Samsung LCD Monitor SyncMaster 400TSn-2 Specifications

							 
 
 1. Click Settings of the main icons and the Settings Control screen appears.
Info Grid shows some basic information necessary to Settings Control. When each function is selected, the set value 
of the selected function is displayed in the slide. When selected, each function fetches the value for the set and 
displays it on the slide bar. When Select All is chosen, the default value is displayed. Changing a value in this 
screen will automatically change the mode to CUSTOM. 
1) Picture PC 
- Available only for PC, BNC, DVI.
2) Contrast 
-
Adjusts Contrast of the selected display. 
3) Brightness 
-
Adjusts Brightness for the selected display. 
4) Red 
-
Adjusts red Color of the selected display. 
- Available  only for NT. 
5) Green  
-
Adjusts green Color of the selected display. 
- Available  only for NT. 
6) Blue  
-
Adjusts blue Color of the selected display. 
- Available  only for NT. 
7) Color Tone  
-
Adjusts the Color Tone for the selected display. 
8) Color Temp  
-
Adjusts the Color Temp for the selected display. 
9) Brightness Sensor  
-
Adjusts the Brightness Sensor for the selected display. 
10) Dynamic Contrast 
-
Adjusts the Dynamic Contrast for the selected display. 
The Input source of MagicInfo works only on MagicInfo model. 
The Input source of TV works only on TV model. 
Color Temp is only enabled if the Color Tone is set to Off.
This feature is available only for the displays whose power status is ON and if no selection is made, the 
factory default is displayed. 
						

							 
 
 
 Settings  
 
Audio 
1. Click Settings of the main icons and the Settings Control screen appears.
Info Grid shows some basic information necessary to Settings Control. When each function is selected, the set value 
of the selected function is displayed in the slide. When selected, each function fetches the value for the set and 
displays it on the slide bar. When Select All is chosen, the default value is displayed. Changing a value in this 
screen will automatically change the mode to CUSTOM.
1) Audio 
- Controls audio settings for all input sources.
2) Bass 
-
Adjusts Bass of the selected display. 
3) Treble 
-
Adjusts Treble of the selected display. 
4) Balance 
-
Adjusts Balance of the selected display. 
5) SRS TS XT 
- SRS TS XT Sound ON/OFF of the selected display.
6) Sound Select 
- Select either Main or Sub when PIP is On.
The Input source of MagicInfo works only on MagicInfo model. 
The Input source of TV works only on TV model. 
This feature is available only for the displays whose power status is ON and if no selection is made, the 
factory default is displayed.
 Settings  
 
Image Lock 
1. Click Settings of the main icons and the Settings Control screen appears. 
						

							 
Info Grid shows some basic information necessary to Settings Control. 
1) Image Lock  
- Available only for PC, BNC.
2) Coarse 
- Adjusts Coarse of the selected display.
3) Fine 
- Adjusts Fine of the selected display.
4) Position 
- Adjusts Position of the selected display.
5) Auto Adjustment 
- Self-Adjust to the incoming PC signal.
The Input source of MagicInfo works only on MagicInfo model. 
The Input source of TV works only on TV model. 
Settings Control is available only for the displays for which the power status is ON.
 Maintenance  
 
Lamp Control 
1. Click on the Maintenance icon in the Main Icon column to display the Maintenance screen. 
						

							 
 
An Info Grid showing several basic data items appears. 
1) Maintenance 
-
Allows the Maintenance Control function for all input sources. 
2) Auto Lamp Control 
- Automatically adjusts the backlight of the selected display at a specified time.  
The Manual Lamp Control automatically turns off if you adjust using the Auto Lamp Control. 
3) Manual Lamp Control 
- Allows you to adjust the backlight of the selected display regardless of the time.  
The Auto Lamp Control automatically turns off if you adjust using the Manual Lamp Control. 
The Maintenance Control feature is available only for the displays whose power status is ON.
The Input source of MagicInfo works only on MagicInfo model. 
The Input source of TV works only on TV model. 
 Maintenance  
 
Scroll 
1. Click on the Maintenance icon in the Main Icon column to display the Maintenance screen.
  
						

							 
 
 
1) Scroll 
- This function is used to remove the afterimages that occur when a still screen is displayed on the selected 
display  
for  a  long time.  
2) Pixel Shift 
- This allows the screen to be moved finely at the specified time interval.
3) Safety Screen 
- The Safety Screen function is used to prevent afterimages from occurring when a still screen is displayed on the 
monitor for a long time.  The Interval item is used to set the repetition cycle in hour units and the Time item is 
used to set the time when the Safety Screen function must be performed.  
The Type item can be set to Scroll, Pixel, Bar, Eraser, All White, or Pattern.  
4) Safety Screen2 
- This function is used to prevent afterimages from occurring. There are five (5) types that you can select and 
control with this function. 
For the Scroll type, the Time item can be set to 1, 2, 3, 4 or 5. For the Bar and Eraser types, it can be set 
to 10, 20, 30, 40 or 50. For the All White and Pattern type, it can be set to 1, 5, 10, 20 or 30.  
The Input source of MagicInfo works only on MagicInfo model. 
The Input source of TV works only on TV model. 
The Maintenance Control feature is available only for the displays whose power status is ON.
 Maintenance  
 
Video Wall 
1. Click on the Maintenance icon in the Main Icon column to display the Maintenance screen. 
						

							 
 
 
 
 
1) Video Wall  
- A Video Wall is a set of video screens that are connected together, so that each screen shows a part of the whole 
picture or so that the same picture is repeated on each screen.
2) Video Wall (Screen divider) 
- The screen can be divided into. 
You can select a number of screens with a different layout when dividing. 
zSelect a mode from Screen divider. zSelect a display from Display Selection. zThe place will be set up by pressing a number in the selected mode.  zThe MDC program supplied by Samsung supports up to 5x5 LCD Displayes.
3) On / Off  
-
Turns on/off the Video Wall function of the selected display. 
4) Format 
-
The format can be selected to see a divided screen. 
zFull 
zNatural  
You may not operate this function in MagicInfo.
The Input source of TV works only on TV model. 
The Maintenance Control function is available only for the displays where the power status is ON.
Troubleshooting 
 
1.
The display you wish to control does not appear on the Power Control Info Grid 
- Check the connection of RS232C. (Check if it is properly connected to the Com1 port) 
						

							 
 
 
 
 
  - Check the displays to see if any of the other displays connected have the same ID. If more than one displays have 
the same ID, those displays are not properly detected by the program due to data conflict.
- Check if the Display Set ID is a number between 0 and 25. (Adjust using the Display menu)  
Note :A Display Set ID must be a value between 0 and 25 . 
2. The display you wish to control does not appear on the other Control Info Grids 
- Check to see if the display power is ON. (You can check this in Power Control Info Grid)
- Check if you can change the input source of the display. 
3. The dialogue box appears repeatedly. 
- Check to see if the display you wish to control is selected. 
4. Both On Timer and Off Timer have been set but different time is showing.  
- Apply current time to synchronize the display clocks.
5. The remote may not function properly when you turn off the remote Function, disconnect the RS-232C cable, or exit 
the program in an Irregular manner. Rerun the program and turn the remote function again to Restore normal 
fu nc tion s. 
 
This program may malfunction due to problems in communication circuits or interference from electronic 
appliances nearby.
Settings Value Display In Multiple Display Mode 
 
 
 
When there are more than one displays connected, the settings values are displayed as follows.
1. No selection: Displays the Factory Default Value.
2. Selected one display: Fetches and displays the settings value for the selected display.
3. Selected one display (ID1) and add another display (ID3): The program, which was displaying the settings value of 
ID 1, fetches and displays the value of ID3.
4. Selected all sets using Select All: Returns to the Factory Default Value.