Samsung LE 37B554 User Manual

							41
English
Media Play - USB Device
Using the Option Menu
OptionDescription
Play
Select to play MP3 files.
Repeat MusicSelect to repeatedly play MP3 files in the current folder.You can select �n or�ff. select �n or�ff.ct �n or �ff.■
Delete / Delete All / 
Delete Selected File 
(When multiple files are 
selected)Select the file to delete. (Alternatively, select multiple files 
by pressing the Yellow button.)
You cannot recover a deleted file.
■
Deselect All (When at 
least one file is selected)You can deselect all files.The c mark indicating the corresponding file is 
selected is hidden.■
Music Function Information Icon
When all music files in the folder (or the selected file) are repeated. Repeat Music is On.
When all music files in the folder (or the selected file) are played once. Repeat Music is Off.
 / When pressing the ∂ /∑ button on the remote control while 
music is playing.
When pressing the ∫ button on the remote control when music 
is stopped.
Using the Setup Menu
Setup displays the user settings of the  Media Play menu.
1 Complete Steps 1 to 3 of “Using the Media Play Menu”.(Refer to pa\
ge 38)
2	 Press	the	◄	or	►	button	to	select	Setup, then press the ENTERE button.    
3	 Press	the	▲	or	▼	button	to	select	an	item	you	want,	then	press	the	ENTERE 
button. (Slide Show Speed, Background Music, Background Music Setting, 
Repeat Music, Screen Saver, Remove Safely)
4	 Press	the	▲	or	▼	button	to	select	the	option,	then	press	the	ENTERE button.  
To exit Media Play mode, press the  MEDIA.P button on the remote control.
Option Description
Slide Show Speed
Select to control the slide show speed. You can select 
Fast, Normal or Slow .
Background MusicSelect to determine whether to play an MP3 file during a 
slide show.You can select Music On or Music Off.
Background Music 
SettingWhile a slide show is in progress, use the  Background 
Music Setting  to select a music file to listen to. Select an 
MP3 file as the background music.
Repeat MusicSelect to determine whether to repeat playing the music 
when all MP3 files in the current folder have been played.
Screen SaverSelect to set the waiting time before the screen saver 
appears. The screensaver will appear when no button is 
pressed for 2, 4, 8,10 hours or off.
Remove SafelyYou can remove the device safely from the TV.
Press the ∑ button while playing 
an MP3 file to pause the file.
Press the ∫ button to exit Play 
mode.
This menu only shows files with 
the MP3 file extension. Files 
with other file extensions are not 
displayed,even if they are saved 
on the same USB device.
The selected file is displayed on 
the top with its playing time.
To adjust the music volume, press 
the y button on the remote 
control. To mute the sound, press 
the MUTE button on the remote 
control.
If the sound is odd when playing 
MP3 files, exit Media Play mode 
and adjust the Equalizer and 
SRS TS HD in the Sound menu. 
(An over-modulated MP3 file may 
cause a sound problem.)■
■
■
■
■
■
Slide Show Speed  Normal Background Music On  Background Music Setting Repeat Music   :OffScreen Saver  :4 hoursRemove Safely 
 Move  Enter  Return
SetupFast
Normal Slow
Upper Folder
01-001
02-002
03-003
04-004
05-005
 Select    Move  Enter Return◄◄ 1/1 Page ►►
Background Music Setting
Choose files for background music
BN68-02315G-01Eng.indd   412009-06-08   �� 11:46:02 
						

							
English
Anynet+
Anynet+
Connecting Anynet +
 Devices
What is Anynet +
?
Anynet +
 is a function that enables you to control all connected Samsung devices\
 that support Anynet +
 with your Samsung TV’s remote.
The Anynet +
 system can be used only with Samsung devices that have the Anynet +
 feature. To be sure your Samsung device has this 
feature, check if there is an Anynet +
 logo on it.
To connect to a TV
Connect the HDMI IN (1, 2, 3 (DVI)  or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet +
 device using an HDMI cable.
To connect to Home Theatre
1  Connect the HDMI IN (1, 2, 3(DVI)  or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet +
 device using 
an HDMI cable.
2  Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding Anynet+
 device using an HDMI 
cable. Connect the Optical cable between the  DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input on 
the Home Theatre.
When following the connection above, the Optical jack only outputs 2 cha\
nnel audio. You will only hear sound from the 
Home Theatre’s Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the 
DIGITAL AUDIO OUT (OPTICAL)  jack on the DVD player or Cable / Satellite Box (ie Anynet Device 1 or 2) directly to 
the Amplifier or Home Theatre, not the TV.
Connect only one Home Theatre.
You can connect an Anynet +
 device using the HDMI 1.3 cable. Some HDMI cables may not support Anynet +
 functions.
Anynet +
 works when the AV device supporting Anynet +
 is in the Standby or On status.
Anynet +
 supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
Anynet +
 supports up to 3 devices simultaneously.
■
■
■
■
■
■
■
Anynet+
 Device 1
HDMI 1.3 Cable
HDMI 1.3 Cable
HDMI 1.3 Cable
HDMI 1.3 Cable Anynet
+
 Device 2 Anynet+
 Device 3 Anynet+
 Device 4
TV
Anynet+
 Device 1
HDMI 1.3 Cable
HDMI 1.3 Cable
HDMI 1.3 Cable
HDMI 1.3 Cable
TV
HDMI 1.3 CableOptical Cable
Anynet +
 Device 2 Anynet+
 Device 3 Anynet+
 Device 4
Home Theatre
BN68-02315G-01Eng.indd   422009-06-08   �� 11:00:34 
						

							
English
Anynet+
Setting Up Anynet+
OptionDescription
Setup
Anynet + 
(HDMI-CEC) 
To use the Anynet +
 Function, Anynet +
 (HDMI-CEC) must 
be set to On.
When then thehe Anynet +
 (HDMI-CEC) function is disabled, all 
the Anynet +
 related operations are deactivated.
Auto Turn Off 
Setting an Anynet+ Device to turn Off automatically when 
the TV is turned Off.
The active source on the TV remote must be set 
to TV to use the Anynet +
 function.
If you set  Auto Turn Off to Yes, connected 
external devices are also turned off when the 
TV is turned off. If an external device is still 
recording, it may or may not turn off.
■
■
•
•
Switching between Anynet +
 
Devices
1  Press the TOOLS  button. Press the ENTERE button to select Anynet +
 (HDMI-
CEC).
2  Press the ▲ or ▼ button to select Device List, then press the ENTERE button.
Anynet +
 devices connected to the TV are listed. If you cannot find a device 
you want, press the red button to scan for devices.
3  Press the ▲ or ▼ button to select to a particular device and press the ENTERE 
button. It is switched to the selected device. Only when you set Anynet+ (HDMI-CEC) to On in the Application  menu, the 
Device List menu appears.
Switching to the selected devices may take up to 2 minutes. You cannot 
cancel the operation during the switching operation.
The time required to scan for devices is determined by the number of 
connected devices.
When the device scan is complete, the number of devices found are not 
displayed.
Although the TV automatically searches the device list when the TV is turned 
on via the power button, devices connected to the TV may not always be 
automatically displayed in the device list. Press the Red button to sear\
ch for 
the connected device.
If you have selected external input mode by pressing the  SOURCE button, 
you cannot use the Anynet +
 function. Make sure to switch to an Anynet +
 
device by using the  Device List.
■
■
■
■
■
■
■
U Move       E Enter       R Return
Anynet+ (HDMI-CEC) 
: On                                  ▶
Setup
Auto Turn Off  : Yes
U Move       E Enter       R Return
View TV
Device List
Recording: DVDR
DVDR MENU
DVDR INFO
Receiver: Off
Setup
Press the TOOLS button to 
display the  Tools menu. You 
can also display  Anynet+ menu 
by selecting  Tools → Anynet+ 
(HDMI-CEC).■
U Move       E Enter       R Return
Anynet + (HDMI-CEC) 
: On
Setup
Auto Turn Off  : Yes                               ▶
Anynet+ (HDMI-CEC)
Media Play (USB)
Application
BN68-02315G-01Eng.indd   432009-06-08   �� 11:00:34 
						

							
English
Anynet+
Anynet+
 Menu
The Anynet +
 menu changes depending on the type and status of the Anynet +
 devices 
connected to the TV.
Option Description
View TVAnynet+
 mode changes to TV broadcast mode.
Device List Shows the Anynet+
 device list.
(device_name) 
MENUShows the connected device menus.   
E.g. If a DVD recorder is connected, the disc menu of the 
DVD recorder will appear.
(device_name)  INFO Shows the play menu of the connected device.   
E.g. If a DVD recorder is connected, the play menu of the 
DVD recorder will appear.
Recording: (*recorder) Starts recording immediately using the recorder.  
(This is only available for devices that support the 
recording function.)
Stop Recording : (*recorder)Stops recording.
Receiver Sound is played through the receiver.
TV Remote Control Buttons Available in Anynet +
 Mode
Device Type Operating Status Available Buttons
Anynet +
 Device After switching to the device, 
when the menu of the 
corresponding device is displayed 
on the screen.
Numeric buttons
▲/▼/◄/►
ENTER
E buttons
Colour buttons
EXIT button
After switching to the device, 
while playing a file
π(Backward search)
μ(Forward search)
∫(Stop) / ∂(Play)
∑(Pause)
Device with built-in
Tuner After switching to the device, 
when you are watching a TV 
programme
P 
> / 
P < button
Audio Device When Receiver is activated
Y / MUTE button
The Anynet +
 function only works when the active source on the TV remote control is set 
to TV.
The 
∏ button works only while in the recordable state.
You cannot control Anynet +
 devices using the buttons on the TV.   
You can control Anynet +
 devices only using the TV remote control.
The TV remote control may not work under certain conditions.   
If this occurs, reselect the Anynet+ device.
The Anynet +
 functions do not operate with other manufacturers’ products.
The 
π, μ operations may differ depending on the device.
■
■
■
■
■
■
If more than one recording 
device is connected, they are 
displayed as (*recorder) and 
if only one recording device is 
connected, it will be represented 
as (*device_name).■
BN68-02315G-01Eng.indd   442009-06-08   �� 11:00:34 
						

							
English
Anynet+
Recording
You can make a recording of a TV programme using a Samsung recorder.
1 Press the TOOLS  button. Press the ENTERE button to select  
Anynet +
 (HDMI-CEC). 
2  Press the ▲ or ▼ button to select Recording Immediately and press the ENTERE button. Recording begins.
When there is more than one recording device.  
When multiple recording devices are connected, the recording devices are\
 
listed. Press the ▲ or ▼ button to select a recording device and press the 
ENTER
E button. Recording begins.
When the recording device is not displayed select  Device List and press the 
Red button to search devices
3  Press the EXIT button to exit.
You can record the source streams by selecting  Recording: (device_name).
Pressing the 
∏ button will record whatever you are currently watching. If you 
are watching video from another device, the video from the device is recorded.
Before recording, check whether the antenna jack is properly connected t\
o the 
recording device. To properly connect an antenna to a recording device, refer 
to the recording device’s users manual.
Listening through a Receiver 
(Home Theatre)
You can listen to sound through a receiver instead of the TV speaker.
1  Press the TOOLS  button. Press the ENTERE button to select Anynet +
 (HDMI-
CEC).
2  Press the ▲ or ▼ button to select Receiver . Press the ◄ or ► button to select 
On or Off.
3  Press the EXIT button to exit.
If your receiver supports audio only, it may not appear in the device list.
The receiver will work when you have properly connected the optical in j\
ack of 
the receiver to the DIGITAL AUDIO OUT (OPTICAL)  jack of the TV.
When the receiver (home theatre) is set to On, you can hear sound outp\
ut 
from the TV’s Optical jack. When the TV is displaying a DTV(air) signal, the 
TV will send out 5.1 channel sound to the Home theatre receiver. When the 
source is a digital component such as a DVD and is connected to the TV via 
HDMI, only 2 channel sound will be heard from the Home Theatre receiver.
If there is a power interruption to the TV when the  Receiver is set to On (by 
disconnecting the power cord or a power failure), the  Speaker Select may be 
set to External Speaker  when you turn the TV on again. (Refer to Page 28)
■
■
■
■
■
■
■
■
■
View TV
Device List
Recording: DVDR
DVDR MENU
DVDR INFO
Receiver: Off
Setup
U Move       E Enter       R Return
View TV
Device List
Recording: DVDR
DVDR MENU
DVDR INFO
Receiver: Off
Setup
U Move       E Enter       R Return
BN68-02315G-01Eng.indd   452009-06-08   �� 11:00:35 
						

							
English
Anynet+
Troubleshooting for Anynet+
Problem 
Possible Solution
Anynet +
 does not work. Check if the device is an Anynet +
 device. The Anynet +
 system supports Anynet +
 devices 
only.
Connect only one receiver (home theatre).
Check if the Anynet +
 device power cord is properly connected.
Check the Anynet +
 device’s Video/Audio/HDMI 1.3 cable connections.
Check whether  Anynet+
 (HDMI-CEC) is set to  On in the Anynet+
 setup menu.
Check whether the TV remote control is in TV mode.
Check whether it is Anynet +
 exclusive remote control.
Anynet +
 doesn’t work in certain situations. (Searching channels, Operating \
 Media Play,  
Plug & Play , etc.)
When connecting or removing the HDMI 1.3 cable, please make sure to sear\
ch devices 
again or turn your TV off and on again.
Check if the Anynet +
 Function of Anynet +
 device is set on.
●
●
●
●
●
●
●
●
●
●
I want to start Anynet +
. Check if the Anynet +
 device is properly connected to the TV and check if the Anynet +
 
(HDMI-CEC) is set to  On in the Anynet+
 Setup menu.
Press the TV button on the TV remote control to switch to TV. Then press the  TOOLS button 
to show the Anynet +
 menu and select a menu you want.●
●
I want to exit Anynet+. Select View TV in the Anynet+
 menu.
Press the SOURCE button on the TV remote control and select a device other than Anynet +
 
devices.
Press P 
>/
						

							
English
Other Information
Other Information
Teletext Feature
Most television stations provide written information services via Teletext. The index page of the Teletext service gives you information 
on how to use the service. In addition, you can select various options t\
o suit your requirements by using the remote control buttons.For Teletext information to be displayed correctly, channel reception must be stable. Otherwise, information may be missing or some 
pages may not be displayed.
■
1 5 (reveal)  Used to display the hidden text (answers to quiz games, for example). \
To display normal screen, press it again.
2 4 (size)  Press to display the double-size letters in the upper half of the screen\
. For lower half of the screen, press it again. To display normal screen, press it once again.
3 8 (store)  Used to store the Teletext pages.4 Colour buttons (red/green/yellow/blue)  If the FASTEXT system is used by a broadcasting company, the different topics covered on a Teletext page are colour-coded and can be selected by pressing the coloured 
buttons. Press one of them corresponding to the required. The page is displayed 
with other coloured information that can be selected in the same way. To display the 
previous or next page, press the corresponding coloured button.
5 / (Teletext on/mix)  Press to activate Teletext mode after selecting the channel providing the Teletext service. Press it twice to overlap the Teletext with the current broadcasting screen.
6 : (exit)  Exit from the Teletext display.7 1 (sub-page) Used to display the available sub-page.8 2 (page up) Used to display the next Teletext page.9 3 (page down) Used to display the previous Teletext page.0 0 (mode) Press to select the Teletext mode (LIST/ FLOF). If you press it in the LIST mode, it switches into the List save mode. In the List save mode, you can save Teletext page into list using the 8(store) button.
! 6 (index)  Used to display the index (contents) page at any time while you are vi\
ewing Teletext.@ 9 (hold) Used to hold the display on a given page if the selected page is linked \
with several secondary pages which follow on automatically. To resume, press it again.
# 7 (cancel)  Used to display the broadcast when searching for a page.
The Teletext pages are organized according to six categories:
Part Contents
A Selected page number.
B Broadcasting channel identity.
C Current page number or search indications.
D Date and time.
E Text.
F Status information.
FASTEXT information.
Teletext information is often divided between several pages displayed in \
sequence, which can 
be accessed by: Entering the page number
Selecting a title in a list
Selecting a coloured heading (FASTEXT system)
Teletext level supported by the TV is version 2.5 which is capable of displaying additional 
graphics or text. 
Depending upon the transmission, blank side panels can occur when displa\
ying Teletext. 
In these cases, additional graphics or text is not transmitted. 
Older TV’s which do not support version 2.5 are not capable of displaying any add\
itional 
graphics or text, regardless of the Teletext transmission.
■
•
•
•
■
■
■
■
You can change Teletext 
pages by pressing the 
numeric buttons on the 
remote control.■
Press the thee TV button to exit 
from the Teletext display.■
BN68-02315G-01Eng.indd   472009-06-08   �� 11:00:35 
						

							
English
Other Information
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, depending 
upon your particular version of Windows and your particular video card. However, even if your actual screens look different, the same basic 
set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1 First, click on ‘Control Pan el’ on the Windows start menu.el’ on the Windows start menu.n the Windows start menu.              
2 When the control panel window appears, click on ‘Appearance and Themes’ and a display dialog-box will appear.      
3 When the control panel window appears, click on ‘Display’ and a display dialogbox will appear.        
4 Navigate to the ‘Settings’ tab on the display dialog-box.The correct size  setting (resolution) - Optimum: 1920 X 1080 pixels.setting (resolution) - Optimum: 1920 X 1080 pixels.g (resolution) - Optimum: 1920 X 1080 pixels.
If a vertical-frequency option exists on your display settings dialog box, the correct  value 
is ‘60’ or ‘60 Hz’. Otherwise, just click ‘OK’ and exit the dialog box.
Display Modes
If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system doesn’t 
equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no video. For the display 
modes listed on the next page, the screen image has been optimized during manufacturing.
D-Sub and HDMI/DVI Input
Mode Resolution Horizontal Frequency (�Hz)Vertical Frequency 
(Hz) Pixel Clock Frequency 
(MHz) Sync Polarity 
(H / V)
IBM 640 x 350
31.46970.086 25.175+/-
720 x 400 31.46970.087 28.322-/+
MAC 640 x 480
35.00066.667 30.240-/-
832 x 624 49.72674.551 57.284-/-
1152 x 870 68.68175.062 100.000 -/-
VESA CVT 720 x 576
35.91059.950 32.750-/+
1152 x 864 53.78359.959 81.750-/+
1280 x 720 44.77259.855 74.500-/+
1280 x 720 56.45674.777 95.750-/+
1280 x 960  75.23174.857 130.000 -/+
VESA DMT 640 x 480
31.46959.940 25.175-/-
640 x 480 37.86172.809 31.500-/-
640 x 480 37.50075.000 31.500-/-
800 x 600 37.87960.317 40.000+/+
800 x 600 48.07772.188 50.000+/+
800 x 600 46.87575.000 49.500+/+
1024 x 768 48.36360.004 65.000-/-
1024 x 768 56.47670.069 75.000-/-
1024 x 768 60.02375.029 78.750+/+
1152 x 864 67.50075.000 108.000 +/+
1280 x 1024 63.98160.020 108.000 +/+
1280 x 1024 79.97675.025 135.000 +/+
1280 x 800 49.70259.810 83.500-/+
1280 x 800 62.79574.934 106.500 -/+
1280 x 960 60.00060.000 108.000
+/+
1360 x 768 47.71260.015 85.500+/+
1440 x 900 55.93559.887 106.500 -/+
1440 x 900 70.63574.984 136.750 -/+
1680 x 1050 65.29059.954 146.250 -/+
VESA GTF 1280 x 720
52.50070.000 89.040-/+
1280 x 1024 74.62070.000 128.943 -/-
VESA DMT /  DTV CEA 1920 x 1080p
67.50060.000 148.500  +/+
When using an HDMI / DVI cable connection, you must use the  HDMI IN 3(DVI) jack.
The interlace mode is not supported.
The set might operate abnormally if a non-standard video format is selec\
ted.
Separate and Composite modes are supported. SOG is not supported.
Too long or low quality VGA cable can cause picture noise at high resolution modes (1920x1080).
■
■
■
■
■
■
■
BN68-02315G-01Eng.indd   482009-06-08   �� 11:00:36 
						

							
English
Other Information
Troubleshooting: Before Contacting Service 
Personnel
No sound or pictureCheck that the mains lead has been connected to a wall socket.
Check that you have pressed the button on your set.
Check the picture contrast and brightness settings.
Check the volume.●
●
●
●
Normal picture but no soundCheck the volume.
Check whether the MUTEM button has been pressed on the remote control.
Check the Speaker Select settings.●
●
●
Screen is black and power 
indicator light blinks steadily On your computer check; Power, Signal Cable.
The TV is using its power management system.
Move the computer’s mouse or press any key on the keyboard.●
●
●
No picture or black and white 
pictureAdjust the colour settings.
Check that the broadcast system selected is correct.●
●
Sound and picture interference
Try to identify the electrical appliance that is affecting the set and move it further away.
Plug your set into a different mains socket.●
●
Blurred or snowy picture, 
distorted soundCheck the direction, location and connections of your aerial.
This interference is often due to the use of an indoor aerial.●
●
Remote control malfunctions
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.●
●
●
‘Check signal cable.’ message is 
displayedCheck that the signal cable is firmly connected to the PC or video sources.
Check that the PC or video sources are turned on.●
●
On PC mode, ‘Not Supported 
Mode.’ message is displayedCheck the maximum resolution and the frequency of the video adaptor.
Compare these values with the data in the Display Modes.●
●
The damaged picture appears in 
the corner of the screenIf 
Screen Fit is selected in some external devices, the damaged picture may appear in\
 
the corner of the screen. This symptom is caused by external devices, not TV.●
The ‘Resets all settings to 
the default values.’ message 
appears. This appears when you press and hold the 
EXIT button for a while. The product settings 
are reset to the factory defaults.●
You may see small particles if 
you look closely at the edge of 
the bezel surrounding the TV 
screen. This is part of the product’s design and is not a defect.●
This TFT LCD panel uses a panel consisting of sub pixels (6 220 800) which req\
uire sophisticated technology to produce. 
 
However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.■
BN68-02315G-01Eng.indd   492009-06-08   �� 11:00:36 
						

							0
English
Other Information
Specifications
Model NameLE32B550, LE32B551
LE32B553, LE32B554 LE37B550, LE37B551
LE37B553, LE37B554
Screen Size 
(Diagonal) 32 inch
37  inch
Power Consumption
Standby