Samsung LE 26B350 User Manual

							English - 29
Issue Solution
Others
Picture is not shown in full screen. Black bars on each side will be shown on HD channels when displaying upscaled SD 
(4:3) contents.
Black bars on Top & Bottom will be shown on movies that have aspect ratios different 
from your TV.
Adjust picture size option on your external device or TV to full screen.
●
●
●
Remote control does not work. Replace the remote control batteries with correct polarity (+ -).
Clean the transmission window located on the top of the remote.
Try pointing the remote directly at the TV from 5~6 feet away.●
●
●
Can not control TV power or 
volume with Cable/Set top box 
remote control.Programme the Cable/Set top box remote control to operate the TV. Refer to Cable/Sat 
user manual for SAMSUNG TV code.●
‘Not Supported Mode’ message. Check the supported resolution of the TV and adjust the external device’s output 
resolution accordingly. Refer to resolution settings in this manual.●
Plastic smell from TV. This smell is normal and will dissipate over time.●
TV Signal Information is 
unavailable in the Self Diagnostic 
Test menu.This function is only available with digital channels with an Antenna (RF/Coax) 
connection.●
TV is tilted to right or left side. Remove the stand base from TV and reassemble.●
Can not assemble stand base. Make sure TV is placed on flat surface. If can not remove screws from TV, please use 
magnetized screw driver.●
Channel menu is grey out. (unavailable)Channel menu is only available when TV source is selected.●
Your settings are lost after 30 
minutes or every time TV is 
turned off.If TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Please change from Store Demo mode to Home Use mode in the  
Plug & Play procedure. Press the SOURCE button to select TV mode,  
go to MENU → Setup → Plug & Play → ENTERE.
●
Intermittent loss of audio or video. Check cable connections and reconnect. 
Can be caused by using overly rigid or thick cables. Make sure the cables are flexible 
enough for long term use. If wall mounting, we recommend using cables with 90 
degree connectors.●
●
You may see small particles if you 
look closely at the edge of the 
bezel surrounding the TV screen.This is part of the product’s design and is not a defect.●
‘Scramble signal’ or ‘Weak Signal/
No Signal’ with CAM CARD(CI).Check that CAM has CI Card installed into the common interface slot.
Pull out CAM from the TV and insert into the slot again.●
●
When turned off and 45 minutes 
later, TV is turned on itself.It is normal, the TV operate OTA (Over The Air) function itself to upgrade firmware 
downloaded during watching.●
Recurrent picture/sound issue. Check and change signal/source.●
This TFT LCD panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there 
may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.N
 
						

							English - 30
Specifications
Model Name LE26B350 LE32B350
Screen Size 
(Diagonal) 26 inch 32 inch
PC Resolution
(Optimum) 1360 x 768 @ 60Hz 1360 x 768 @ 60Hz
Sound
(Output) 5W X 2 5W X 2
Dimensions WxDxH
Body
With stand665 x 75 x 453 mm
665 x 215 x 496 mm799 x 76 x 530 mm
799 x 218 x 573 mm
Weight
With Stand  7 kg 10 kg
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing
-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing
-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing
Stand Swivel
Left / Right 0˚ 0˚
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
For the power supply and Power Consumption, refer to the label attached to the product.
¦
N
N
N