Samsung ML 1645 User Manual

ML-1640 Series
ML-2240 Series
Mono Laser Printer
User’s Guide
imagine the possibilities
Thank you for purchasing a Samsung product. 
Downloaded From ManualsPrinter.com Manuals 

2_Features of your new laser product
features of your new laser product
Your new machine is equipped with a number of special features that improve the quality of the documents you print.
With the machine, you can:
Print with excellent quality and speed
• You can print with a resolution of up to 1200*600 dpi.
• Your machine prints A4-sized paper at up to 16 ppm,(ML-
1640 series), 22 ppm (ML-2240 series) and lettersized 
paper at up to 17ppm (ML-1640 series), 23ppm(ML-2240 
series). 
Handle many different...

Features of your new laser product_3
FEATURES BY MODELS
The machine is designed to support all of your document needs.
Basic features of this machine include;
( : Included) 
ABOUT THIS USER’S GUIDE
This user’s guide provides information about basic understanding of the machine as well as detailed explanation on each step during the actual usage. Both novice 
users and professional users can refer to this guide for installing and using the machine.
Some terms in this guide are used interchangeably, as...

4_Features of your new laser product
FINDING MORE INFORMATION
You can find information for setting up and using your machine from the following resources, either as a print-out or onscreen.
Please visit www.samsung.com for open source information. Quick Install GuideProvides information on setting up your machine and this requires that you follow the instructions in the guide to prepare the machine.
Online User’s GuideProvides you with step-by-step instructions for using your machine’s full features, and...

Safety information_5
safety information
IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS
What the icons and signs in this user’s guide mean:
These warning signs are here to prevent injury to you and others. Follow them explicitly. After reading this section, keep it in a safe 
place for future reference. WARNINGHazards or unsafe practices that may result in severe personal injury or death.
CAUTIONHazards or unsafe practices that may result in minor personal injury or property damage.
CAUTIONTo reduce the risk of...

6_Safety information
LASER SAFETY STATEMENT
The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, chapter 1 Subchapter J for Class I(1) laser products, and 
elsewhere is certified as a Class I laser product conforming to the requirements of IEC 825.
Class I laser products are not considered to be hazardous. The laser system and printer are designed so there is never any human access to 
laser radiation above a Class I level during normal operation, user maintenance or...

Safety information_7
OZONE SAFETY
During normal operation, this machine produces ozone. The ozone produced does not present a hazard to the operator. However, it is 
advisable that the machine be operated in a well ventilated area.
If you need additional information about ozone, request your nearest Samsung dealer.
RECYCLING
Recycle or dispose of the packaging material for this product in an environmentally responsible manner.
CORRECT DISPOSAL OF THIS PRODUCT (WASTE ELECTRICAL & ELECTRONIC EQUIPMENT)...

8_Safety information
REPLACING THE FITTED PLUG (FOR UK ONLY)
Important
The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug and has a 13 amp fuse. When you change or examine the 
fuse, you must re-fit the correct 13 amp fuse. You then need to replace the fuse cover. If you have lost the fuse cover, do not use the plug until 
you have another fuse cover. 
Contact the people from you purchased the machine.
The 13 amp plug is the most widely used type in the UK and should be...

Contents_9
contents
2 Features of your new laser product
5 Safety information
INTRODUCTION
11
 11 Printer overview
11 Front view
11 Rear view
 12 Control panel overview
 13 Understanding the control panel
13 On-Line/Error LED
13Cancel button
 14 Supplied software
 14 Printer driver features
14 Printer driver
GETTING STARTED
15
 15 Setting up the hardware
 15 Printing a demo page
 16 System requirements
16 Windows
16 Macintosh
 17 Installing the software
SELECTING AND LOADING PRINT MEDIA
18
 18 Selecting...

10_Contents
33 Printing problems
35 Printing quality problems
37 Common Windows problems
37 Common Linux problems
38 Common Macintosh problems
ORDERING SUPPLIES AND ACCESSORIES
39
 39 Supply
 39 Maintenance parts
 39 How to purchase
SPECIFICATIONS
40
 40 ML-1640 Series specifications
 41 ML-2240 Series Specifications
GLOSSARY
42
INDEX
46
Downloaded From ManualsPrinter.com Manuals