Samsung LCD TV Ln40b550 Specifications

English - 2

Viewing a Slide Show
1. Press the INFO button to display the option View, Start Slide Show, Delete, Delete All, Deselect All.
2. Press the ▲ or ▼ button to select Start Slide Show then press the ENTERE button. 
During the slide show, files are displayed in order from the currently shown file.
MP3 files can be automatically played during the Slide Show if the Default Background Music is set to On. To enable this function, MP3 files and other photo files must be located in the same...

English - 0

Using the Option Menu
1. Complete Steps 1 to 3 of ‘Using the Media Play (USB) Function’. (Refer to page 27)
2. 
Press the ◄ or ► button to move to Photo, then press the ENTERE button. The saved file information is displayed as a folder or file.
. 
Press the ▲, ▼, ◄ and ► button to select a file, then press the ENTERE button. Pressing the button over a photo thumbnail displays the photo in full screen.
4. 
Press the INFO button to display the option (Start Slide Show, Zoom, Rotate,...

English - 1

Repeat Music
Select to repeatedly play MP3 files in the current folder.
You can select On or Off.
Delete
Select a MP3 files to delete. Press the ▲ or ▼ button to select Delete, then press the ENTERE button.
While removing files, don’t remove the USB memory device.
You cannot recover deleted music files.
Delete All
You can delete all files.
Deselect all
You can deselect all files.
Music function information icon
All: When all music files in the folder (or the selected file) are...

English - 2

ANYNET+
Connecting Anynet+ Devices
Anynet+ is a function that enables you to control all connected Samsung devices\
 that support Anynet+ with your Samsung TV’s remote.
The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it.
To connect to a TV
1. Connect the HDMI IN (1, 2,  or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an...

English - 

Setting Up Anynet+
Press the TOOLS button to display the Tools menu. You can also display Anynet+ menu by selecting Tools	→	Anynet+ 
(HDMI-CEC).
Setup
Anynet+ (HDMI-CEC)	→	Off	/	On
To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.
Auto	Turn	Off	→	No	/	 Yes
Setting an Anynet+ Device to turn Off Automatically when the TV is Turned Off
The active source on the TV...

English - 4

Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet+ MenuDescription
View TVAnynet+ mode changes to TV broadcast mode.
Device ListShows the Anynet+ device list.
(device_name) Menu Shows the connected device menus. E.g. If a DVD recorder is connected, t\
he disc menu of the DVD recorder will appear.
(device_name) OperationShows the play menu of the connected device. E.g. If a DVD recorder is c\
onnected, the play menu...

English - 

Listening through a Receiver (Home theater)
You can listen to sound through a receiver instead of the TV speaker.1. 
Press the TOOLS button. Press the ENTERE button to select Anynet+ (HDMI-CEC).
2. 
Press the ▲ or ▼ button to select Receiver. Press the ◄ or ► button to select On or Off.
. 
Press the EXIT button to exit.
If your receiver supports audio only, it may not appear in the device list.
The receiver will work when you have properly connected the optical in j\
ack of...

English - 6

APPENDIX
Troubleshooting
If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, please visit Samsung.com or contact the Samsung call center at 1-800-SAM\
SUNG (726-7864).
ProblemPossible Solution
Poor picture.Try another channel. / Adjust the antenna. / Check all wire connections.
Poor sound quality.Try another channel. / Adjust the antenna.
No picture or sound.Try another channel. / Press the SOURCE...

English - 7

ProblemPossible Solution
The picture appears distorted in the corner of the screen.If Screen Fit is selected with some external devices, the picture may appear distorte\
d in the corner of the screen. This symptom is caused by the external devices, not TV.
The ‘Resets all settings to the default values.’ message appears.This appears when you press and hold the EXIT button for a while. The product settings are reset to the factory defaults.
This TFT LCD panel uses a panel consisting of...

English - 8

Wall	Mount	Kit	Specifications	(VESA)
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
Standard dimensions for wall mount kits are shown in the table above.
When purchasing our wall mount kit, a detailed installation manual and a\
ll parts necessary for assembly are provided.
Do not use screws...