Samsung LE 37B651 User Manual

							
1
English
Using the Menus

If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength. Continue to adjust the antenna until you find the best position with the strongest signal.
■
TV Side Panel
or
USB Drive
Current Version 2009/01/17_000001
By USB    ▶
By Channel
Standby Mode Upgrade  : 45 Min 
Alternative Software  2009/01/16_000000
U Move     E Enter     R Return
Software Upgrade
Support
OptionDescription
Self DiagnosisSignal Information (digital channels only)Unlike analogue channels, which can vary in reception quality from ‘snowy’ to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analogue channels, you cannot fine tune a digital channel. You can, however, adjust your antenna to improve the reception of available digital channels.
■
Software UpgradeSamsung may offer upgrades for the TV’s firmware in the future. These upgrades can be performed via the TV when it is connected to the Internet, or by downloading the new firmware from samsung.com to a USB memory device.Current Version is the software already installed in the TV.Alternative Software (Backup) shows the previous version that will be replaced.Software is represented as ‘Year/Month/Day_Version’. The more recent the date, the newer the software version. Installing the latest version is recommended.By USBInsert a USB drive containing the firmware upgrade downloaded from samsung.com into the TV. Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied. The TV will turn off and turn on automatically after completing the firmware upgrade. Please check the firmware version after the upgrades are complete (the new version will have a higher number than the older version). When software is upgraded, video and audio settings you have made will return to their default (factory) settings. We recommend you write down your settings so that you can easily reset
them after the upgrade.By Channel
Upgrades the software using the broadcasting signal.
If the function is selected during the software transmission period, this function searches for available software and downloads the software.
The time required to download the software is determined by the signal status.Standby Mode Upgrade
To continue software upgrade with master power on, Select On by pressing the ▲ or ▼ button. 45 minutes after entering standby mode, a manual upgrade is automatically conducted. Since the power of the unit is turned on internally, the screen may be on slightly for the LCD product. This phenomenon may continue for more than 1 hour until the software upgrade is completed.Alternative Software (Backup)
If there is an issue with the new firmware and it is affecting operation, you can change the software to the previous version.
If software was changed, existing software is displayed.
You can change current software to alternative software by ‘Alternative Software’.
•
•
•
■
■
•
•
■
■
•
•
HD Connection GuideThis menu presents the connection method that provides the optimal quality for the HD TV. Refer to this information when connecting external devices to the TV.
Contact SamsungView this information when your TV does not work properly or when you want to upgrade the software. You can view the information regarding the call centre, product and software file download method.

BN68-01900M-01Eng.indb   412009-04-13   �� 10:07:25 
						

							

English
Media Play - USB Device

Connecting a USB Device
1 Press the POWER button to turn the TV on.          
2 Connect a USB device containing photo, music and/or movie files to the USB1(HDD) or USB2 jack on the side of the TV.   
3 When the Application selection screen is displayed, press the ENTERE button to select Media Play (USB & DLNA).
Using the Remote Control Button in Media Play Menu
ButtonOperations
▲/▼/◄/►Move the cursor and select an item.
ENTERE
Select the currently selected item. While playing a slide show, movie, or music file:
- Pressing the ENTERE button during play pauses the play.
- Pressing the ENTERE button during pause resumes the play.
∂/∑Play or pause the Slide Show, music or movie.
RETURNReturn to the previous menu.
TOOLSRun various functions from the Photo, Music and Movie menus.
∫Stop the current slide show, Music or Movie file.
π/μJump to previous group/Jump to next group.
INFOShow file information.
MEDIA.PExit Media Play mode.
< P >, EXIT, TVStop Media Play mode and Returns to TV mode.
MTP (Media Transfer Protocol) is not supported.The file system supports FAT16, FAT32 and NTFS.Certain types of USB Digital camera and audio devices may not be compatible with this TV.Media Play only supports USB Mass Storage Class devices (MSC). MSC is a Mass Storage Class Bulk-Only Transport device. Examples of MSC are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not supported.).Please connect directly to the USB port of your TV. If you are using a separate cable connection, there may be a USB compatibility problem.Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss.Connect a USB HDD to the dedicated port, USB1 (HDD) port. However, if the connected device requires high power, the USB1 (HDD) may fail to support the device.Do not disconnect the USB device while it is loading.MSC supports MP3 and JPEG files, while a PTP device supports JPEG files only.The sequential JPEG format is supported.The higher the resolution of the image, the longer it takes to display on the screen.The maximum supported JPEG resolution is 15360X8640 pixels.For unsupported or corrupted files, the ‘Not Supported File Format’ message is displayed.If sort key is set to Basic View, up to 1000 files can be displayed in each folder. The other sort key can display up to 10000 files.MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management (DRM) is a technology that supports the creation of content, the distribution and management of the content in an integrated and comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the illegal copying of contents, as well as managing billings and settlements.When moving to a photo, loading may take a few seconds. At this point, the loading icon will appear at the screen.If more than 2 PTP devices are connected, you can only use one at a time.If more than one MSC device is connected, some of them may not be recognized.  If a device requires high power (more than 500mA or 5V), the USB device may not be supported.If an over-power (Fail add new device USB1/USB2 Power Overload) warning message is displayed while you are connecting or using a USB device, the device may not be recognized or may malfunction.
■■■■
■
■
■
■■■■■■■■
■■■
■
Media Play - USB Device
TV Side Panel
or
USB Drive
851.86MB/993.02MB Free
Photo
SUM
SUM  Device
PHOTO
e ExitMusicMovieSetup

BN68-01900M-01Eng.indb   422009-04-13   �� 10:07:25 
						

							

English
Media Play - USB Device

Media Play Function
This function enables you to view and listen to photo, music and/or movi\
e files saved on a USB Mass Storage Class (MSC) device.
It might not work properly with unlicensed multimedia files.
Entering the Media Play (USB & DLNA) Menu
1 Press the MENU button. Press the ▲ or ▼ button to select Application, then press the ENTERE button.
2 Press the ▲ or ▼ button to select Media Play (USB & DLNA), then press the ENTERE button.The Media Play (USB & DLNA) menu is displayed.
3 Press the Red button, then press the ▲ or ▼ button to select the USB Memory. Press the ENTERE button.This function differs depending on the USB Memory Device / DLNA device.The selected USB device name appears at the bottom left of the screen.
4 Press the ◄ or ► button to select an icon (Photo, Music, Movie, Setup), then press the ENTERE button. To exit Media Play mode, press the MEDIA.P button on the remote control.
Removing a USB Memory Device Safely
You can remove the device safely from the TV.
1 Press the TOOLS button in the Media Play file list screen, or while a Slide Show, music or movie is being played.
2 Press the ▲ or ▼ button to select Remove Safely, then press the ENTERE 
button. 
3  Remove the USB device from the TV.
Screen Display
Move to either ‘Sort key List Section’, ‘Group List Section’\
 or ‘File List Section’ using the Up and Down buttons. After selecting a section, press the ◄ or ► buttons to select an item.
■
■
■■
■
Press the MEDIA.P button on the remote control to display the Media Play menu.Press the SOURCE button on the remote control to view the source list. Then Press the ▲ or ▼ button to select USB.
■
■
851.86MB/993.02MB Free
Photo
SUM
SUM  Device
PHOTO
R ReturnMusicMovieSetup
SUM  Device Favourites Settings    Select   T Tools  R Return
PreferenceBasic ViewTimelineFolderColour
1234.jpg1235.jpg1236.jpg1237.jpg1233.jpg1232.jpg1231.jpg
Slide ShowPlay Current GroupInformationRemove Safely
5/15
SUM  Device Favourites Settings    Select   T Tools  R Return
PreferenceBasic ViewTimelineFolderColour
1234.jpg1235.jpg1236.jpg1237.jpg1233.jpg1232.jpg1231.jpg
5/15
1File(s) Selected
1
2
3
45
6
Sort key List Section
Group List Section
File List Section
c

BN68-01900M-01Eng.indb   432009-04-13   �� 10:07:28 
						

							

English
Media Play - USB Device

Sorting the Photo List
You can sort photos in the Photo List by a particular standard.
1 Press the MEDIA.P button.           
2 Press the ◄ or ► button to select Photo, then press the ENTERE button.    
3 Press the ▲ button to move to the Sort key Section.       
4 Press the ◄ or ► button to select a sorting standard. (Basic View, Timeline, Colour, Folder, Preference)The photos are sorted according to the newly selected sorting standard.
5 Press the ▼ button to move to the File List Section. Press the ∂ (Play)/ENTERE button to start the Slide Show in the order you selected.To move to the previous/next group, press the π (REW) or μ (FF) button.Photo information is automatically set. The colour information extracted from a photo file may be different from your expectations. You can change the colour and preference.PTP does not support folder sort mode.
OptionDescription
Basic ViewShows the folders on the USB memory device.  If you select a folder and press the ENTERE button, only the photo files contained in the selected folder are displayed.When sorted according to the Basic View, you cannot set Favourites files.■
TimelineIt sorts and shows photos by date.  It sorts by year and month from the earliest photo.
ColourSorts photos by colour. You can change the photo colour information.You should set the Use Colour View to on in the Setup menu before sorting photos by colour.■
FolderIt Sorts photos by folder. If there are many folders in USB, the photos files are shown in order in each folder.  The photo file in the Root folder is shown first and the others are shown in alphabetical order by name.
PreferenceIt Sorts photos by preference (Favourites).  You can change the photo preferences.Changing the Favourites Settings.  Select the desired photo in the Photo list, then press the Green button repeatedly until the desired setting appears.Up to 3 stars can be selected.The stars are for grouping purposes only.  For example, the 3 star setting does not have any priority over the one star setting.
■
■■
■
■
■
■
1 Current Sort key: This field shows the current standard for sorting files.  Press the ◄ or ► button to change the standard for sorting files.2 View Groups: Shows the detailed groups of the files sorted according the \
selected Sort key. The sort group where the currently selected file is contained is highlighted.3 Currently selected file: The selected file is the file you can now control.  Photo and movie files are displayed as thumbnail images.4 Current Device: Shows the currently selected device name.  Press the Red button to select a device.Red (Device) button: Selects a connected device.
5	Help ItemsGreen (Favourites Settings) button: Changes the Favourites Settings for the selected file. Press this button repeatedly until the desired va\
lue appears.Yellow (Select) button: Selects file from the file list.  Selected files are marked with a symbol c.  Press the Yellow button again to cancel a file selection.TOOLS (Tools) button: Displays the option menus.  (The option menu changes according to the current status.)
6	Item Selection Information: Shows the number of files that are selected \
by 
pressing the Yellow button. 
■
■
■
■
SUM  Device Favourites Settings    Select   T Tools  R Return
PreferenceBasic ViewTimelineFolderColour
1234.jpg1235.jpg1236.jpg1237.jpg1233.jpg1232.jpg1231.jpg
5/15

BN68-01900M-01Eng.indb   442009-04-13   �� 10:07:29 
						

							

English
Media Play - USB Device

Photo List Option Menu
1 Press the MEDIA.P button.           
2 Press the ◄ or ► button to select Photo, then press the ENTERE button.     
3 Press the ◄ or ► button to select the desired photo file.Selecting Multiple Photos
Press the ◄ or ► button to select the desired photo file.  Then press the Yellow button.
Repeat the above operation to select multiple photo files.
The mark c appears to the selected photo file.
4 Press the TOOLS button.The option menu changes according to the current status.
OptionDescription
Slide ShowUsing this menu, you can play a Slideshow using the photo files on the USB memory device.
Play Current GroupUsing this menu, you can play a Slideshow using only the photo files in the currently selected sorting group.
Change Group Info (When the Sort key is the Colour)
You can change a selected photo file’s (or group of files) colour information in order to move it from one colour group to another.This does not change the actual colour of the photo.The group information of the current file is updated and the photos are moved to the new colour group.To change the information of multiple files, select the files you want by pressing the Yellow button.
■■
■
Deselect All  (When at least one file is selected)
You can deselect all files.The c mark indicating the corresponding file is selected is hidden.■
InformationThe photo file information including the name, the size, the resolution, the date modified and the path is displayed.You can view the information of photo files during a Slideshow using the same procedures.■
Remove SafelyYou can remove the device safely from the TV.
■
•
•
•
■
Press the INFO button to viewing the information. ■
SUM  Device Favourites Settings    Select   T Tools  R Return
ColourFolderPreferenceTimelineBasic View
1234.jpg1235.jpg1236.jpg1237.jpg1233.jpg1232.jpg1231.jpg
Slide ShowPlay Current GroupChange Group InfoInformation▼
5/15

BN68-01900M-01Eng.indb   452009-04-13   �� 10:07:31 
						

							

English
Media Play - USB Device

Viewing a Photo or Slide Show
Viewing a Slide Show
1 Press the ▼ button to select the File List Section.       
2 Press the TOOLS button.           
3 Press the ▲ or ▼ button to select Slide Show, then press the ENTERE button.All files in the File List Section will be used for the Slide Show.During the slide show, files are displayed in order from the currently shown file.The Slide Show progresses in the order sorted in the File List Section.Music files can be automatically played during the Slide Show if the Background Music is set to On.While a photo list is displayed, press the ∂(Play)/ENTERE button on the remote control to start slide show.
Slideshow Control Buttons
ButtonOperations
ENTEREPlay/Pause the Slide Show.
∂Play the Slide Show.
∑Pause the Slide Show.
∫Exit Slide Show and return to the photo list.
π/μChange the Slideshow playing speed.
TOOLSRun various functions from the Photo menus.
Playing Current Group
1 Press the ▲ button to move to the Sort key Section.       
2 Press the ◄ or ► button to select a sorting standard.        
3 Press the ▼ button to move to the Group List Section.       
4 Select a group using the ◄ and ► buttons.         
5 Press the ∂ (Play) button. A slideshow begins with the files of the selected group.
Alternatively 
1 Select a Sort key and then in the File List Section, select the photos c\
ontained in the desired group.To move to the previous/next group, press the π (REW) or μ (FF) button.
2 Press the TOOLS button.            
3 Press the ▲ or ▼ button to select Play Current group, then press the ENTERE button.Only the photos in the sorting group including the selected files will b\
e used for the Slide Show.
To perform a Slide Show with only the selected Files
1 Press the ▼ button to select the File List Section.       
2 Press the ◄ or ► button to select the desired photo in the File List Sectiont.    
3 Press the Yellow button.           
4 Repeat the above operation to select multiple photos.The c mark appears to the left of the selected photo.If you select one file, the Slide Show will not be performed.To deselect all selected files, press the TOOLS button and select Deselect All.
5 Press the ∂ (Play)/ENTERE button.The selected files will be used for the Slide Show.
■■
■■
■
■
■
■■■
■
SUM  Device Favourites Settings    Select   T Tools  R Return
Basic ViewTimelineFolderColour
1234.jpg1235.jpg1236.jpg1237.jpg1233.jpg1232.jpg1231.jpg
Slide ShowPlay Current GroupInformationRemove Safely
5/15
Preference
E Pause      ◀▶ Previous / Next     T Tools     R ReturnSUM
1234.jpg                          580x765       2009/12/02       5/15▶  Normal
SUM  Device Favourites Settings    Select   T Tools  R Return
Basic ViewTimelineFolderColour
1234.jpg1235.jpg1236.jpg1237.jpg1233.jpg1232.jpg1231.jpg
5/15
Preference

BN68-01900M-01Eng.indb   462009-04-13   �� 10:07:34 
						

							

English
Media Play - USB Device

Alternatively 
1 In the File List Section, press the Yellow buttons to select the desired photos.    
2 Press the TOOLS button.            
3 Press the ▲ or ▼ button to select Slide Show, then press the ENTERE button.The selected files will be used for the Slide Show.
Slide Show Option Menu
1 During a slide show (or when viewing a photo), press the TOOLS button to set the option.
2 Press the ▲ or ▼ button to select the desired option, then press the ENTERE button.
OptionDescription
Stop Slide Show /  Start Slide Show
You can start or stop a Slideshow.
Slide Show SpeedYou can select the slide show speed.This function is available only during a slide show.You can also change the speed of the Slide Show by pressing the π (REW) or μ (FF) button during the Slide Show.
■■
Slide Show EffectYou can select the screen transition effect used in the slideshow.None / Fade1 / Fade2 / Blind / Spiral / Checker / Linear / Stairs / Wipe / Random This function is available only during a slide show.
■
RotateYou can rotate photos saved on a USB memory device.Whenever you press the ◄ button, it rotates by 270˚, 180˚, 90˚, and 0˚.Whenever you press the ► button, it rotates by 90˚, 180˚, 270˚, and 0˚. The rotated file is not saved.
■
■
■
ZoomYou can magnify photos saved on a USB memory device. (x1 → x2 → x4)To move the enlarged photo image, press the ENTERE button, then press the ▲/▼/◄/► buttons. Note that when the enlarged picture is smaller than the original screen size, the location change function doesn’t work.The enlarged file is not saved.
■
■
Background MusicYou can select background music when watching a Slide Show.Background Music
Off: Background music is not played.
On: When the background music is available, if you select On, the music is played back. BGM Mode
You can select a mode to use for the background music.BGM Mood
Music with the mood you selected is set as the background music.
If you set BGM Mode to Mood, you can select a mood.Select Music File (0 File(s) Selected)
Only the selected music file is set as the background music.
If you set BGM Mode to Selected File, you can select a music file.
■
•
•
■
■
■
Picture Setting /  Sound Setting
You can select the picture and sound settings.
InformationThe photo file information is displayed.
Remove SafelyYou can remove the device safely from the TV.
■
To use this feature, there must be music and photo files stored on the USB device.Loading music files is needed to change BGM mode. Play music files in music category to load.
■
■
Stop Slide Show
Slide Show Speed  : Normal
Slide Show Effect  : Fade1
RotateZoomBackground MusicPicture SettingSound SettingInformation
  ▼
U Move     E Enter     e Exit
Tools

BN68-01900M-01Eng.indb   472009-04-13   �� 10:07:35 
						

							

English
Media Play - USB Device

Sorting the Music List
You can sort music files in the Music List by a particular standard.
1 Press the MEDIA.P button.           
2 Press the ◄ or ► button to select Music, then press the ENTERE button.   
3 Press the ▲ button to move to the Sort key Section.        
4 Press the ◄ or ► button to select a sorting standard. (Basic View, Title, Artist, Mood, Genre, Folder, Preference)The Music files are sorted according to the newly selected sorting stand\
ard.
5 Press the ▼ button to move to the File List Section. Press the ENTERE button to start playing music in the order selected by the user.To move to the previous/next group, press the π (REW) or μ (FF) button.Music information is automatically set. The mood information extracted from a music file may differ from the expectations of the user. You can change the mood and preference.
OptionDescription
Basic ViewShows the folders of the USB memory device.  If you select a folder and press the ENTERE button, only the music files contained in the selected folder are displayed.When sorted according to the Basic View, you cannot set Favourites files.■
TitleSorts the music titles in symbol/number/alphabet/special order, and shows the music file.
ArtistSorts the music file by artist in symbol/number/alphabet/special order.
MoodSorts music files by the mood. You can change the music mood information.
GenreSorts music files by the genre.
FolderSorts music files by the folder. If there are many folders in USB, the files are shown in order in each folder.  The music file in the Root folder is shown first and the others are shown in alphabetical order by name.
PreferenceSorts music files by preference (Favourites).  You can change the music files preferences.Changing the Favourites Setting Select the desired music file in the Music list, then press the Green button repeatedly until the desired setting appears.Up to 3 stars can be selected.The stars are for grouping purposes only.  For example, the 3 star setting does not have any priority over the one star setting.
■
■■
Music List Option Menu
1 Press the MEDIA.P button.           
2 Press the ◄ or ► button to select Music, then press the ENTERE button.     
3 Press the ◄ or ► button to select the desired Music file. Selecting Multiple Music Files
Press the ◄ or ► button to select the desired music file. Then press the Yellow button.
Repeat the above operation to select multiple music files.
The mark c appears to the selected music file.
4 Press the TOOLS button.The option menu changes according to the current status.
■
■
■
■
•
•
•
■
If there is no title information for a music file, the filename is displayed.If no information is available for the Artist, Album, Year, or Genre the corresponding item is displayed as blank.
■
■
SUM  Device Favourites Settings    Select   T Tools  R Return
PreferenceBasic ViewTitleFolderGenre
I Love YouHaHaHaGoldShineWayWant MeLies
Glen HansOnce Ost2007Soundtrack
3/37Energetic
SUM  Device Favourites Settings    Select   T Tools  R Return
PreferenceBasic ViewTitleFolderGenre
HaHaHaGoldShineWayWant MeLiesI Love You
Glen HansOnce Ost2007Soundtrack
3/37EnergeticPlay Current GroupInformationRemove Safely

BN68-01900M-01Eng.indb   482009-04-13   �� 10:07:36 
						

							

English
Media Play - USB Device

OptionDescription
Play Current GroupUsing this menu, you can only play music files in the currently selected sorting group.
Change Group Info (When the Sort key is Mood)
You can change the mood information of music files.The group information of the current file is updated and the file is moved to the new group.To change the information of multiple files, select files by pressing the Yellow button.■
Deselect All  (When at least one file is selected)
You can deselect all files.The c mark indicating the corresponding file is selected is hidden.■
InformationThe music file information including the name, the size, the date modified and the path is displayed.You can view the music file information during a Play Current Group using the same procedures.■
Remove SafelyYou can remove the device safely from the TV.
Playing a Music
Playing a Music File
1 Press the ▼ button to select the File List Section.       
2 Press the ◄ or ► button to select a music file to be played.      
3 Press the ∂ (Play)/ENTERE button.This menu only shows files with the MP3 file extension. Files with other\
 file extensions are not displayed, even if they are saved on the same US\
B device.The selected file is displayed at the top with its playing time.To adjust the music volume, press the volume button on the remote control\
. To mute the sound, press the MUTE button on the remote control.If the sound is odd when playing MP3 files, adjust the Equalizer and SRS TruSurround HD in the Sound menu. (An over-modulated MP3 file may cause a sound problem.)The playing duration of a music file may be displayed as ‘00:00:00’\
 if its playing time information is not found at the start of the file.π (REW) or μ (FF) buttons do not function during play.
Music Play Control Buttons
ButtonOperations
ENTEREPlay/Pause the music file.
∂Play the music file
∑Pause the music file
∫Exit play mode and return to the music list.TOOLSRun various functions from the Music menus.
Music Function Information Icon
pWhen all music files in the folder (or the selected file) are repeated. Repeat Mode is On.
qWhen all music files in the folder (or the selected file) are played once. Repeat Mode is Off.
■
■■
■
■
■
Press the INFO button to viewing the information. ■
E Pause      ◀▶ Previous / Next     T Tools     R ReturnSUM
 I Love YouHaHaHaWay
▶            00:00:04 / 00:04:04                                       3/37

BN68-01900M-01Eng.indb   492009-04-13   �� 10:07:36 
						

							
0
English
Media Play - USB Device

Playing the Music Group
1 Press the ▲ button to move to the Sort key Section.       
2 Press the ◄ or ► button to select a sorting standard.       
3 Press the ▼ or ENTERE button to move to the Group List Section.   
4 Press the ∂ (Play) button. The files of the selected group will start playing.
Alternatively 
1 Select a sort key and then in the File List Section, select the files co\
ntained in the desired group.To move to the previous/next group, press the π (REW) or μ (FF) button.
2 Press the TOOLS button.            
3 Press the ▲ or ▼ button to select Play Current Group, then press the ENTERE button.The music files in the sorting group including the selected file are pla\
yed.
Playing the selected Music Files
1 Press the ▼ button to select the File List Section.       
2 Press the ◄ or ► button to select the desired music file.       
3 Press the Yellow button.     
4 Repeat the above operation to select multiple music files.The c appears to the left of the selected music file.To deselect all selected files, press the TOOLS button and select  Deselect All.
5 Press the ∂ (Play)/ENTERE button.The selected files will be played.
Music Play Option Menu
OptionDescription
Repeat ModeYou can play music files repeatedly.
Picture Setting /  Sound Setting
You can configure the picture and sound settings.
InformationThe music file information is displayed.
Remove SafelyYou can remove the device safely from the TV.
■
■
■■
■
Repeat Mode  ◀            On             ▶Picture SettingSound SettingInformationRemove Safely
U Move     L Adjust     e Exit
Tools

BN68-01900M-01Eng.indb   502009-04-13   �� 10:07:36