Samsung LE 32B653 User Manual

11
English
Getting Started

Viewing the Control Panel
The product colour and shape may vary depending on the model.The front panel buttons can be activated by touching it with your finger\
.■■
Speakers
Press to increase or decrease the volume. In the on-screen menu, use the Y buttons as you would use the ◄ and ► buttons on the remote control.
Press to change channels. In the on-screen menu, use the z buttons as you would use the ▼ and ▲ buttons on the remote control.
Aim the remote control towards this...

1
English
Getting Started

Viewing the Connection Panel
The product colour and shape may vary depending on the model.
1 COMPONENT IN  Connects Component video / audio.
2 HDMI IN 1, 2, 3(DVI), 4 / DVI AUDIO IN Connects to the HDMI jack of a device with an HDMI output.No sound connection is needed for an HDMI to HDMI connection.What is HDMI?
HDMI(High-Definition Multimedia Interface), is an interface that enabl\
es the transmission of digital audio and video signals using a single cable.
The...

1
English
Getting Started

7 H(HEADPHONE)Headphone may be connected to the headphone output on your set. While th\
e head phone is connected, the sound fromthe built-in speakers will be disabled.Using the sound function is restricted when connecting headphones to the\
 TV.Prolonged use of headphones at a high volume may damage your hearing.You will not hear sound from the speakers when you connect headphones to \
the TV.The headphone volume and TV volume are adjusted separately.
8 DIGITAL AUDIO OUT...

1
English
Getting Started

Connections
Digital Audio connection
Digital Audio System
Using an Optical Cable
OPTICAL
Analog Audio connection
Amplifier / DVD Home Theater
Using a Audio Cable
AUDIO IN
OPTICAL (Digital)
AUDIO (Analog)
Best
Normal
HD connection
Using a D-Sub CableUsing an HDMI Cable
HDMI OUT
Using a D-Sub CableUsing a D-Sub Cable
PC OUTAUDIO OUT
HD connection
Using a D-Sub CableUsing an HDMI/DVI Cable
DVI OUTAUDIO OUT

BN68-01900M-01Eng.indb   142009-04-13   �� 10:07:17 

1
English
Getting Started

Installing Batteries in the Remote Control
1 Lift the cover at the back of the remote control upward as shown in the \
figure.       
2 Install two AAA size batteries. Make sure to match the ‘+’ and ‘–’ ends of the batteries with the diagram inside the compartment.
3 Replace the cover.Remove the batteries and store them in a cool, dry place if you won’t\
 be using the remote control for a long time. (Assuming typical TV usage, the batteries should last for about one...

1
English
Getting Started
Teletext Functions (p. 82)
0Teletext mode selection (LIST / FLOF)5Teletext reveal3Teletext previous page
8Teletext store:Exit from the Teletext display6Teletext index
4Teletext size selection1Teletext sub page9Teletext hold
Colour buttonsFastext topic selection2Teletext next page7Teletext cancel
Viewing the Remote Control
You can use the remote control up to a distance of about 23 feet from the\
 TV.The performance of the remote control may be affected by bright light.The...

1
English
Basic Operation
Basic Operation
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consu\
mption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example)\
.
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automaticall\
y and subsequently.
1 Press the POWERP button. You can also use the POWERP button on the TV.The message Select the OSD Language. is...

1
English
Basic Operation
If you want to reset this feature...
1 Press the MENU button.  Press the ▲ or ▼ button to select Setup, then press the ENTERE button.
2 Press the ENTERE button again to select Plug & Play.
3 Enter your 4 digit PIN number. The default PIN number of a new TV set is ‘0-0-0-0’.If you want to change PIN number, use the Change PIN function. 
Viewing the Display
The display identifies the current channel and the status of certain aud\
io-video settings.
1 Press the INFO button on...

1
English
Using the Menus
Using the Menus
Viewing the Menus
Menu provides one button access for controlling your TV. It enables you to perform a variety of tasks intuitively with a control panel on the screen rather than a variety of remote control button press\
es.
Operation the Menu
The access step may differ depending on the selected menu.
1 Press the MENU button. The menu is displayed on the screen.
2 Press the ▲ or ▼ button to select one of the icons. Press the ENTERE button to access the...

0
English
Using the Menus

Channel
OptionDescription
Auto StoreAir / Cable
Antenna source to memorizeDigital & Analogue: Digital and Analogue channels.Digital: Digital channels.Analogue: Analogue channels.
When selecting Cable → Digital & Analogue 
or Cable → Digital:
Provide a value to scan for cable channels.Search Mode → Full / Network /QuickQuickNetwork ID: Displays the network identification code.Frequency: Displays the frequency for the channel. (Differs in each country)Modulation: Displays...