Samsung LE 32B651 User Manual

							
1
English
Using the Menus

Channel
OptionDescription
Full Guide /  Mini Guide /  Default Guide
The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank or out of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new information becomes available.
Full Guide
Displays the programme information as time ordered One hour segments. Two hours of programme information is displayed which may be scrolled forwards or backwards in time.
❑
Mini Guide
The information of each programme is displayed by each line on the current channel Mini Guide screen from the current programme onwards according to the programme starting time order.
Default Guide → Mini Guide / Full Guide
You can decide whether to display either the Mini Guide or the Full Guide when the GUIDE button on the remote control is pressed.
❑
❑
Using the Full / Mini Guide
To...Then...
Watch a programme in the EPG listSelect a programme by pressing the ▲, ▼, ◄, ► button.
Exit the guidePress the Blue button
If the next programme is selected, it is scheduled with the clock icon d\
isplayed. If the ENTERE button is pressed again, press the ◄, ► button to select Cancel Schedules, the scheduling is cancelled with the clock icon gone. 
View programme informationSelect a programme of your choice by pressing the ▲, ▼, ◄, ► button. Then press the INFO button when the programme of your choice is highlighted.The programme title is on the upper part of the screen centre. 
Please click on INFO button for the detailed information. Channel Number, Running Time, Status Bar, Parental Level, Video Quality Information (HD / SD), Sound Modes, Subtitle or Teletext, languages of Subtitle or Teletext and brief summary of the highlighted programme are included on the detailed information. “...” will be \
appeared if the summary is long.
Toggle between the Mini Guide and Full GuidePress the Red button repeatedly.
In Full Guide Scrolls backwards quickly (24 hours). Scrolls forwards quickly (24 hours).Press the Green button repeatedly.Press the Yellow button repeatedly.
In Mini GuideDisplay previous page quickly.Display next page quickly.Press the Green button.Press the Yellow button.
You can also display the guide menu simply by pressing the GUIDE button. (To configure the Default Guide, refer to the descriptions.)
■
123
456
78
0
9
P
(Red) 
Full Guide
E Watch     Information    ◀◀ ▶▶ Page     Mini Guide     +24 Hours     Exit
DTV Cable 900 f tn                         2:10 Tue 1 JunFreshmen On Campus 2:00 - 2:30No Detailed InformationToday2:00 - 3:003:00 - 4:00
Mint ExtraLoaded40 with Dynamite MCThe DistillerySmash Hits! Sunday
900       f tn901       ITV Play902       Kerrang!903       Kiss904       oneword905       Hits▼
Street Hypn..
KisstoryNo Information
No Information
No Information
Freshmen O..
  900
E Watch     Information    ◀◀ ▶▶ Page     Full Guide     Next Page     Exit
Mini GuideDTV Cable 900 f tn
Street HypnosisBooze Britain
2:002:305:00
Freshmen On Campus
▼
Full Guide
Mini Guide

BN68-01900M-01Eng.indb   212009-04-13   �� 10:07:19 
						

							

English
Using the Menus

Channel
OptionDescription
Channel ListUsing this menu, you can add / delete or set favourites channels and use the programme guide for digital broadcasts.
All Channels
Shows all currently available channels.
Added Channels
Shows all added channels.
Favourites
Shows all favourite channels.
Programmed
Shows all current reserved programmes.
Select a channel in the All Channels, Added Channels or Favourites screen by pressing the ▲ / ▼ buttons, and pressing the ENTERE button. Then you can watch the selected channel. 
Using the Colour buttons with the Channel List
Red (Channel Type): Toggle between your TV, Radio, Data / Other and All.Green (Zoom): Enlarges or shrinks a channel number.Yellow (Select): Selects multiple channel lists. You can perform the add/delete or add to favourites/delete from favourites function for multiple channels at the same time. Select the required channels and press the Yellow button to set all the selected channels at the same time. The c mark appears to the left of the selected channels.
Channel List Option Menu (in All Channels / 
Added Channels / Favourites)
Press the TOOLS button to use the option menu.Option menu items may differ depending on the channel status.
Add / Delete
You can delete or add a channel to display the channels you want.All deleted channels will be shown on All Channels menu.You can also delete a channel to the Added Channels or Favourites menu in the same manner.
Add to Favourite / Delete from Favourite
You can set channels you watch frequently as favourites.Press the TOOLS button to display the Tools menu. You can also set the add to (or delete from) Favourite by selecting Tools → Add to Favourite (or Delete from Favourite).The “*” symbol will be displayed and the channel will be set as a favourite.All favourite channels will be shown on Favourites menu.
Lock / Unlock
You can lock a channel so that the channel cannot be selected and viewed. This function is available only when the Child Lock is set to On. The PIN number input screen appears. Enter your 4 digit PIN number.The default PIN number of a new TV set is “0-0-0-0”. You can change the PIN, by selecting Change PIN from the menu.The “\” symbol will be displayed and the channel will be locked.
❑
❑
❑
❑
■
■■
■■
❑
■
■
❑
T
■
■
❑
■
■
■
■
TOOLS (Tools): Displays the Delete (or Add), Add to Favourite (or Delete from Favourite), Lock (or Unlock), Timer Viewing, Edit Channel Name, Edit Channel Number, Sort, Select All (or Deselect All), Auto Store menu. (The Options menus may differ depending on the situation.)
■
Channel Status Display IconsA: An Analogue channel.c: A channel selected by pressing the Yellow button.*: A channel set as a Favourite.(: A programme currently being broadcast.\: A locked channel.): A reserved programme
■••
•
•
••
A gray-coloured channel indicates the channel has been deleted.The Add menu only appears for deleted channels.
■
■
You can select these options by simply pressing the CH LIST button on the remote control.To select the favourites channels you have set up, press the FAV.CH button on the remote control.
■
■
All Channels824          UKTV Gold825          UKTV style
A 1     C --
A 2          C --A 3          C --A 4          C --A 5          C --A 6          C --A 7          C --A 8          C --            All         Channel Type    Zoom    Select   T Tools
DeleteAdd to FavouriteLockTimer ViewingEdit Channel NameSort                                       ›

BN68-01900M-01Eng.indb   222009-04-13   �� 10:07:19 
						

							

English
Using the Menus

Only Analogue TV channels can be fine tuned.■
The names of digital broadcasting channels are automatically assigned and cannot be renamed.
■
You can only select Deselect All when there is a selected channel.
■
If a channel is locked using the Child Lock function, the PIN input window appears.
■
Only memorized channels can be reserved.■
Channel
OptionDescription
Channel ListTimer ViewingIf you reserve a programme you want to watch, the channel is automatically switched to the reserved channel in the Channel List; even when you are watching another channel. To reserve a programme, set the current time first. You can set the channel, day, month, year, hour and minute directly by pressing the number buttons on the remote control.Reserving a programme will be shown in the Programmed menu.Digital Programme Guide and Viewing Reservation:  When a digital channel is selected, and you press the ► button, the Programme Guide for the channel appears. You can reserve a programme according to the procedures described above.
Edit Channel Name (analogue channels only)Channels can be labelled so that their call letters appear whenever the channel is selected.
Edit Channel Number (digital channels only)You can also edit the channel number by pressing the number buttons on the remote control.
Sort (analogue channels only)This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store.
Select All / Deselect AllSelect All: You can select all the channels in the channel list.Deselect All: You can deselect all the selected channels.
Auto StoreFor detailed procedures on setting up options, refer to pages 19~20.
Channel List Option Menu (in Programmed)
You can view, modify or delete a reservation.Press the TOOLS button to use the option menu.
Change InfoSelect to change a viewing reservation.
Cancel Schedules
Select to cancel a viewing reservation.
Information
Select to view a viewing reservation. (You can also change the reservation information.)
Select All
Select all reserved programmes.
❑
■
■
■
❑
❑
❑
❑■
■
❑
❑
❑
❑
❑
Channel ModeWhen press the P >/< button, Channels will be switched within the selected channel list.
Added Ch.
Channels will be switched within the memorized channel list.
Favourite Ch.
Channels will be switched within the favourite channel list.
❑
❑
Fine TuneIf the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, you may have to fine tune the channel manually.Fine tuned channels that have been saved are marked with an asterisk ‘*’ on the right-hand side of the channel number in the channel banner.To reset the fine-tuning, select Reset by pressing the  ▲ or ▼ button and then press the ENTERE button.
■
■
Programmed1 / 1 / 2009
13:59   5  TV1   ) 
18:59     2    TV3    ) The Equalizer20:59     2    TV3    ) McMillan & Wife21:59     2    TV3    ) M.Spillane’s mike 
            All        Zoom    Select   T Tools    E Information
Change InfoCancel SchedulesInformationSelect All                                       

BN68-01900M-01Eng.indb   232009-04-13   �� 10:07:19 
						

							

English
Using the Menus

7
 U Move    L Adjust     E Enter     R Return
      ▲Backlight      ▼
Picture Menu
Picture
OptionDescription
ModeSelects the type of picture settings that best correspond to your viewing preferences or requirements. Presets a higher brightness, contrast, and sharpness to the picture.Dynamic
Recommended for use in bright room conditions. Standard
Recommended for use in a normal viewing condition.Natural
Adds more punch and contrast to the image than the Standard mode.Movie
Corresponding to the conditions used in movie, recommended for use in darker viewing conditions.
■
■
■
■
Backlight /  Contrast /  Brightness /  Sharpness /  Colour /  Tint(G/R)
Your television has several setting options that allow you to control the picture quality.Backlight
Adjusts the brightness of LCD back light.Contrast
Increases or decreases the brightness in white areas of the picture. Too little contrast and the picture may seem dark; too much contrast and the picture will lose details in white images.Brightness
Increases or decreases the overall brightness of the picture, but best used to adjust the black level of the image. Too little brightness and shadow detail will be lost; too much brightness and blacks will be gray and washed out. Sharpness
Increases or decreases the apparent detail in the picture. Too little sharpness and the image might look soft. Too much sharpness can add false edges to objects or can make noise more noticeable.  Colour
Increases or decreases colour saturation levels in the picture. Too little colour and the image will be black and white (undersaturated); too much colour and the image will look oversaturated and cartoonish.Tint(G/R)
Changes the picture hue from reddish to a greenish appearance.
■
■
■
■
■
■
Advanced SettingsSamsung’s new TVs allow you to make even more precise picture settings than previous models.Black Tone → Off / Dark / Darker / Darkest
Increases the picture’s shadow detail by lightening the black level (ie changing the gamma) at low levels. This is most commonly used for watching movies with dark scenes to keep the picture from appearing washed out in bright rooms.Dynamic Contrast → Off / Low / Medium / High
Increases or decreases the difference between the brightest and darkest portions of the image with changing scenes. Shadows are more visible with dark scenes, while contrast is enhanced with bright scenes. 
■
■
Press the TOOLS button to display the Tools menu. You can also set the picture mode by selecting Tools → Picture Mode.
■
Only analogue TV, Ext., AV modes of the PAL system, you cannot use the Tint(G/R) Function.When you make changes to Backlight, Contrast, Brightness, Sharpness, Colour or Tint(G/R), the OSD will be adjusted accordingly.In PC mode, you can only make changes to Backlight, Contrast and Brightness.Settings can be adjusted and stored for each external device you have connected to an input of the TV.The energy consumed during use can be significantly reduced if the brightness level of the picture is lowered, which will reduce the overall running cost.
■
■
■
■
■
Mode : Standard ▶
Backlight  : 7
Contrast  : 95
Brightness  : 45
Sharpness  : 50
Colour  : 50
Tint (G/R)  : G50/R50
Advanced Settings
Picture
Natural is not available in PC mode.■
Black Tone  : Off   ▶
Dynamic Contrast  : Medium
Gamma  : 0
Colour Space  : Native
White Balance
Flesh Tone : 0
Edge Enhancement  : On
U Move     E Enter     R Return
Advanced Settings

BN68-01900M-01Eng.indb   242009-04-13   �� 10:07:20 
						

							

English
Using the Menus

Picture
OptionDescription
Advanced SettingsGamma
Changes the rate at which images ramp or fade from light to dark. Recommended for advanced users only. 
Colour Space
Increases or decreases the visible colour range for red, green and blue. Recommended for advanced users only. 
Auto: The TV will choose the colour range that is closest to the range used during TV and movie production.
Native: Displays the most enhanced, vibrant colours possible. 
Custom: Provides precise saturation and colour point adjustment of Red, Green, Blue, Yellow, Cyan, and Magenta. Recommended for advanced users only. 
White Balance
You can adjust the colour temperature for more natural picture colours.
R, G, B-Offset: Fine tunes the white balance, or colour ‘temperature’ in dark areas by changing the individual values of R, G, B. Recommended for advanced users only.
R, G, B-Gain: Fine tunes the white balance, or colour ‘temperature’ in the light areas by changing the individual values of R, G, B. Recommended for advanced users only.
Reset: Resets the colour space to the default values.
Flesh Tone
Adjusts the colour of flesh tones. Increasing the value creates a more reddish picture. Decreasing the value creates a more greenish picture. 
Edge Enhancement 
Increases or decreases the emphasis at object edges.
xvYCC
Setting the xvYCC mode to on increases detail and colour space when watching movies from an external device (ie. DVD player) connected to the HDMI or Component IN jacks.
■
■
•
•
•
■
•
•
•
■
■
■
Picture OptionsColour Tone
Selects a preset white balance, or ‘colour temperature’ setting, to provide either a reddish or bluish hue, dependant upon your personal preference.
Cool: Selects a white balance, or colour ‘temperature’ with a bluish hue. Skin tones may have less warmth but whites will seem brighter. Recommended when watching normal TV broadcasting in a bright room.
Normal: Selects the white balance, or colour “temperature” with a less bluish, more reddish hue. Suitable for most viewing environments and programs.
Warm1, Warm2, Warm3: Selects a redder, warmer hue that more closely matches the setting on monitors used in the production of TV and movie content. Recommended when watching movie and dramatic TV content. The lowest setting is best used for black & white content. 
■
•
•
•
Advanced Settings is available in Standard or Movie mode.In PC mode, you can only make changes to Dynamic Contrast, Gamma and White Balance from among the Advanced Settings items.Colour is available when Colour Space is set to Custom.In Colour, you can adjust the RGB values for the selected colour.To reset the adjusted RGB value, select Reset.
■
■
■
■
■
xvYCC is available when the picture mode is set to Movie, and the external input is set to HDMI or Component mode.This function may not be supported depending on your external device.
■
■
In PC mode, you can only make changes to the Colour Tone and Size from among the items in Picture Options.Warm1, Warm2 or Warm3 is only activated when the picture mode is Movie.
■
■
Colour Tone : Normal   ▶
Size  : Auto Wide
Screen Mode  : 16:9
Digital NR  : Auto
HDMI Black Level  : Normal
Film Mode  : Off
100Hz Motion Plus  : Standard
  ▼
U Move     E Enter     R Return
Picture Options

BN68-01900M-01Eng.indb   252009-04-13   �� 10:07:20 
						

							

English
Using the Menus

Picture
OptionDescription
Picture OptionsSizeChanges the screen shape in terms of height and width. Also known as Aspect Ratio.Auto Wide: Enables the correct picture size to match the original video signal.16:9: Sets the picture aspect ratio to fill the screen. Wide Zoom: Enlarges the middle part of the picture.Zoom: Magnifies the picture contents horizontally and vertically.4:3: Sets the picture aspect ratio to 4:3 with black or gray side bars.Screen Fit: Matches every pixel of the original image to a pixel on the TV screen (aka 1:1 pixel mapping) to show the entire image.  Wide Zoom: Press the ► button to select Position, then press the ENTERE button.  Press the ▲ or ▼ button to move the picture up / down. Then press the ENTERE button.Zoom: Press the ► button to Select Position, then press the ENTERE button. Press the ▲ or ▼ button to move the picture up and down. Then press the ENTERE button. Press the ► button to Select Size, then press the ENTERE button. Press the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction. Then press the ENTERE button.After selecting Screen Fit in HDMI (1080i / 1080p) or Component (1080i / 1080p) mode: Select Position by pressing the ◄ or ► button. Use the ▲, ▼, ◄ or ► button to move the picture. Reset: Press the ◄ or ► button to select Reset, then press the ENTERE button. You can initialize the setting.If you use the Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the Overscan function.When Double (À, Œ) mode has been set in PIP, the Picture Size cannot be set.Screen ModeWhen setting the picture size to Auto Wide in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is intended for users to select it.16:9: Sets the picture to 16:9 wide mode.Wide Zoom: Magnify the size of the picture more than 4:3.Zoom: Magnify the size of the picture vertically on screen.4:3: Sets the picture to 4:3 normal mode.Digital NR → Off / Low / Medium / High / AutoCan reduce the grain effect or level of video snow seen in images coming from poor quality sources.HDMI Black Level → Normal / LowAdjusts the black level in the picture according to the type of signal being transmitted through HDMI. Film ModeApplies the appropriate video processing needed to achieve the best picture quality for watching movies.
Off: Turn the Film Mode function off.
Auto1: Improves the picture quality for fast motion scenes. 
Auto2: Allows a smoother text motion on fast motion scenes. 
■
•
••
•
•
•
●
●
●
●
●
■
••
•
•■
■
■
•
•
•
This function is active only when an external device is connected to the TV via HDMI (RGB signals).
■
Film Mode is supported in TV, AV, COMPONENT(480i / 1080i) and HDMI(480i / 1080i).
■
Depending on the input source, the picture size options may vary.The items available may differ depending on the selected mode.In PC Mode, only 16:9 and 4:3 mode can be adjusted.Settings can be adjusted and stored for each external device you have connected to an input of the TV.Temporary image retention may occur when viewing a static image on the set for more than two hours.
■
■
■
■
■
Press the TOOLS button to display the Tools menu. You can also set the size by selecting Tools → Picture Size.
■
This function is available in Auto Wide mode.This function is not available in PC, Component or HDMI mode.
■
■

BN68-01900M-01Eng.indb   262009-04-13   �� 10:07:20 
						

							

English
Using the Menus

Picture
OptionDescription
Picture Options100Hz Motion Plus → Off / Clear / Standard / Smooth / Custom / DemoRemoves drag from fast scenes with a lot of movement to provide a clearer picture.If you enable 100 Hz Motion Plus, noise may appear on the screen. If this occurs, set 100Hz Motion Plus to Off.Off: Switches 100Hz Motion Plus off.Clear: Sets 100Hz Motion Plus to minimum.Standard: Sets 100Hz Motion Plus to medium.
Smooth: Sets 100Hz Motion Plus to maximum.Custom: Adjusts the blur and judder reduction level to suit your preference.Blur Reduction: Adjusts the blur reduction level from video sources.Judder Reduction: Adjusts the judder reduction level from video sources when playing films.Reset: Reset the custom settings.Demo: Displays the difference between 100Hz Motion Plus on and off modes.Blue Only Mode Helps to adjust the colour and tint controls when used with colour bar test patterns. Recommended for qualified picture alignment specialists only. Available only when the Picture Mode is set to Movie or Standard. 
■
•••
••
●
●
●•
■
Picture ResetResets all picture settings to the default values.Reset Picture Mode: Current picture values return to default settings.■
Picture (In the PC mode)
OptionDescription
Auto AdjustmentUse the Auto Adjust function to have the TV set automatically adjust the video signals it receives.
The function also automatically fine-tunes the settings and adjusts the frequency values and positions.
ScreenCoarse / Fine
The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjust the picture so that it is aligned on the centre of screen.PC Position
Adjust the PC’s screen positioning if it does not fit the TV screen. 
Press the ▲ or ▼ button to adjusting the Vertical-Position. Press the ◄ or ► button to adjust the Horizontal-Position.Image Reset
You can replace all image settings with the factory default values.
■
■
■
Blue Only Mode is available when the picture mode is set to Movie or Standard.
■
Preset: Press the SOURCE button to select PC mode.This function does not work in DVI-HDMI mode.
■
■
Press the TOOLS button to display the Tools menu. You can also set the Auto Adjustment by selecting Tools → Auto Adjustment.
■

BN68-01900M-01Eng.indb   272009-04-13   �� 10:07:20 
						

							

English
Using the Menus

Sound Menu
Sound
OptionDescription
ModeStandard: Selects the normal sound mode.Music: Emphasizes music over voices.Movie: Provides the best sound for movies.Clear Voice: Emphasizes voice over other sounds.Custom: Recalls your customized sound settings.
■■■■■
EqualizerThe sound settings can be adjusted to suit your personal preferences.Mode: Selects the sound mode among the predefined settings.Balance L/R: Adjusts the balance between the right and left speaker.100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment): To adjust the level of different bandwidth frequencies.Reset: Resets the equalizer settings to the default values.
■
■
■
■
SRS TruSurround HDSRS TruSurround HD is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers.  It is fully compatible with all multichannel formats.
Audio LanguageYou can change the default value for audio languages. Displays the language information for the incoming stream.While viewing a digital channel, this function can be selected.You can only select the language among the actual languages being broadcast.
■
■
Audio FormatWhen sound is emitted from both the main speaker and the audio receiver, a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver. In this case, use the TV Speaker function.While viewing a digital channel, this function can be selected.The Audio Format appears according to the broadcasting signal.
■
■
Audio DescriptionThis is an auxiliary audio function that provides an additional audio track for visually challenged persons. This function handles the Audio Stream for the AD (Audio Description), when it is sent along with the Main audio from the broadcaster. Users can turn the Audio Description On or Off and control the volume.Audio DescriptionTurn the audio description function on or off.VolumeYou can adjust the audio description volume.Volume is active when Audio Description is set to On.While viewing a Digital channel, this function can be selected.
■
■
•
•
Auto VolumeEach broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.
Speaker SelectWhen you watch TV with it connecting to a Home theatre, turn the TV speakers off so you can listen to sound from the Home theatre’s (external) speakers.External Speaker: Used to listen to the sound of the External (Home Theatre) Speakers.TV Speaker: Used to listen to the sound of the TV Speakers.
■
■
The volume buttons and MUTE buttons do not operate when the Speaker Select is set to External Speaker.If you select External Speaker in the Speaker Select menu, the sound settings will be limited.
■
■
Press the TOOLS button to display the Tools menu. You can also configure the sound mode by selecting Tools → Sound Mode.
■
Press the TOOLS button to display the Tools menu. You can also set the SRS TruSurround HD by selecting Tools → SRS TS HD.
■
Mode : Custom ▶
Equalizer
SRS TruSurround HD  : Off
Audio Language  : ----
Audio Format  : ----
Audio Description
Auto Volume : Off
Speaker Select  : TV Speaker
Sound

BN68-01900M-01Eng.indb   282009-04-13   �� 10:07:20 
						

							

English
Using the Menus

Selecting the Speaker
TV’s Internal SpeakersAudio Out (Optical, L/R Out) to Sound System
RF / AV / Component / PC / HDMIRF / AV / Component / PC / HDMI
TV SpeakerSound OutputSound Output
External SpeakerMuteSound Output
Video No SignalMuteMute
Sound
OptionDescription
Sound SelectWhen the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.You can select this option when PIP is set to On.■
Sound ResetYou can restore the Sound settings to the factory defaults.
Reset Sound Mode: Current sound values return to default settings.
Selecting the Sound Mode
You can set the sound mode in the Tools menu. When you set to Dual l ll, the current sound mode is displayed on the screen.
Audio TypeDual 1 / 2Default
A2 Stereo
MonoMONOAutomatic changeStereoSTEREO ↔ MONO
DualDUAL 1 ↔ DUAL 2DUAL 1
NICAM Stereo
MonoMONOAutomatic changeStereoMONO ↔ STEREO
DualMONO ↔ DUAL 1 DUAL 2DUAL 1
If the stereo signal is weak and an automatic switching occurs, then swi\
tch to the mono.This function is only activated in stereo sound signal. It is deactivate\
d in mono sound signal.This function is only available in TV mode.
■■
■
Press the TOOLS button to display the Tools menu. You can also set the sound of the sub picture by selecting Tools → PIP → Sound Select.
■
Sound Reset
 L Move     E Enter     R Return
Cancel sound reset.
Reset AllReset Sound ModeCancel

BN68-01900M-01Eng.indb   292009-04-13   �� 10:07:20 
						

							
0
English
Using the Menus

Setup Menu
Setup
OptionDescription
LanguageYou can set the menu language.
TimeClock
Setting the clock is necessary in order to use the various timer features of the TV. If you disconnect the power cord, you have to set the clock again.Clock ModeYou can set up the current time manually or automatically.Auto: Set the current time automatically using the time from the digital broadcast.Manual: Set the current time to a manually specified time.Clock SetYou can set the current time manually.This function is only available when Clock Mode is set to Manual.You can set the day, month, year, hour and minute directly by pressing the number buttons on the remote control.
Sleep Timer
The sleep timer automatically shuts off the TV after a preset time (30, 60, 90, 120, 150 and 180 minutes).To cancel the Sleep Timer function, select Off.
Timer 1 / Timer 2 / Timer 3
Three different on / off timer settings can be made.You must set the clock first.On TimeSet the hour, minute, and activate / inactivate.(To activate timer with the setting you’ve chosen, set to Activate.)Off TimeSet the hour, minute, and activate / inactivate.(To activate timer with the setting you’ve chosen, set to Activate.)VolumeSet the desired volume level.Source → TV / USBYou can select the TV or USB device content to be played when the TV turns on automatically. Select TV or USB. (Make sure that an USB device is connected to your TV.)Antenna (when Source is set to TV)Select ATV or DTV.Channel (when Source is set to TV)Select the desired channel.Contents (when Source is set to USB)You can select a folder on the USB Device with music or photo files to be played when the TV turns on automatically.If the folder name is too long, the folder cannot be selected.If you are using two of the same type USB device, be sure the folder names are different so the correct USB is read.RepeatSelect Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.When Manual is selected, press the ► button to select the desired day of the week. Press the ENTERE button over the desired day and the c mark will appear.You can set the hour, minute and channel by pressing the number buttons on the remote control.
❑
■
•
•■
•
•
❑
■
❑
■
■
■
■
■
■
■
•
•
■
•
•
On Time 
L Move    U Adjust    E Enter     R Return
Timer 1
Off Time
Volume
0000Inactivate
0000Inactivate
10SourceAntennaChannelTVATV0
RepeatOnceSunMonTueWedThuFriSat
Auto Power Off When you set the timer on, the television will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by the timer. This function is only available in timer on mode and prevents overheating, which may occur if a TV is on for too long time.
■
The current time will appear every time you press the INFO button.
■
Depending on the broadcast station and signal, the auto time may not be set correctly. If this occurs, set the time manually.The Antenna or cable must be connected in order to set the time automatically.
■
■
Press the TOOLS button to display the Tools menu. You can also set the sleep timer by selecting Tools → Sleep Timer.
■
Plug & Play
Language : English ▶
Time
Game Mode  : Off
BD Wise  : On
Network Type  : Cable
Network Setup
Child Lock : On
Change PIN
Setup
When there is only one photo file in the USB the Slide Show will not play.
■

BN68-01900M-01Eng.indb   302009-04-13   �� 10:07:21