Samsung LE 32B554 User Manual

							
1
English
Media Play - USB Device

Alternatively 
1 In the File List Section, press the Yellow buttons to select the desired photos.    
2 Press the TOOLS button.            
3 Press the ▲ or ▼ button to select Slide Show, then press the ENTERE button.The selected files will be used for the Slide Show.
Slide Show Option Menu
1 During a slide show (or when viewing a photo), press the TOOLS button to set the option.
2 Press the ▲ or ▼ button to select the desired option, then press the ENTERE button.
OptionDescription
Stop Slide Show /  Start Slide Show
You can start or stop a Slideshow.
Slide Show SpeedYou can select the slide show speed.This function is available only during a slide show.You can also change the speed of the Slide Show by pressing the π (REW) or μ (FF) button during the Slide Show.
■■
RotateYou can rotate photos saved on a USB memory device.Whenever you press the ◄ button, it rotates by 270˚, 180˚, 90˚, and 0˚.Whenever you press the ► button, it rotates by 90˚, 180˚, 270˚, and 0˚. The rotated file is not saved.
■
■
■
ZoomYou can magnify photos saved on a USB memory device. (x1 → x2 → x4)To move the enlarged photo image, press the ENTERE button, then press the ▲/▼/◄/► buttons. Note that when the enlarged picture is smaller than the original screen size, the location change function doesn’t work.The enlarged file is not saved.
■
■
Background MusicYou can select background music when watching a Slide Show.Background Music
Off: Background music is not played.
On: When the background music is available, if you select On, the music is played back. Select Music File (0 File(s) Selected)
Only the selected music file is set as the background music.
■
•
•
■
Picture Setting /  Sound Setting
You can select the picture and sound settings.
InformationThe photo file information is displayed.
Remove SafelyYou can remove the device safely from the TV.
■
To use this feature, there must be music and photo files stored on the USB device.
■
Stop Slide Show
Slide Show Speed  : Normal
RotateZoomBackground MusicPicture SettingSound SettingInformationRemove Safely
U Move     E Enter     e Exit
Tools

[550-UK]BN68-02324J-00Eng.indb   412009-05-25   �� 1:08:53 
						

							

English
Media Play - USB Device

Sorting the Music List
Music List Option Menu
1 Press the MEDIA.P button.           
2 Press the ◄ or ► button to select Music, then press the ENTERE button.     
3 Press the ◄ or ► button to select the desired Music file. Selecting Multiple Music Files
Press the ◄ or ► button to select the desired music file. Then press the Yellow button.
Repeat the above operation to select multiple music files.
The mark c appears to the selected music file.
4 Press the TOOLS button.The option menu changes according to the current status.
OptionDescription
Play Current GroupUsing this menu, you can only play music files in the currently selected sorting group.
Deselect All  (When at least one file is selected)
You can deselect all files.The c mark indicating the corresponding file is selected is hidden.■
InformationThe music file information including the name, the size, the date modified and the path is displayed.You can view the music file information during a Play Current Group using the same procedures.■
Remove SafelyYou can remove the device safely from the TV.
Playing Music
Playing a Music File
1 Press the ▼ button to select the File List Section.       
2 Press the ◄ or ► button to select a music file to be played.      
3 Press the ∂ (Play)/ENTERE button.This menu only shows files with the MP3 file extension. Files with other\
 file extensions are not displayed, even if they are saved on the same US\
B device.The selected file is displayed at the top with its playing time.To adjust the music volume, press the volume button on the remote control\
. To mute the sound, press the MUTE button on the remote control.If the sound is odd when playing MP3 files, adjust the Equalizer and SRS TruSurround HD in the Sound menu. (An over-modulated MP3 file may cause a sound problem.)The playing duration of a music file may be displayed as ‘00:00:00’\
 if its playing time information is not found at the start of the file.π (REW) or μ (FF) buttons do not function during play.
■
•
•
•
■
■
■■
■
■
■
Press the INFO button to viewing the information. ■
SUM  Device  Select   T Tools  R Upper Folder
HaHaHaGoldShineWayWant MeLiesI Love You
Glen HansOnce Ost2007Soundtrack
3/37EnergeticPlay Current GroupInformationRemove Safely
51234
../Music/
E Pause      ◀▶ Previous / Next     T Tools     R ReturnSUM
 I Love YouHaHaHaWay
▶            00:00:04 / 00:04:04                                       3/37

[550-UK]BN68-02324J-00Eng.indb   422009-05-25   �� 1:08:54 
						

							

English
Media Play - USB Device

Music Play Control Buttons
ButtonOperations
ENTEREPlay/Pause the music file.
∂Play the music file
∑Pause the music file
∫Exit play mode and return to the music list.
TOOLSRun various functions from the Music menus.
Music Function Information Icon
pWhen all music files in the folder (or the selected file) are repeated. Repeat Mode is On.
qWhen all music files in the folder (or the selected file) are played once. Repeat Mode is Off.
Playing the Music Group
1 Press the ▲ button to move to the Group List Section.       
2 Select a group using the ◄ and ► buttons.          
3 Press the ∂ (Play) button. The files of the selected group will start playing.   
Alternatively 
1 Select the files In the File List Section, contained the desired group.To move to the previous/next group, press the π (REW) or μ (FF) button.
2 Press the TOOLS button.            
3 Press the ▲ or ▼ button to select Play Current Group, then press the ENTERE button.The music files in the sorting group including the selected file are pla\
yed.
Playing the selected Music Files
1 Press the ▼ button to select the File List Section.       
2 Press the ◄ or ► button to select the desired music file.       
3 Press the Yellow button.       
4 Repeat the above operation to select multiple music files.The c appears to the left of the selected music file.To deselect all selected files, press the TOOLS button and select Deselect All.
5 Press the ∂ (Play)/ENTERE button.The selected files will be played.
Music Play Option Menu
OptionDescription
Repeat ModeYou can play music files repeatedly.
Picture Setting /  Sound Setting
You can configure the picture and sound settings.
InformationThe music file information is displayed.
Remove SafelyYou can remove the device safely from the TV.
■
■
■■
■
Repeat Mode  ◀            On             ▶Picture SettingSound SettingInformationRemove Safely
U Move     L Adjust     e Exit
Tools

[550-UK]BN68-02324J-00Eng.indb   432009-05-25   �� 1:08:54 
						

							

English
Media Play - USB Device
Using the Setup Menu
Setup displays the user settings of the Media Play menu.
1 Press the MEDIA.P button.           
2 Press the ◄ or ► button to select Setup, then press the ENTERE button.    
3 Press the ▲ or ▼ button to select the desired option.       
4 Press the ◄ or ► button to select the option.To exit Media Play mode, press the MEDIA.P button on the remote control.
OptionDescription
Music Repeat ModeSelect to repeatedly play music files.
Screen Saver Run TimeSelect to set the waiting time before the screen saver appears.
InformationSelect to viewing the information of the connected device.
Remove SafelyYou can remove the device safely from the TV.
■
851.86MB/993.02MB Free
Photo
SUM
SUM  Device
SETUP
e ExitMusicSetup
Music Repeat Mode  ◀                  On                ▶
Screen Saver Run Time   :               2 hours
InformationRemove Safely
U Move    L Adjust    R ReturnSUM  Device

[550-UK]BN68-02324J-00Eng.indb   442009-05-25   �� 1:08:54 
						

							

English
Anynet+
Anynet+
Connecting Anynet+ Devices
What is Anynet+?
Anynet+ is a function that enables you to control all connected Samsung devices\
 that support Anynet+ with your Samsung TV’s remote.
The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it.
To connect to a TV
Connect the HDMI IN (1, 2, 3 (DVI) or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable.
To connect to Home Theatre
1 Connect the HDMI IN (1, 2, 3 (DVI) or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable.
2 Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable.Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input on the Home Theatre.When following the connection above, the Optical jack only outputs 2 cha\
nnel audio. You will only hear sound from the Home Theatre’s Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD player or Cable / Satellite Box (ie Anynet Device 1 or 2) directly to the Amplifier or Home Theatre, not the TV.Connect only one Home Theatre.You can connect an Anynet+ device using the HDMI 1.3 cable. Some HDMI cables may not support Anynet+ functions.Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.Anynet+ supports up to 3 devices simultaneously.
■
■
■■■■■
Anynet+ Device 1
HDMI 1.3 CableHDMI 1.3 CableHDMI 1.3 CableHDMI 1.3 Cable
Anynet+ Device 2Anynet+ Device 3Anynet+ Device 4TV
Anynet+ Device 1
HDMI 1.3 Cable
HDMI 1.3 CableHDMI 1.3 CableHDMI 1.3 Cable
TV
HDMI 1.3 Cable
Optical Cable
Anynet+ Device 2Anynet+ Device 3Anynet+ Device 4
Home Theatre

[550-UK]BN68-02324J-00Eng.indb   452009-05-25   �� 1:08:55 
						

							

English
Anynet+

Setting Up Anynet+
OptionDescription
SetupAnynet+ (HDMI-CEC) 
To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.Auto Turn Off 
Setting an Anynet+ Device to turn Off automatically when the TV is turned Off.
The active source on the TV remote must be set to TV to use the Anynet+ function.
If you set Auto Turn Off to Yes, connected external devices are also turned off when the TV is turned off. If an external device is still recording, it may or may not turn off.
■
■
•
•
Switching between Anynet+ 
Devices
1 Press the TOOLS button. Press the ENTERE button to select Anynet+ (HDMI-CEC).
2 Press the ▲ or ▼ button to select Device List, then press the ENTERE button.Anynet+ devices connected to the TV are listed. If you cannot find a device you want, press the red button to scan for devices.
3 Press the ▲ or ▼ button to select to a particular device and press the ENTERE button. It is switched to the selected device.Only when you set Anynet+ (HDMI-CEC) to On in the Application menu, the Device List menu appears.Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching operation.The time required to scan for devices is determined by the number of connected devices.When the device scan is complete, the number of devices found are not displayed.Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected to the TV may not always be automatically displayed in the device list. Press the Red button to sear\
ch for the connected device.If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the Device List.
■
■
■
■
■
■
■
U Move       E Enter       R Return
Anynet+
 (HDMI-CEC)  : On                                  ▶
Setup
Auto Turn Off  : Yes
U Move       E Enter       R Return
View TV
Device List
Recording: DVDRDVDR MENUDVDR INFOReceiver: OffSetup
Press the TOOLS button to display the Tools menu. You can also display Anynet+ menu by selecting Tools → Anynet+ (HDMI-CEC).
■
U Move       E Enter       R Return
Anynet+
 (HDMI-CEC)  : On
Setup
Auto Turn Off  : Yes                               ▶
Media Play (USB)
Anynet+
 (HDMI-CEC) Application

[550-UK]BN68-02324J-00Eng.indb   462009-05-25   �� 1:08:55 
						

							

English
Anynet+

Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
OptionDescription
View TVAnynet+ mode changes to TV broadcast mode.
Device ListShows the Anynet+ device list.
(device_name) MENUShows the connected device menus. 
E.g. If a DVD recorder is connected, the disc menu of the DVD recorder will appear.
(device_name) INFOShows the play menu of the connected device. 
E.g. If a DVD recorder is connected, the play menu of the DVD recorder will appear.
Recording: (*recorder)Starts recording immediately using the recorder. 
(This is only available for devices that support the recording function.)
Stop Recording: (*recorder)Stops recording.
ReceiverSound is played through the receiver.
TV Remote Control Buttons Available in Anynet+ Mode
Device TypeOperating StatusAvailable Buttons
Anynet+ Device
After switching to the device, when the menu of the corresponding device is displayed on the screen.
Numeric buttons
▲/▼/◄/►
ENTERE buttons
Colour buttons
EXIT button
After switching to the device, while playing a file
π(Backward search)
μ(Forward search)
∫(Stop) / ∂(Play)
∑(Pause)
Device with built-in
Tuner
After switching to the device, when you are watching a TV programmeP > / P < button
Audio DeviceWhen Receiver is activatedY / MUTE button
The Anynet+ function only works when the active source on the TV remote control is set to TV.
The ∏ button works only while in the recordable state.
You cannot control Anynet+ devices using the buttons on the TV.  You can control Anynet+ devices only using the TV remote control.
The TV remote control may not work under certain conditions.  If this occurs, reselect the Anynet+ device.
The Anynet+ functions do not operate with other manufacturers’ products.The π, μ operations may differ depending on the device.
■
■
■
■
■■
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is connected, it will be represented as (*device_name).
■

[550-UK]BN68-02324J-00Eng.indb   472009-05-25   �� 1:08:55 
						

							

English
Anynet+

Recording
You can make a recording of a TV programme using a Samsung recorder.
1 Press the TOOLS button. Press the ENTERE button to select  Anynet+ (HDMI-CEC). 
2 Press the ▲ or ▼ button to select Recording Immediately and press the ENTERE button. Recording begins.When there is more than one recording device. When multiple recording devices are connected, the recording devices are\
 listed. Press the ▲ or ▼ button to select a recording device and press the ENTERE button. Recording begins.When the recording device is not displayed select Device List and press the Red button to search devices
3 Press the EXIT button to exit.You can record the source streams by selecting Recording: (device_name).Pressing the ∏ button will record whatever you are currently watching. If you are watching video from another device, the video from the device is recorded.Before recording, check whether the antenna jack is properly connected t\
o the recording device. To properly connect an antenna to a recording device, refer to the recording device’s users manual.
Listening through a Receiver 
(Home Theatre)
You can listen to sound through a receiver instead of the TV speaker.
1 Press the TOOLS button. Press the ENTERE button to select Anynet+ (HDMI-CEC).
2 Press the ▲ or ▼ button to select Receiver. Press the ◄ or ► button to select On or Off.
3 Press the EXIT button to exit.If your receiver supports audio only, it may not appear in the device list.The receiver will work when you have properly connected the optical in j\
ack of the receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV.When the receiver (home theatre) is set to On, you can hear sound outp\
ut from the TV’s Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theatre receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theatre receiver.If there is a power interruption to the TV when the Receiver is set to On (by disconnecting the power cord or a power failure), the Speaker Select may be set to External Speaker when you turn the TV on again. (Refer to Page 28)
■
■
■■
■
■■
■
■
View TVDevice List
Recording: DVDR
DVDR MENUDVDR INFOReceiver: OffSetup
U Move       E Enter       R Return
View TVDevice ListRecording: DVDRDVDR MENUDVDR INFO
Receiver: Off
Setup
U Move       E Enter       R Return

[550-UK]BN68-02324J-00Eng.indb   482009-05-25   �� 1:08:56 
						

							

English
Anynet+

Troubleshooting for Anynet+
Problem Possible Solution
Anynet+ does not work.Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.Connect only one receiver (home theatre).Check if the Anynet+ device power cord is properly connected.Check the Anynet+ device’s Video/Audio/HDMI 1.3 cable connections.Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.Check whether the TV remote control is in TV mode.Check whether it is Anynet+ exclusive remote control.Anynet+ doesn’t work in certain situations. (Searching channels, Operating \
Media Play,  Plug & Play, etc.)When connecting or removing the HDMI 1.3 cable, please make sure to sear\
ch devices again or turn your TV off and on again.Check if the Anynet+ Function of Anynet+ device is set on.
●
●●●●●●●
●
●
I want to start Anynet+.Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu.Press the TV button on the TV remote control to switch to TV. Then press the TOOLS button to show the Anynet+ menu and select a menu you want.
●
●
I want to exit Anynet+.Select View TV in the Anynet+ menu.Press the SOURCE button on the TV remote control and select a device other than Anynet+ devices.Press P >/
						

							
0
English
Other Information

Other Information
Teletext Feature
Most television stations provide written information services via Teletext. The index page of the Teletext service gives you information on how to use the service. In addition, you can select various options t\
o suit your requirements by using the remote control buttons.For Teletext information to be displayed correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed.■
1 5 (reveal)
  Used to display the hidden text (answers to quiz games, for example). \
To display normal 
screen, press it again.2 4 (size)
  Press to display the double-size letters in the upper half of the screen\
. For lower half of the 
screen, press it again. To display normal screen, press it once again.3 8 (store)
  Used to store the Teletext pages.
4 Colour buttons (red/green/yellow/blue)  If the FASTEXT system is used by a broadcasting company, the different topics covered on a Teletext page are colour-coded and can be selected by pressing the coloured buttons. Press one of them corresponding to the required. The page is displayed with other coloured information that can be selected in the same way. To display the previous or next page, press the corresponding coloured button.5 / (Teletext on/mix)
  Press to activate Teletext mode after selecting the channel providing the Teletext service. 
Press it twice to overlap the Teletext with the current broadcasting screen.6 : (exit)
  Exit from the Teletext display.
7 1 (sub-page)
  Used to display the available sub-page.
8 2 (page up)
  Used to display the next Teletext page.
9 3 (page down)
  Used to display the previous Teletext page.
0 0 (mode)
  Press to select the Teletext mode (LIST/ FLOF). If you press it in the LIST mode, it switches 
into the List save mode. In the List save mode, you can save Teletext page into list using the 8(store) button.! 6 (index)
  Used to display the index (contents) page at any time while you are vi\
ewing Teletext.
@ 9 (hold)
  Used to hold the display on a given page if the selected page is linked \
with several 
secondary pages which follow on automatically. To resume, press it again.# 7 (cancel)
  Used to display the broadcast when searching for a page.
The Teletext pages are organized according to six categories:
PartContentsASelected page number.BBroadcasting channel identity.CCurrent page number or search indications.DDate and time.EText.FStatus information.
FASTEXT information.
Teletext information is often divided between several pages displayed in \
sequence, which can be accessed by:
Entering the page number
Selecting a title in a list
Selecting a coloured heading (FASTEXT system)Teletext level supported by the TV is version 2.5 which is capable of displaying additional graphics or text. Depending upon the transmission, blank side panels can occur when displa\
ying Teletext. In these cases, additional graphics or text is not transmitted. Older TV’s which do not support version 2.5 are not capable of displaying any add\
itional graphics or text, regardless of the Teletext transmission.
■
•
•
•■
■■■
You can change Teletext pages by pressing the numeric buttons on the remote control.
■
Press the TV button to exit from the Teletext display.■

[550-UK]BN68-02324J-00Eng.indb   502009-05-25   �� 1:08:56