Samsung Plasma TV UN51ES6500 User Manual

 NYou can adjust and store settings for 
each external device connected to 
the TV.
 NLowering picture brightness reduces 
power consumption. 

Changing the Picture SizeScreen Adjustment
Menu  → Picture 
→ Screen Adjustment
Using this function, you can select 
various picture size and aspect ratio 
options.
 ●Picture Size
If you have a cable box or satellite 
receiver, it may have its own set of 
screen sizes as well. However, we 
highly recommend you use your TV's  

16:9 mode most of the time.
16:9: Sets the picture to the 16:9 wide 
screen format.
Zoom1: Provides moderate 
magnification of the picture. Sides, top, 
and bottom are cut off.
Zoom2: Provides larger magnification 
of the picture. Sides, top, and bottom 
are cut off.
Wide Fit: Enlarges the aspect ratio of 
the picture so it fits the entire screen. 

 NAvailable with HD 1080i / 720p 
signals in 16:9 mode.
4:3: Sets the picture to basic (4:3) 
mode.
 NDo not set your TV to 4:3 format for 
a long time. The borders displayed 
on the left and right, or top and 
bottom of the screen may cause 
image retention (screen burn) which 
is not covered by the warranty.
Screen Fit: When your TV inputs HDMI  

(720p / 1080i / 1080p) or Component 
(1080i / 1080p) signals, displays the full 
image without any cut-off.Smart View 1: Reduces the 16:9 picture 
by 50%. 
 for LED TV 
Smart View 2: Reduces the 16:9 picture 
by 25%. 
 for LED TV 
 NSmart View 1 is enabled only in 
HDMI mode.
 NSmart View 2 is enabled only in 
HDMI or DTV mode. 

 NThe picture size can vary when 
you play content from Videos in 
AllShare Play depending on the input 
resolution.
 ●Position
Adjusts the picture position.  Position 
is only available if Picture Size is set to 
Zoom1, Zoom2, Wide Fit, or Screen Fit.
 NIn DTV mode, Position is not 
available when Picture Size is set to 
Screen Fit. 

To use the Position function after 
selecting Zoom1, Zoom2, Wide Fit or 
Screen Fit, follow these steps:1.
 Se

lect Position.
2.
 On 

the Position screen, select 
Position, and then move the picture 
to the position you want using your 
remote.
3.
 Wh

en done, select Position again, 
and then select Close.
 NTo reset the picture position,  

select Reset.
Picture Sizes available by Input Source:
 – A

TV, AV: 16:9, Zoom1, Zoom2, 4:3
 – Compon

ent (480i, 480p):  16:9, 
Zoom1, Zoom2, 4:3
 – DTV (720p): 
16:9

, Wide Fit, 4:3, 
Smart View 2 
 for LED TV 
 – DTV (1080i, 1080p): 
16:9 , Wide Fit, 
4:3, Screen Fit, Smart View 2 
 for LED 
TV
 – Component(720p): 16:9, 
Wide Fit, 4:3 

 –Component(1080i, 1080p): 16:9, Wide 
Fit, 4:3, Screen Fit
 – HDMI (720p, 1080i, 1080p): 
16:9

, 
Wide Fit, 4:3, Screen Fit, Smart View 
1 
 for LED TV , Smart View 2  for LED TV 
 NDepending on the input source, the 
picture size options may vary.
 NThe available items may differ 
depending on the selected mode.
 NHD (High Definition): 16:9 - 
1080i/1080p (1920x1080), 720p  

(1280x720)
 NYou can adjust and store settings 
for each external device you have 
connected to an input on the TV. 
Select the Source, and then adjust 
the settings.