Samsung ML 2955ND User Manual

Wireless network setup412. Using a network-connected machine
14 After the installation is finished, a window asking you to print 
a test page appears. If you want to print a test page, click Print 
a test page.
Otherwise, just click Next and go to step 16.
15 If the test page prints out correctly, click Yes.
If not, click No to reprint it.
16 To register as a user of the machine in order to receive 
information from Samsung, click On-line Registration.
17 Click Finish.
Ad hoc via USB cable
If you do not...

Wireless network setup422. Using a network-connected machine
4 Select the Wireless Setting and Installation option.
•Install Now: If you have set the wireless network, click this 
button to install the machine’s driver to use the wireless 
network machine. If you have not set the wireless network, 
click Wireless Setting and Installation button to set the 
wireless network before you click this button. 
•Wireless Setting and Installation: Configure the wireless 
network settings of your machine’s with a...

Wireless network setup432. Using a network-connected machine
•Authentication: Select an authentication type.
Open System: Authentication is not used, and encryption 
may or may not be used, depending on the need for data 
security.
Shared Key: Authentication is used. A device that has a 
proper WEP key can access the network.
•Encryption: Select the encryption (None, WEP64, 
WEP128).
•Network Key: Enter the encryption network key value.
•Confirm Network Key: Confirm the encryption network 
key value....

Wireless network setup442. Using a network-connected machine
 
Before entering the IP address for the machine, you must 
know the computer’s network configuration information. If 
the computer’s network configuration is set to DHCP, the 
wireless network setting should also be DHCP. Likewise, if 
the computer’s network configuration is set to Static, the 
wireless network setting should also be Static.
If your computer is set to DHCP and you want to use the 
Static wireless network setting, you must...

Wireless network setup452. Using a network-connected machine
12 Select the components to be installed. Click Next.
After selecting the components, you can also change the 
machine name, set the machine to be shared on the network, 
set the machine as the default machine, and change the port 
name of each machine. Click Next.
13 After the installation is finished, a window asking you to print 
a test page appears. If you want to print a test page, click Print 
a test page.
Otherwise, just click Next and...

Wireless network setup462. Using a network-connected machine
7  Click Continue.
8 Read the license agreement and click Continue.
9 Click Agree to agree to the license agreement.
10 When the message that warns that all applications will close 
on your computer appears, click Continue.
11 Select the Wireless Network Setting.
12 The software searches the wireless network.
 
If the search has failed, you may check if the USB cable is 
connected between the computer and machine properly, 
and follow the...

Wireless network setup472. Using a network-connected machine
The wireless network security window appears when the 
access point has security setting.
The wireless network security window appears. The window 
may differ according to its security mode: WEP or WPA.
•WEP
Select Open System or Shared Key for the authentication 
and enter the WEP security key. Click Next.
WEP (Wired Equivalent Privacy) is a security protocol 
preventing unauthorized access to your wireless network. 
WEP encrypts the data...

Wireless network setup482. Using a network-connected machine
- Subnet Mask: 255.255.0.0 (Use the computer’s subnet 
mask.)
- Gateway: 169.254.133.1
15 The wireless network connects according to the network 
configuration.
16 When the wireless network settings are completed, 
disconnect the USB cable between the computer and 
machine. 
17 Follow the instructions on the screen to complete the 
installation. After the installation is finished, click Quit or 
Restart.
Ad hoc via USB cable
If you do not have...

Wireless network setup492. Using a network-connected machine
 
If the search has failed, check if the USB cable is connected 
between the computer and machine properly, and follow 
the instructions in the window.
 
12 After searching the wireless networks, a list of wireless 
networks your machine has searched appears. 
If you want to use the Samsung default ad hoc setting, select 
the last wireless network on the list, which Network 
Name(SSID) is portthru and Signal is Printer Self Network.
Then, click...

Wireless network setup502. Using a network-connected machine
13 The window showing the wireless network settings appears. 
Check the settings and click Next.
 
Before entering the IP address for the machine, you must 
know the computer’s network configuration information. If 
the computer’s network configuration is set to DHCP, the 
wireless network setting should also be DHCP. Likewise, if 
the computer’s network configuration is set to Static, the 
wireless network setting should also be Static.If your...