 
[PC IN] input terminal. 

 
 
 |  Input | Picture | Setup | Option | 
 
 
 
 
* Click the Play( )/Stop( ) button in the table below to view the  video file. 
Screen 
Adjustment  Description  Play/Stop 
Source List  You can select a device connecte d to the projector to display. 
  1) Component   4) PC 
2) S-Video  5) HDMI
3) Video   
Edit NameYou can edit the names of device s connected to the projector. 
  1) Component   4) PC 
2) S-Video  5) HDMI
3) Video   
 
 
 
|  Input | Picture | Setup | Option | 
 
  

* Click the Play( )/Stop( ) button in the table below to view the video file. 
Screen 
Adjustment Description  Play/Stop 
ModeSelect a screen state which is customized to your projector or change the screen mode 
as required. 
 
1) Mode
 - Dynamic  
Select this if you want the screen quality to be clearer than standard screen 
quality. 
 -Standard 
You can comfortably view the projection screen if the surrounding is somewhat 
bright. 
 - Movie1, Movie2  
Select this if your surroundings are dark. This...

 defaut setting for Dynamic Picture Mode. The sharpness and brightness are 
emphasized.
 - 9300K : The color temperature appropriate to very bright places such as a shop.
1) Color Temperature  5) R-Offset 
2) R-Gain  6) G-Offset 
3) G-Gain 7) B-Offset 
4) B-Gain  
R-Gain 
G-Gain 
B-Gain 
R-Offset  
G-Offset  
B-Offset
 
8) Gamma : An image compensation function that controls the settings according to the 
video properties. 
 
 -Film : The best setting for watching a film.
 -Video : The best setting for...

▶ Refer to "Size Support Mode". 
 
 1) Off
 2) On
Film Mode Using this function, you can set the display mode optimized for playing movies. 
▶ Film Mode is only supported for [Video], [S-Video] and [Component]. 
 
 1) Off
 2) On
 
 
 
| Input| Picture| Setup| Option| 
 
 
* Click the Play( )/Stop( ) button in the table below to view the video file. 
Screen 
Adjustment Description  Play/Stop 
InstallTo tailor the picture to the installation location, you can invert the projected images...

 
 
Test PatternGenerated by the projector itself. Utilized as standard to optimize the installation of the 
projector. 
 
 1) Crosshatch : You can check whether the picture is distorted or not.
 2) Screen Size : You can refer to picture format sizes such as 1.33:1 or 1.78:1.
 3) Red : Red Screen, only for color adjustment.
 4) Green : Green Screen, only for color adjustment.
 5) Blue : Blue Screen, only for color adjustment.
 6) White : White Screen, only for color adjustment.
 7) 6500K_White : White...

* Click the Play( )/Stop( ) button in the table below to view the video file. 
Screen 
Adjustment Description  Play/Stop 
LanguageYou can select the Language used for the menu screen. 
 
Menu Position You can move Menu Position up/down/left/right. 
 
Menu 
TranslucencyYou can set the translucency of menu. 
 
1) Opaque
2) Low
3) Medium
4) High
Menu Display 
TimeYou can set the display time of the menu. 
 
1) 5 sec 5) 90 sec
2) 10 sec 6) 120 sec
3) 30 sec 7) Stay On 
4) 60 sec  
LED IndicatorThis function...