Samsung Ln T4671F Tft Lcd Television Owners Instructions

English - 
How to Set up Restrictions Using the MPAA Ratings: G, PG, PG-1, R, NC-17, x, NR
The MPAA rating system uses the Motion Picture Association of America (MPAA) system and its main application is for movies. When the V-Chip lock is on, the TV will automatically block any programs that are coded with objectionable ratings  (either MPAA or TV-Ratings).
1.	Press the MENU button to display the menu. 
    Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
2.	Press...

English - 60
How to Set up Restrictions Using the ‘Canadian English’
1.	Press the MENU button to display the menu. 
    Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
2.	Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER button. 
    The message “Enter PIN” will appear. Enter your 4 digit PIN number.
3.	The “V-Chip” screen will appear. Press the ▲ or ▼ button to select 
    “Canadian English”, then press the 
ENTER button.
4.	Press the ▲ or ▼ button to select a...

English - 61
How to Set up Restrictions Using the ‘Canadian French’
1.	Press the MENU button to display the menu. 
    Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
2.	Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER button. 
    The message “Enter PIN” will appear. Enter your 4 digit PIN number.
3.	The “V-Chip” screen will appear. Press the ▲ or ▼ button to select 
    “Canadian French”, then press the 
ENTER button.
4.	Press the ▲ or ▼ button to select an...

English - 62
1.	Press the MENU button to display the menu. 
    Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
2.	Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER button. 
    The message “Enter PIN” will appear. Enter your 4 digit PIN number.
3.	The “V-Chip” screen will appear. Press the ▲ or ▼ button to select 
    “Downloadable U.S. Rating”, then press the ENTER button.    If information is not downloaded from the broadcasting station, the...

English - 6
1. Insert a USB drive containing the firmware upgrade into the WISELINK port on  
  the side of the TV.
	2. Press the MENU button to display the menu. 
  Press the ▲ or ▼ button to select Setup, then press the ENTER button.							3. Press the ▲ or ▼ button to select Software upgrade, then press the ENTER button.	4. Press the ENTER button. 
  The message Scanning for USB... It may take up to 30 seconds. is displayed. 
  Please be careful to not disconnect the power or remove the USB...

English - 64
WISELINK
Using the WISELINK Function
This function enables you to view and listen to photo (JPEG) and audio files (MP3) saved on a USB Mass Storage Class(MSC) device.
Press the POWER button on the remote control or front panel.  Connect a USB device containing JPEG and/or MP3 files to the WISELINK jack (USB jack) on the side of the TV.
Using the Remote Control button in WISELINK Menu 
  If you enter the WISELINK mode with no USB device connected the message “There is no device connected”...

English - 6
1.	Press the MENU button. Press the ▲ or ▼ button to select “Input”, 
    then press the ENTER button.
2.	Press the ▲ or ▼ button to select “WISELINK”, then press the ENTER button.
3.	 Press the ▲ or ▼ button to select the corresponding USB Memory Device, then   
    press the ENTER button.
 The WISELINK menu differs depending on the USB Memory Device 
    connected to TV.
4.	Press the ◄ or ► button to move to an icon, then press the ENTER button.
    To exit WISELINK mode, press the...

English - 66
1.	Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 65)
2.	Press the ◄ or ► button to move to “Photo”, then press the ENTER button.  
    The saved file information is displayed as a folder or file.
3.	Press the ▲, ▼, ◄ and ► buttons to select a file, then press the ENTER button.
 • Pressing the ENTER  button over a photo icon shows the currently selected photo   
    in full screen. 
  • Pressing the ENTER  button over a folder icon shows the JPEG files included in...

English - 67
Selecting a Photo and Slide Show
1.	Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 65)
2.	Press the ◄ or ► button to move to “Photo”, then press the ENTER button.  
    The saved file information is displayed as a folder or file.
3.	Press the INFO button to display “Start Slide Show” or “Deselect All”.
4.	Press the ▲ or ▼ button to select “Start Slide Show”, then press the ENTER button. 
    
    During the slide show, files are displayed in order from the currently...

English - 68
Using the Menu during a Slide Show
Slide Show Speed:
Select to control the slide show speed.
You can select "Slow", "Norm" or "Fast".
background Music:
Select to choose whether you want to play an MP3 file during a slide show.
You can select Music "ON" or "OFF".
background Music Setting:
While the slide show is in progress, MP3 files and folders under the same directory are displayed.
Select a folder using the ▲ or ▼ button and press the ENTER button....