Samsung LN-T4669F Tft-lcd Television Owners Instructions

English - 
Connecting a DVD Player or Cable box/Satellite receiver (Set-Top box) via Component cables
The rear panel jacks on your TV make it easy to connect a DVD Player or Cable Box/Satellite receiver (Set-Top Box) to your TV.
1.	 Connect a Component   
   Cable between the     COMPONENT IN (1 or 2)     [Y, PB, PR] jacks on the TV      and the COMPONENT     [Y, PB, PR]  jacks on the        DVD Player or Cable Box/Satellite receiver (Set-Top 
Box).
2.	 Connect Audio Cables  
   between the...

English - 10
Connecting a VCR
These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the 
instructions on pages 6-7). Skip step 1 if you have not yet connected t\
o an antenna or a cable system. 
1.	 Unplug the cable or antenna   
   from the back of the TV.
2.	Connect the cable or antenna     to the ANT IN terminal on the    back of the VCR.
3.	Connect an RF Cable between      the ANT OUT terminal on the        VCR and the ANT 1 IN (AIR) or...

Connecting an Amplifier/DVD Home Theater
1.	Connect Audio Cables      between the AUDIO OUT       [R-AUDIO-L] jacks on the TV and AUDIO IN [R-AUDIO-L] 
jacks  on the Amplifier/DVD 
Home Theater.
   When an audio amplifier is     connected to the "AUDIO     OUT [R-AUDIO-L]"     jack: Decrease the     volume of the TV and adjust     the volume level with the    Amplifier’s volume control.
Amplifier/DVD Home Theater TV Rear Panel
Audio Cable (Not supplied)
Each Amplifier/DVD Home Theater has a...

English - 12
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently:
1.	Press the  POWER button on the remote control.     The message “Menu language, Shop Mode, Channels and Time will be set.” is     displayed.
   Press the ENTER button, the n “Select the language of the OSD” m enu     is automatically displayed.
2. Press the ▲ or ▼ button to select language, then press the ENTER button.     The message “Select Home Mode when installing this TV at...

English - 1
7.	Press the ▲ or ▼ button to select “On” or “Off”, then press the  ENTER button.    The message “Select the time zone in which you live.” is displayed.
8.	Press the ▲ or ▼ button to highlight the time zone for your local area     Press the ENTER button. If you have received a digital signal, the time will be set    automatically.    If not, see page 48 to set the clock.
9.	The message “Enjoy your watching.” is displayed.     When you have finished, press the ENTER button.
Changing...

English - 14
Adjusting the Volume
Using the Volume buttons
1.	Press the VOL or VOL button to decrease or increase the volume. 
Using the MUTE button
At any time, you can cut off the sound using the MUTE button.
1.	 Press  MUTE  button and the sound cuts off.   
   The word "              " will appear in the lower-left corner of the screen.
2.	To turn mute off, press the  MUTE button again or simply press the      VOL or VOL button.
Viewing the Display
1.	 Press the  INFO button on the remote...

English - 1
Viewing the Menus
1.	With the power on, press the  MENU button.    The main menu appears on the screen. The menu’ s left side has five icons:    Picture, Sound, Channel, Setup, Input.
2.	Use the ▲ or ▼ button to select one of the five icons.      Then press the ENTER
 button to access the icon’s sub-menu.
3.	 Press the 
ExIT button to exit.
The on-screen menus disappear from the screen after about one minute. 
Memorizing the Channels
Your TV can memorize and store all of the available...

English - 16
Storing Channels in Memory (Automatic Method)
1.	 Press the  MENU button to display the menu. 
   Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 
2.	 Press the ▲ or ▼ button to select "Auto Program", then press the  ENTER
 button.
3.	 Press the ▲ or ▼ button to select the antenna connection, then press the   
   ENTER button.
    Air: “Air” antenna signal.  
Cable: “Cable” antenna signal.   
Air+Cable: “Air” and “Cable” antenna signals.
4.	 When selecting...

English - 17
After the television has been set up properly, your remote control can operate in five different modes: TV, DVD, Cable, Set-Top box, VCR. Pressing the corresponding  
button on the remote control allows you to switch between these modes and control   
whichever piece of equipment you choose.
The remote control might not be compatible with all DVD Players, VCRs, Cable boxes and Set-Top Boxes.
Setting Up the Remote to Operate Your VCR
1.
    Turn off your VCR.   
2. Press the VCR button on...

English - 18
Setting Up the Remote to Operate Your DVD
1.
   Turn off your DVD.
2. Press the DVD button on your TV’s remote control.
. Press the SET button on your TV’s remote control.
4.
    Using the number buttons on your remote control, enter three digits of the DVD code listed on page 20~21 of this manual for your brand of DVD.   
Make sure you enter three digits of the code, even if the first digit is a “0”.  
(If there is more than one code listed, try the first one.)
.    Press the...