Samsung Md230x6 User Manual

Installing the Software4-2
2.Double-click the [Add or Remove Programs] icon in the Control Panel. 
3.In the [Add/Remove] window, find and select MagicTune™ so that it is highlighted. 
4.Click [Change or Remove Programs] to remove the software. 
5.Select [Yes] to start removing MagicTune™. 
6.Wait until a message box appears informing you that the software has been removed completely. 
 For technical support, the FAQ (frequently asked questions) or information about the software upgrade for MagicTune™,...

4-3Installing the Software  
4-3 MultiScreen
What is MultiScreen ?
MultiScreen enables users to use the monitor by partitioning multiple sections.
Installing the Software
1.Insert the installation CD into the CD-ROM drive. 
2.Select the MultiScreen setup program.
 If the pop-up screen for the software installation does not appear on the main screen, find and double-click the 
MultiScreen setup file on the CD-ROM.
 
3.When the Installation Wizard appears, click [Next].
4.Complete the remaining software...

Troubleshooting5-1
5 Troubleshooting
5-1 Monitor Self-Diagnosis
 • You can check if the product is working properly using the Self-Diagnosis function.
• If a blank screen is displayed and the Power LED blinks even if the product and the PC are properly connected, perform 
the self-diagnosis function according to the procedures below.
 
1.Turn the product and the PC off.
2.Separate the D-Sub cable from the product . 
3.Turn the product on. 
4.If the product is working properly, the Check Signal Cable...

5-2Troubleshooting
5-2 Before Requesting Service
 Please check the following before requesting After-Sales service. If the problem continues, please contact your nearest 
Samsung Electronics Service Center.
 
A BLANK SCREEN APPEARS / I CANNOT TURN THE PRODUCT ON
Is the power cord connected properly? Check the connection status of the power cord.
Is the “Check Signal Cable” message displayed on the screen?Check the cable connecting the PC and the product.
If the message keeps appearing even though the...

Troubleshooting5-2
THE COLOR IS DISPLAYED IN 16 BIT (16 COLORS). THE COLOR HAS BEEN CHANGED AFTER CHANGING THE GRAPHICS 
CARD.
Did you install the device driver for the product?
Windows XP : Set the color again by selecting Control Panel → 
Appearance and Themes → Display → Settings. 
Windows ME/2000 : Set the color again by selecting Control Panel 
→ Display → Settings. 
Windows Vista : Change the color settings by selecting Control 
Panel 
→ Appearance and Personalization → Personalization → 
Display...

5-3Troubleshooting
5-3 FAQ
FAQ!PLEASE TRY THE FOLLOWING!
How can I change the frequency (refresh rate) of the video signal? You have to change the frequency of the graphics card.
Windows XP : Change the frequency by selecting Control Panel 
→ Appearance and Themes → Display → Settings → 
Advanced → Monitor, and then change the refresh rate under 
Monitor Settings. 
Windows ME/2000 : Change the frequency by selecting Control 
Panel  
→ Display  → Settings → Advanced → Monitor, and 
then change the refresh...

More Information6-1
6 More Information
6-1 Specifications
MODEL NAMEMD230 / MD230X3 / MD230X6
LCD PanelSize 23 inch (58 cm)
Display area 509.76 mm (H) x 286.74 mm (V) (20.07 inch x 11.29 inch)
Pixel Pitch 0.2655 mm (H) x 0.2655 mm (V) (0.01 inch x 0.01 inch)
SynchronizationHorizontal 30~81 kHz
Vertical 56~60 Hz
Display Color 16.7M
ResolutionOptimum resolution 1920 x 1080 @ 60 Hz
Maximum resolution 1920 x 1080 @ 60 Hz
Maximum Pixel Clock 186 MHz (Analog, DVI, Display Port)
Power Supply
This product...

6-1More Information 
 Design and specifications are subject to change without prior notice.
 
[U.S. Only]
Dispose unwanted electronics through an approved recycler. 

To find the nearest recycling location, go to our website, 
www.samsung.com/recyclingdirect, or call (877) 278 - 0799
 

More Information6-2
6-2 Power Saving Function
This product provides a power saving function that automatically turns the screen off when the product is not used for a predetermined 
period of time to reduce power consumption. 
When the product is in power saving mode, the power is not turned off and you can turn the screen on again by pressing any key or clicking 
the mouse. However, the power saving function only works when the product is connected to a computer that provides the power saving...

6-3 Contact SAMSUNG WORLDWIDE
 If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. 
NORTH AMERICA
CANADA1-800-SAMSUNG (726-7864)http://www.samsung.com
MEXICO 01-800-SAMSUNG (726-7864)http://www.samsung.com
U.S.A 1-800-SAMSUNG (726-7864)http://www.samsung.com
LATIN AMERICA
ARGENTINA 0800-333-3733http://www.samsung.com
BRAZIL 0800-124-421
4004-0000http://www.samsung.com
CHILE 800-SAMSUNG (726-7864)http://www.samsung.com
COLOMBIA 01-8000112112...