Samsung Plasma E7000 User Manual

Turns the Voice Control function on or 
o f f.
 
NThe VOICE ˜ button on your remote 
is always activated.
 
●Language
Select the recognition language you 
want to use.
 
●Trigger Words
You can select the trigger words 
that start the Voice Control function. 
Alternatively you can turn on your TV  

using the Trigger Words if Voice Control 
function is set to  On.
 
– If 
Trigger Words is set to  Hi TV, say 
Hi TV Power On.
 
– If 
Trigger Words is set to  Smart TV, 
say  Smart TV Power On.
 
●Voice Command Bar Size
Set the Voice Command Bar Size mode 
to  Minimum  or Full. Minimum  displays 
the least number of words and phrases 
you can use.  Full displays all the words  

and phrases.
 
●Voice Sensitivity
You can configure the sensitivity of 
Voice recognition.
Howling:  Select howling levels.
Recognition responsiveness:  Select 
the responsiveness level of Voice 
recognition.
 
●Voice Control Environment Test
You can test the amount of ambient 
noise level detected by the TV  

microphone. 
– Noise Test
: This test checks the 
amount of ambient noise detected 
by the TV microphone. Too much 
ambient noise will prevent Voice 
Command from functioning. To run, 
select  Next using your remote. The 
test starts and takes a few seconds. 
Please keep as quiet as possible 
during the test.
 
– Mic & Speaker Test: Determines  

if the sound from the TV speakers 
picked up by the TV microphone 
will disrupt Voice Command. To run, 
select Start using your remote. The 
test starts and takes a few seconds. 
Please keep as quiet as possible 
during the test.
 
NAvailable only when Speaker 
Select  is set to TV Speaker .
 
– Voice Control Test: This test checks 
the volume level and clarity of your  

voice for use with Voice Control. 
Select Start using your remote. After 
the test starts, say the test words 
listed in the instructions as loudly 
and clearly as you can.
 
NIf the test is not successful, select 
Retest , and then say the words 
loudly and clearly again.
To use the Voice Control function, follow 
these steps:
 
NIf  Voice Control function is set to On, the  

TV may be turned on automatically by 
effect of the ambient environment.1.  
Say  the  Trigger Words that you 
selected into the microphone 
embedded in the TV or press the 
VOICE
˜ button on your Smart Touch 
Control. The TV displays the Voice 
Command Bar Size.
 
NWhen you use Voice Control, 
the TV's volume is set to 5 
automatically. 

2. 
Say a word or phrase listed in the 
Voice Command Bar Size.
 
NPronounce the word or phrase 
clearly and correctly in the 
language you selected in 
Language.
3.  
Wait until recognition is complete, 
and then say the next command in 
the same fashion.
 
NTo exit the Voice Control mode, 
say the Trigger Words or "Cancel"  

using the TV's microphone or 
press the RETURNR button.
Using the Voice Text Input Mode 1. 
Say "Search All" while in the Voice 
Control mode.
 
NWhen you use a  QWERTY keypad 
screen, you can use the Voice 
Text Input Mode. Say the Trigger 
Words that you selected into the 
microphone embedded in the TV 
or press the VOICE
˜ button on  

your Smart Touch Control. You 
cannot use it for some UIs such 
as URL input boxes.
2.  
Say the word or phrase you wish to 
search for.
3.  
The TV executes the spoken function.
 
NVoice Control performance levels will 
vary based on the language spoken.
Motion Control
Menu  → System
 
→  Voice and Motion 
Control  → Motion Control