Samsung ML 2955ND User Manual

Basic printing412. Menu overview and basic setup
1Change the settings as needed on each tab. 
2 Enter a name for the item in the Presets input box.
3 Click  (Add). When you save Presets, all current driver 
settings are saved.
 
Select more options and click   (Update), settings will be 
added to the Presets you made. To use a saved setting, select 
it from the Presets drop-down list. The machine is now set to 
print according to the settings you have selected. To delete 
saved settings, select it from...

Basic printing422. Menu overview and basic setup
Setting eco mode on the control panel
 
• The settings set from the machine’s driver override the 
settings on the control panel.
•  If you set the eco mode on with a password from the 
SyncThru™ Web Service (Settings tab > Machine Settings 
> System > Eco > Settings), the Onforce message 
appears. You have to enter the password to change the 
eco mode status.
 
1Press  (Eco) button on the control panel. 
When the LED on the button lights up, the Eco mode...

3. Maintenance
This chapter provides information about purchasing supplies, accessories 
and maintenance parts available for your machine.
• Ordering supplies and accessories 44
• Available supplies 45
• Available maintenance parts 46
• Redistributing toner 47
• Replacing the toner cartridge 48
• Cleaning the machine 50
Downloaded From ManualsPrinter.com Manuals 

443. MaintenanceOrdering supplies and accessories
 
Available accessories may differ from country to country. Contact your sales representatives to obtain the list of available supplies, and 
maintenance parts.
 
To order Samsung-authorized supplies, accessories, and maintenance parts, contact your local Samsung dealer or the retailer where you 
purchased your machine. You can also visit www.samsung.com/supplies, and then select your country/region to obtain the contact 
information for service....

453. MaintenanceAvailable supplies
When supplies reach the end of their life spans, you can order the 
following types of supplies for your machine:
 
Depending on the options, percentage of image area, and 
job mode used, the toner cartridge’s lifespan may differ.
 
 
When purchasing new toner cartridges or other supplies, 
these must be purchased in the same country as the machine 
you are using. Otherwise, new toner cartridges or other 
supplies will be incompatible with your machine due to 
different...

463. MaintenanceAvailable maintenance parts
To purchase maintenance parts, contact the source where you bought the machine. Replacing maintenance parts can be performed only by 
an authorized service provider, dealer, or the retailer where you bought the machine. The warranty does not cover the replacement of any 
maintenance parts once it has reached its “Average yield”.
Maintenance parts are replaced at specific intervals to avoid print quality and paper feed problems resulting from worn parts, see...

473. MaintenanceRedistributing toner
When the toner cartridge is near the end of its life:
• White streaks or light printing occurs  and/or density variation side to side.
•The  Toner LED blinks yellow. 
If this happens, you can temporarily improve  print quality by redistributing the remaining toner in the cartridge. In some cases, white streaks 
or light printing will sti ll occur even after you have redistributed the toner.
 
• Before opening the front cover,  close the output support first.
• If...

483. MaintenanceReplacing the toner cartridge
 
• Before opening the front cover, close the output support first.
• Do not use sharp objects such as a knife or scissors to open the toner cartridge package. They might scratch the drum of the cartridge.
• If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric.
• Shake the toner cartridge thoroughly, it will increase the initial print quality.
• Do not touch the green underside of the...

Replacing the toner cartridge493. Maintenance
When a toner cartridge has reached the end of life, the machine will stop printing.
1 
 2 
Downloaded From ManualsPrinter.com Manuals 

503. MaintenanceCleaning the machine
If printing quality problems occur or if you use your machine in a dusty environment, you need to clean your machine regularly to keep it in 
the best printing condition and use your machine longer.
 
• Cleaning the cabinet of the machine with cleaning materials containing large amounts of alcohol, solvents, or other strong substances 
can discolor or distort the cabinet. 
• If your machine or the surrounding area is contaminated with toner, we recommend you use a...