Samsung Le 32t51b Owners Instructions

English-9
SETTING THE PICTURE
You can select the type of picture which best corresponds to your
viewing requirements.
1.Press the MENU button to display the menu. Press the or button to select “Picture”, then press theENTERbutton.
2.Press theENTERbutton again, to select “Mode”.
3.Press theENTERbutton again, to select “Mode”.
4.Press theor  button to select the desired picture effect.
Press the ENTERbutton.
5.Press the EXIT button to exit.

Dynamic: Selects the picture for high-definition in a bright...

English-10
You can return to the factory defaults picture settings.
1.To  select the desired picture effect, follow the 
“Changing the Picture Standard” instructions number 1 to 4 on page\
 9.
2.Press the or button to select “Reset”, then press the ENTERbutton.
3.Press the EXIT button to exit.
The “Reset” will be set for each picture mode.
Resetting the Picture Settings to the Factory Defaults
In PC Mode, only “16:9” and “4:3” mode can be adjusted.Select       by pressing the 
or buttons. 
Use the or...

English-11
You can display a sub picture within the main picture of set 
programme or video input. In this way, you can watch the picture of set
programme or video input from any connected equipment while watching
the main picture.
1.Press the MENU button to display the menu. Press the or button to 
select “Picture”, then press the ENTERbutton.
2.Press the or button to select “PIP”, then press the ENTERbutton.
3.Press the ENTERbutton again. 
Press the or button to select “On”, then press...

English-12
Each broadcasting station has its own signal conditions, and so it is no\
t
easy for you to adjust the volume every time the channel is changed. 
This feature let you automatically adjust the volume of the desired 
channel by lowering the sound output when the modulation signal is 
high or by raising the sound output when the modulation signal is low.
1.Press the MENU button to display the menu. Press the or button to 
select “Sound”, then press the ENTERbutton.
2.Press the or button to...

English-13

During the PIP feature is activating, you can listen to the sound of the
sub picture.
1.Press the MENU button to display the menu. Press the or button to 
select “Sound”, then press the ENTERbutton.
2.Press the or button to select “Sound Select”, then press theENTERbutton.
3.Press the or button to select “Sub”. Press the ENTERbutton.
4.Press the EXIT button to exit.
Y ou can select this option when the “PIP” is set to “On”.
Listening to the Sound of the Sub Picture

Main:Used to listen...

English-14
You can set the On/Off timers so that the set will:
Switch on automatically and tune to the channel of your choice atthe time you select.
Switch off automatically at the time you select.
1.Press the MENU button to display the menu. Press the or button to 
select “Setup”, then press the ENTERbutton.
2.Press the or button to select “Time”, then press the ENTERbutton.
3.Press the or button to select “On Timer”, then press theENTERbutton.
4.Press the or button to adjust “Hour”, then press...

English-15
This feature adjusts the brightness of TV so as to reduce the power 
consumption. When you watching TV at night, set the  "Energy Saving "
mode option to "High" so as to reduce the dazzling of your eyes as well
as the power consumption.
1.Press the MENU button to display the on-screen menu.
Press the or button to select “Setup”, then press theENTERbutton.
2.Press the or button to select “Energy Saving”, 
then press theENTERbutton.
3.Select the required option (Off, Low,...

English-16
USING THE TELETEXT FEATURE
Most set channels carry “ teletext ”, pages of written 
information that provide information such as:Television programme times.
News bulletins and Weather forecasts.
Sports results.
Subtitles for the hard of hearing.
The teletext pages are organized according to six categories:
Part A
B
C
D
E F Contents
Selected page number.
Broadcasting station identity.
Current page number or search status.
Date and time.
Te
xt.
Status information.
T eletext Decoder
Name the...

English-17
You can display teletext information at any time, but signal reception
must be good. Otherwise:
Information may be missing.       
Some pages may not be displayed.
To  activate the teletext mode and display the contents page:
1.Using the P()  or P() button, select the channel providing the
teletext service.
2.Press the TTX/MIX()  button to activate the teletext mode.The contents page is displayed. It can be redisplayed at any time by pre\
ssing
the MENU() bu tton.
3.Press the TTX/MIX() button...

English-18
The various topics included in the teletext pages are colour-coded, and \
can
be selected by pressing the coloured buttons on the remote control.
1.Display the teletext contents page by pressing the TTX/MIX() button.
2.Press the coloured button corresponding to the topic that you wish to
select (The available topics are listed on the status information line)\
.
3.Press the Red button to display the previous page.
Press the Green button to display the next page.
4.Press the TV() button again to...