Samsung LCD TV Lt-P468w User Manual

19
Getting started
Attaching Your TV to the Wall Attachment Panel Bracket
5. Put the four holders on the back of the TV into the holes on the wall bracket Œ, lower the TV ´, and hang the
TV on the bracket. Fasten the TV securely to the wall bracket with stick screws as shown in 
ˇso that the two
will not separate.
Wall BracketWall TV
Œ
´ˇ
BN68-00665D-01_02~21  9/15/04  2:58 AM  Page 19 

Wall Installation Instructions
Adjusting the Angle of the Bracket
How to Adjust the Mounting Angle
20
Getting started
Adjusting the Angle of the Bracket
Factory Default
The Wall Mount Bracket is delivered
separately. Please tighten the Captive
Screw in the direction of the arrow after
assembling the bracket.
Captive screw
Changing the Angle
1
. Attach the TV to the wall bracket. 
(Follow the instructions below.)
2. Pull the upper part of the TV (which has
been attached to the bracket) forward in
the...

Using the Anti-Theft Lock
21
Getting started
Using the Anti-Theft Lock
The Kensington lock is a device used to physically secure the LCD TV when using it in a public place. 
•The LCD TV is designed to use the anti-theft lock.
•The lock device is used to secure the LCD TV when it is used in a public place.
•The appearance and locking method may differ depending on the manufacturer. Please refer to the Owner’s
Instructions provided with the lock for proper use. 
1. Insert the locking device into the...

BN68-00665D-01_22~51  9/1/04  2:34 AM  Page 22  

Connection & Input Source
Setup
Checklist Before Installation ................................ 24
Connecting VHF and UHF Antennas .................... 25
Connecting Cable TV ......................................... 26
Connecting a VCR ............................................. 28
Connecting & Viewing Satellite TV....................... 29
Connecting a DVD Player ................................... 30
Connecting a Digital Set-Top Box (STB) ................ 32
Connecting a Camcorder/Gaming Device...

Checklist Before Installation
24
Connection & Input Source Setup
Checklist Before Installation
1.Please read the Owner’s Manual of the device you are going to connect.
The device may have a different number of terminals and locations depending on
the model.
2.Do not supply power to the device until all connections are complete.
Supplying power in the middle of connecting may cause damage to your product.
3.Make sure that the right (red) and left (white) audio jacks are correctly connected.
4.Check the...

25
Connection & Input Source Setup
Connecting VHF and UHF Antennas
Connecting VHF and UHF Antennas
If your antenna has a set of leads that look like this, see “Antennas with
300-ohm Flat Twin Leads” below.
If your antenna has one lead that looks like this, see “Antennas with 75-
ohm Round Leads” on next page.
If you have two antennas, see “Separate VHF and UHF Antennas” on next
page.
If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has 300-ohm twin flat leads, follow
the...

26
Connection & Input Source Setup
Connecting VHF and UHF Antennas
Connecting VHF and UHF Antennas
Connecting Cable TV
You can connect different cable systems to your TV,
including cable without a cable box, and cable with a
cable box that descrambles some or all channels.
If you have two separate antennas for your TV (one VHF and one UHF), you must  combine the two antenna signals
before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most...

27
Connection & Input Source Setup
Connecting Cable TV
Connecting Cable TV
If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will
need a two-way splitter, an RF (A/B) switch and four lengths of coaxial cable. (These items are available at most
electronics stores.)
After you’ve made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the
“B” position to view scrambled channels. (When you set the A/B...

Connecting a VCR
28
Viewing VCR Playback
Connection & Input Source Setup
Connecting a VCR
1
Connect the antenna cable to the ANTENNA IN
terminal on the back of the VCR.
• Connect either the indoor/outdoor antenna cable, the
CATV antenna cable or the Satellite antenna cable. 3
Connect the audio cable between the [Left
(white) -Audio- Right (red)] terminals on the side
or back of the TV and the [Audio (white/red)
Out] terminals on the VCR.
2
Connect the video cable between the [Video 1
In (yellow)]...