Samsung Plasma HDTV PN60E8000 User Manual
Have a look at the manual Samsung Plasma HDTV PN60E8000 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Enable or disable the Motion Control function. Lets you control your TV by moving the TV cursor using specific motions. NMotion Control function can be affected recognition by motion posture, or ambient brightness conditions. NSome applications may not support Motion Control. NYou may experience physical fatigue
when you use the Motion Control for a long time. NTo use the Motion Control, please avoid direct sunlight. NWe are recommended using Motion Control function within about 5 ― 13 ft with your TV. TV Camera's recognition range may differ depending on the angle of camera or other conditions. You can check the recognition range of TV camera by
using Motion Control Environment Test (System → Voice and Motion Control → Motion Control → Motion Control Environment Test ). ●Motion Control Turns the Motion Control function on or off. ●Motion Guide Bar Size Set the Motion Guide Bar Size mode to Minimum or Full. ●Motion Control Environment Test
You can test the brightness of room and the camera angle. – Brightness Test: This test checks to see if your room is bright enough for Motion Control to work properly. Select Start using your remote. The test starts and takes a few seconds. (Appropriate ambient brightness: 50 – 500 Lux) NDo not illuminating a sunlight or lights directly into the camera lens.
NMake sure that the camera lens is cloaked by an object. – Camera Angle Test: On the Camera Angle Test screen, select Start using your remote. A rectangle appears on the screen. Move yourself into the rectangle by adjusting the camera or moving yourself in front of the camera. If you are not within the rectangle position, the test may not work properly. After aligning your
body with the TV, raise your hand while opening it toward the screen, hold it for a moment and then wave it 3~4 times to the left and right. To use the Motion Control function, follow these steps: 1. To use the Motion Control, raise your hand while opening it toward the screen, hold it for a moment and then wave it 3~4 time to the left and right. Motion Control starts. If the
Motion Control starts, the cursor is displayed at the center of the screen and the Motion Guide Bar Size is at the bottom of the screen. 2. Control the TV using your hands. For the useable motions, see below. NNote that the Motion Control function closes if your hands go out of the camera range. NWhile using the Motion Control, if you use the other devices (i.e.
remote control, keyboard, etc.), Motion Control closes. Controlling the TV with your hands using motions ● Access Motion Control – Action : Spread your hand in the direction of the camera, and shake it three or four times from a side to side. ● Pointing Navigation Moves the cursor to the position you
want. – Action : Spread your hand and guide the cursor to position you want. ● Run Selects an item or executes a command that is indicated by the cursor or is highlighted. – Action : Clench your fist. NWhen you are viewing a page, you can use the Run motion to move the page in the direction you want. To move a page, clench your fist,
keep it clenched, and then move it in the direction you want the page to move. Note that not all pages can be moved. ● Return Return to the previous menu. – Action : Spread your hand and rotate it counterclockwise. ●Channel / Volume Control Changes the channel or adjust the volume.