Samsung LED TV F7100 User Manual
Have a look at the manual Samsung LED TV F7100 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
84 Basic Sound Settings Screen Menu > Sound Sound Sound Mode Standard Sound Effect 3D Audio Low Speaker Settings Digital Audio Out Reset Sound "The displayed image may differ depending on the model. Use the Sound Settings to change the sound mode, enable/disable surround sound, adjust the equalizer, and optimize the TV's sound. Changing the Sound Mode Screen Menu > Sound > Sound Mode Try Now Sound modes make adjustments to the sound output. However, Sound Modes are not available when using external speakers only. ●Standard: This is the normal sound mode. ●Music : This mode emphasizes normal music instead of voices. ●Movie: This mode is calibrated to provide the best sound for movies. ●Clear Voice: This mode emphasizes voices. ●Amplify : This increases the overall intensity of high-frequency sounds for a better listening experience. It is designed for hearing-impaired listeners. ●Stadium : This is chosen automatically when Sports Mode is turned on under the Smart Features menu. This function is not available on U.S.A. and Canada.
8485 Adjusting the Sound Settings Screen Menu > Sound > Sound Effect Try Now Use sound effects to alter how the TV projects sound. These options are available only when Speaker Select is set to TV Speaker and Sound Mode is set to Standard. ●DTS TruSurround: Produces sound that will make you feel like you are sitting in a movie theater or concert hall. Try Now ● DTS TruDialog : Increases the voice intensity to make dialog clearer. Try Now ● Equalizer : Adjusts the speaker balance and makes bandwidth adjustments. Select Reset to reset the settings. Try Now Auto Volume Screen Menu > Sound > Speaker Settings > Auto Volume Try Now Because each station has its own set of broadcasting conditions, the volume may fluctuate as the channel changes. The Auto Volume function automatically adjusts the volume of a channel by lowering or raising the sound output. Normal applies a normal level of volume adjustment, whereas Night applies a slightly lower volume level than Normal and is ideal for nighttime TV viewing. To use the volume control of a connected source device, deactivate the Auto Volume function. When using the Auto Volume function with a source device, the device’s volume control may not function properly. TV Installation Type Screen Menu > Sound > Speaker Settings > TV Installation Type Try Now Select the TV's installation type. Choose between Wall Mount and Stand to optimize the TV's sound automatically. Resetting the Sound Screen Menu > Sound > Reset Sound Try Now This resets all sound settings to the factory defaults.
86 3D Audio Screen Menu > Sound > 3D Audio Sound Sound Mode Standard Sound Effect 3D Audio Low Speaker Settings Digital Audio Out Reset Sound "The displayed image may differ depending on the model. This function is only available with the PDP 5500 series and LED 6400 series and higher. 3D audio technology provides immersive sound that matches the pop-up effect of 3D video by using perspective in the audio depth control. 3D Audio is only available while viewing 3D content.
8687 Speaker Settings Sound Sound Mode Standard Sound Effect 3D Audio Low Speaker Settings Digital Audio Out Reset Sound "The displayed image may differ depending on the model. If the TV's audio is sent to an external device such as a home theater system, you can designate which speakers to use and make adjustments to eliminate decoding speed echoes. Speaker Select Screen Menu > Sound > Speaker Settings > Speaker Select Try Now You can choose which speakers to use from among available several speakers. Choose one from the list of speakers. To use both the TV speakers and the AV receiver speakers simultaneously, set this option to TV Speaker. If there is a delay between the two sounds, choose any other than TV Speaker to mute the TV speakers. " Using the external speakers only disables the volume button and the mute function. In addition, certain Sound options will be disabled.
88 Digital Audio Output Screen Menu > Sound > Digital Audio Out Try Now This TV is SPDIF-enabled. The Sony Philips Digital Interface (SPDIF) provides digital audio output to speakers and various digital devices, including A/V Receivers and home theaters. This feature reduces interference and distortion. ●Audio Format: Selects the Digital Audio output (SPDIF) format. The available Digital Audio output (SPDIF) formats may vary depending on the input source. Try Now ● Audio Delay : This setting helps correct timing mismatches between the audio and video tracks when watching TV and listening to audio through a digital audio device. Enabling the feature displays a slide bar that you can use to adjust the delay by up to 250ms. Try Now Samsung Audio Device Connection Screen Menu > Sound > Speaker Settings > SoundShare Settings This function is available only with PDP 5500 series and LED 6400 series or higher. Connect the TV to a Samsung audio device for a richer, clearer sound. This function is available for Samsung Audio Device supported the SoundShare function. Pair the Samsung audio device using the TV's Bluetooth function. Refer to the Samsung audio device's operating manual for more information on pairing. ●Add New Device Enables/disables SoundShare. Connection signals from new devices are ignored if they are set to Off. ●Samsung Audio Device List Displays a list of paired Samsung audio devices. Select a device to display its menu options. Activate/deactivate the audio device or remove it from the list. " When using a Bluetooth audio device, a slight mismatch between the audio and video may occur, depending on the content.
8889 Clock and Timer System Setup Menu Language English Time Device Manager Eco Solution Auto Protection Time 2 hours Change PIN "The displayed image may differ depending on the model. Use the clock and timer to make scheduled use of the TV easier and more efficient. Once the clock has been set, you can select the virtual remote panel's or the regular remote's INFO button to check the current time. The clock must be reset every time the power is disconnected. Setting the Time Screen Menu > System > Time > Clock Try Now Set the clock manually or automatically.
90 Auto Automatically download the correct time from a digital channel. To enable this option, an antenna cable has to be connected to the TV. The accuracy of the time information received may vary depending on the channel and signal. Set Clock Mode to Auto. " Time Zone and DST may not be supported depending on the country. ● DST: Set the DST (Daylight Savings Time). ●Time Zone: Choose your time zone. Time Offset Screen Menu > System > Time > Clock > Time Offset Try Now If the set time is not accurate, users can set the time offset to adjust the time difference hourly from -12 to +12 hour. Changing Time Offset is only available, when the Time is set to auto, and is set through a network. The current time will be set through a network, if the TV fails to receive the time information including the broadcast signal from TV stations. (ex: Watching TV via set-top box, Satellite receiver, or etc) Manual Manually enter the time. Set Clock Mode to Manual and then select Clock Set to enter the current time and date. Sleep Timer Screen Menu > System > Time > Sleep Timer Try Now This function automatically shuts off the TV after a preconfigured period of time. You can set the timer up to 180 minutes in 30 minute increments.
9091 On Timer Screen Menu > System > Time > On Timer Try Now Set the On Timer so that the TV turns on automatically at a chosen time. Only three On Timer settings can run concurrently. The clock must be set for the On Timer to work. ●Setup : Specify the dates and duration. Use Manual to specify the days of the week. ●Time: Specifies the on time. ●Volume: Specifies the volume when the TV turns on. ●Source : Selects a signal source from the list. Specify a channel or source to be displayed when the TV turns on. To specify a USB device, a USB device must first be connected to the TV. To playback media from an HDMI or Component source such as a DVD player or Blu-ray player, the device must already be turned on and playing the media when the TV is turned on. ●Antenna : Set Source to TV to select a broadcast signal. ●Channel: Set Source to TV to select a channel. ●Music / Photo: Set Source to USB to specify a USB device folder containing music and image files. Selecting both music and image files plays the music files and displays the images at the same time. " This feature will not function properly if the selected USB device does not contain media files or a folder has not been specified. "The slideshow will not start if there is only one image file on the USB device. "Folders with long names cannot be selected. "Always use different folder names for multiple USB devices. "Use a USB memory stick or multi-card reader. On Timer may not work with certain battery-powered USB devices, MP3 players, or PMPs because the TV may take too long to recognize the device. Off Timer Screen Menu > System > Time > Off Timer Try Now Set the Off Timer to turn the TV off automatically at a specific time. Only three Off Timer settings can be entered concurrently. The clock must be set for the Off Timer to work. ●Setup : Specifies the date or period to run the function. Use Manual to specify the days of the week. ●Time: Sets the time for the TV to automatically turn off.
92 Screen Protection and Maintenance System Setup Menu Language English Time Device Manager Eco Solution Auto Protection Time 2 hours Change PIN "The displayed image may differ depending on the model. Several onboard functions exist that help maintain the TV beyond its useful lifespan and decrease power consumption. Eco Solution Screen Menu > System > Eco Solution Try Now Eco Solution adjusts the TV's brightness level and prevents overheating to reduce overall power consumption. ●Energy Saving Select a brightness setting from the list to reduce the TV's power consumption. Try Now ● Eco Sensor Automatically adjusts the TV's brightness level based on the ambient light level to reduce the TV's power consumption. If the Eco Sensor has adjusted the screen's brightness level, you can manually adjust the screen's minimum brightness level by adjusting Min. Backlight or Min Cell Light (applicable models). If Eco Sensor is enabled and the Picture menu's Backlight or Cell Light (applicable models) value is changed, Eco Sensor is automatically disabled. This function is not available LED 4300 series. ●No Signal Power Off Select a time from the list. If no signal is received for the specified duration, the TV will automatically cut off the power to reduce power consumption. Try Now ● Auto Power Off If the TV remains turned on for four hours without any user input, the TV will automatically turn off to prevent overheating. Try Now
9293 Screen Burn Protection Screen Menu > System > Screen Burn Protection This feature is only available for PDP TVs. To reduce the possibility of screen burn, the TV uses Pixel Shift screen burn prevention technology. Pixel Shift moves the picture slightly on the screen to avoid over-using some elements and under- using others. The Pixel Shift Time setting allows users to program the time between picture movements, in minutes. The TV also has the following additional screen burn protection functions: ●Pixel Shift ●Auto Protection Time ●Scrolling ●Side Gray Pixel Shift Screen Menu > System > Screen Burn Protection > Pixel Shift Set the TV to very slightly shift pixels on the PDP screen in a horizontal or vertical direction to minimize burned-in after-images. The Pixel Shift value may differ depending on the monitor size and mode. It is not available in Screen Fit mode. Settings: ●Horizontal : Available Settings: 0 – 4 (pixels), Optimum settings for TV/AV/Component/HDMI: 4 ●Vertical : Available Settings: 0 – 4 (pixels), Optimum settings for TV/AV/Component/HDMI: 4 ●Time (minutes): 1 – 4 min, Optimum settings for TV/AV/Component/HDMI: 4 min Auto Protection Time Screen Menu > System > Screen Burn Protection > Auto Protection Time If the screen displays a still image for a certain period of, the TV activates the screen saver to prevent the formation of burnt-in ghost images.