Samsung LN-S2641D TFT-LCD Television User Manual

English-9
Connecting a VCR
These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on
pages 7-8). Skip step 1 if you have not yet connected to an antenna or a cable system. 
1.Unplug the cable or antenna
from the back of the TV.
2.Connect the cable or antenna
to the ANT IN terminal on the
back of the VCR.
3.Connect an RF Cable
between the ANT OUT
terminal on the VCR and the
ANT 1 IN (AIR)  or ANT 2 IN
(CABLE) terminal on the TV....

English-10
Connecting a DVD Player/Set-Top Box via DVI
This connection can only be made if there is a DVI Output connector on the external device.
1.Connect a DVI to HDMI
Cable or DVI-HDMI Adapter
between the HDMI/DVI IN 1
or HDMI/DVI IN 2 connector
on the TV and the DVI 
connector on the 
DVD player/Set-Top Box.
2.Connect Audio Cables
between the DVI IN 
[R-AUDIO-L] jack on the 
TV and the AUDIO OUT
jacks on the DVD player/
Set-Top Box.
DVD Player / Set-Top Box
TV Rear Panel
Audio Cable (Not supplied)...

English-11
Connecting a DVD Player/Set-Top Box via HDMI
This connection can only be made if there is an HDMI Output connector on the external device.
1.Connect an HDMI Cable
between the HDMI/DVI 1 
or HDMI/DVI 2 connector 
on the TV and the HDMI
connector on the 
DVD player/Set-Top Box.DVD Player Rear Panel
TV Rear Panel
HDMI Cable (Not supplied)
What is HDMI?  
• HDMI, or high-definition multimedia interface, is a next-generation interface that enables the 
transmission of digital audio and video...

English-12
Connecting a PC
1.Connect a D-Sub Cable
between PC IN [PC] 
connector on the TV and
the PC output connector 
on your computer. 
2.Connect a PC Audio Cable
between PC IN [AUDIO]
jack on the TV and the
Audio Out jack of the sound
card on your computer.
PCTV Rear Panel
D-Sub Cable (Not supplied)PC Audio Cable (Not supplied)
Each external input source device has a different back panel configuration.
When connecting an external device, match the color of the connection terminal to the cable.
The...

English-13
Turning the TV On and Off
Press the POWERbutton on the remote control.
You can also use the POWERbutton on the front of the panel.
Plug & Play Feature
When the TV is initially powered on, two basic customer settings proceed automatically and subsequently:
1.Press the POWERbutton on the remote control.
The message “Menu language, Channels and Time will be set.” is displayed. 
Press the 
ENTERbutton, then “Select the language of the OSD” menu is 
automatically displayed.
2.Press the ENTERbutton...

English-14
6.Press the ENTERbutton. 
Press the or buttons to select “Yes” or “No”, then the ENTERbutton. 
“Select the time zone in which you live” menu is automatically displayed.
7.Press the or buttons to highlight the time zone for your local area (and to 
move the highlight to the appropriate time zone on the map of the United States).
Press the 
ENTERbutton. If you have received a digital signal, the time will 
be set automatically. 
If not, see page 40 to set the clock.
8.The message “Enjoy your...

English-15
Viewing the Menus
1.With the power on, press the MENU button.
The main menu appears on the screen. Its left side has five icons: 
Input, Picture, Sound, Channel, Setup.
2.Use the  or buttons to select one of the five icons. 
Then press the ENTERbutton to access the icon’s sub-menu.
3.Press the EXIT button to exit.
The on-screen menus disappear from the screen after about two minutes.
Viewing the Display
1.Press the INFO button on the remote control.
The TV will display the channel, the type...

English-16
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. 
After the available channels are memorized, use the CHorCHbuttons to scan through the channels. 
This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels:  
selecting a broadcast source, memorizing the channels (automatic).
Selecting the Video Signal-source
Before your television can begin...

English-17
Setting Up the Remote to Operate Your VCR
1.Turn off your VCR.
2.Press the VCR button on your TV’s remote control.
3.Press the SETbutton on your TV’s remote control.
4.Using the number buttons on your remote control, enter three digits of the VCR code listed on
page 19 of this manual for your brand of VCR. Make sure you enter three digits of the code,
even if the first digit is a “0”. (If more than one code is listed, try the first one.)
5.Press the POWERbutton on the remote control. Your VCR...

English-18
Setting Up the Remote to Operate Your DVD
1.Turn off your DVD.
2.Press the DVD button on your TV’s remote control.
3.Press the SETbutton on your TV’s remote control.
4.Using the number buttons on your remote control, enter three digits of the DVD code listed on
page 20~21 of this manual for your brand of DVD. Make sure you enter three digits of the code,
even if the first digit is a “0”. (If more than one code is listed, try the first one.)
5.Press the POWERbutton on the remote control. 
Your...