Samsung Ht Z310 User Manual

							

EnG

●  PLayBaCK

PLayinG mEDia fiLES USinG tHE USB HOSt fEatUrE
You can enjoy media fi les such as pictures, movies and music saved on an MP3 player (except iPod), USB memory stick 
or digital camera in high quality video with 5.1 channel Home Theater sound by connecting the storage device to the 
USB port of the Home Theater.
Connect the USB device to the USB port on the front 
of the unit.
Press the fUnCtiOn button on the DVD Player or the 
POrt button on the remote control to select the USB 
mode.
USB appears on the display screen and then 
disappears.
The USB MENU screen appears on the TV screen 
and the saved fi le is played.
To stop playback, press the StOP (T) button.
To prevent damage to the memory stored in the USB device, 
perform safe removal before disconnecting the USB cable.
Press the StOP (T) button twice in a row.
The display will show rEmOVE USB.
Remove the USB cable.
 To listen to your music fi les with 5.1 channel home theater sound, you must set the Dolby 
Pro Logic II mode to Matrix. (See page 60)
 In USB mode, you are not enabled to change the resolution or use the SETUP menu if there is 
 no USB device connected to the USB port.
Skip forward/Back 
 During playback, press the [,] button.
When there is more than one fi le and you press the ] 
button, the next fi le is selected.
When there is more than one fi le and you press the [ 
button, the previous fi le is selected.
1.
2.
~
~
.
~
~
M`
`
~
~
AUX IN 1
 Safe POrt removal

Ht-Z310_XAA(ENG)_0201.indd   492008-02-01   �� 3:02:34 
						

							
playback
50
fast playback 
During playback, press the (,) button.
Each time you press either button, the playback speed 
will change as follows: 
2x ➞ 4x ➞ 8x ➞ 32x ➞ normal.
Compatible Devices 
USB devices that support USB Mass Storage v1.0. (USB devices that operate as a removable disc  
in Windows (2000 or later) without additional driver installation.)
MP3 Player: HDD and fl ash type MP3 players.
Digital camera: Cameras that support USB Mass Storage v1.0.
Cameras that operate as a removable disc in Windows (2000 or later) without additional driver installation.
USB HDD and USB Flash Drive: Devices that support USB2.0 or USB1.1.
You may experience a difference in playback quality when you connect a USB1.1 device.
For a USB HDD, make sure to connect an auxiliary power cord to the USB HDD for proper operation.
5.  USB card Reader: One slot USB card reader and Multi slot USB card reader.
Depending on the manufacturer. the USB card reader may not be supported.
If you install multiple memory devices into a multi card reader, you may experience problems.
.  If you use a USB extension cable, the USB device might not be recognized.
Supported formats
formatfile namefile 
extensionBit rateVersionPixelSampling
Frequency
Still PictureJPGJPG  .JPEG––640x480–
musicMP3.MP380~384kbps––44.1kHz
WMA.WMA56~128kbpsV8–44.1kHz
movie
WMV.WMV4MbpsV1,V2,V3,V7720x48044.1KHz~48KHz
DivX.AVI,.ASF4MbpsDivX3.11~
DivX5.1, XviD720x48044.1KHz~48KHz
CBI (Control/Bulk/Interrupt) is not supported.Digital Cameras that use PTP protocol or require additional program installation when connected to a PC are not supported.  A device using NTFS fi le system is not supported. (The system supports only the FAT fi le system and will not play a movie in larger than 1 GB in USB mode.) Some MP3 players, when connected to this product, may not operate depending on the sector size of their fi le system.
The USB host function is not supported if a product that transfers media fi les by its manufacturer-specifi c program is connected.  Does not operate with Janus enabled MTP (Media Transfer Protocol) devices.the USB host function of this product does not support all USB devices. for information onsupported devices, see page 66.
~
1.
2.
.
~
.
~
~
~
~
~~
~
~
~
~~

HT-Z310_XAA(ENG)_0201.indd   502008-02-01   �� 3:02:35 
						

							
51
EnG

●  SyStEm SEtUP
MOVEENTEREXITRETURN
MOVEENTEREXITRETURN
system setup
For your convenience, you can set this DVD Home Theater's features for t\
he best use in your home 
environment. 
MOVEENTEREXITRETURN
MOVESELECTEXITRETURN
SEttinG tHE LanGUaGE
OSD(On-Screen Display) language is set to English by default.
In Stop mode, press the  mEn U button.
Press the Cursor % button to move to Setup and then press the  
E nt Er
 button.
Select Language and then press the  Ent Er button.
Press the Cursor $,% button to select OSD Language and then  
press the  Ent Er button.
Press the Cursor $,% button to select the desired language  
and then press the  Ent Er button.
Once the setup is complete, the OSD will be English if  
English has been selected as language.
d Press the  rEtU rn button to return to the previous level.  
d Press the  EXit button to exit the setup screen.
OSD L anGU aGE  :  
Selecting the OSD Language
a UD iO
 : Selecting the Audio Language (recorded on the disc)
 SUB titLE : Selecting the Subtitle Language (recorded on the disc)
 
DiSC  mEn U :  Selecting the Disc Menu Language (recorded on the disc)
a   
If the language you selected is not recorded on the disc, menu 
     language will not change even if you set it to your desired language.
 
OtHE rS
 : To select another language, select OTHERS and  
  enter the language code of your country. 
 
  AUDIO, SUBTITLE and DISC MENU languages can be
 
                  selected. 
1.
2.
.
.
5.
~
~
~
~
~
~

HT-Z310_XAA(ENG)_0201.indd   512008-02-01   �� 3:02:36 
						

							
52

system setup

SEttinG tV SCrEEn tyPE 
Depending on your TV type (Widescreen or conventional 4:3), you can select the TV's aspect ratio. 
In Stop mode, press the mEn U button.
Press the Cursor % button to move to Setup and then press the  
E nt Er
 button.
Press the Cursor % button to move to  tV D iSPL ay and then  
press the  Ent Er button.
Press the Cursor $,% button to select the desired item  
and then press the  Ent Er button.
Once the setup is complete, you will be taken to the  
previous screen.
d Press the  rEtU rn button to return to the previous level. 
d Press the  EXit button to exit the setup screen.
adjusting the tV aspect ratio (Screen Size)
The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of widescreen and high 
definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different 
screen sizes, you should adjust the aspect ratio to fit your TV or monitor. 
 
For a standard TV, select either 4:3PS or 4:3LB option according to personal preference.  
Select  WiDE/HD tV if you have a widescreen TV.
4:3PS (4:3 Pan&Scan)  
Select this to play a 16:9 picture in the pan & scan mode on a 
conventional TV.
You can see the central portion of the screen only (with the sides of the 
16:9 picture cut off).
4:3LB (4:3 Letterbox)  
Select this to play a 16:9 picture in the letter box mode on a conventional 
TV.
Black bars will appear at the top and bottom of the screen.
W iDE/HD tV 
 
Select this to view a 16:9 picture in the full-screen mode on your 
widescreen TV.
You can enjoy the widescreen aspect.
If a DVD is in the 4:3 ratio, you cannot view it in widescreen.
Since DVD discs are recorded in various image formats, they will look different depending 
on the software, the type of TV, and the TV aspect ratio setting.
When using HDMI, the screen is automatically converted to Wide mode.
1.
2.
.
.
~
~
~
~
M`
`
`
MOVEENTEREXITRETURN
MOVESELECTEXITRETURN

HT-Z310_XAA(ENG)_0201.indd   522008-02-01   �� 3:02:37 
						

							
5
EnG

●  SyStEm SEtUP

SEttinG ParEntaL COntrOLS (ratinG LEVEL)
Use this to restrict playback of adult or violent DVDs you do not want children to view.
In Stop mode, press the  mEn U button.
Press the Cursor % button to move to Setup and then press the  
E nt Er
 button.
Press the Cursor % button to move to  Par Enta L and then press 
the Ent Er button.
Press the Cursor $,% button to select the desired rating level and 
then press the  Ent Er button.
If you have selected Level 6, you cannot view DVDs with Level 7 
or higher.
The higher the level, the closer the content is to violent or adult 
material.
5.    
Enter the password and then press the  Ent Er button.
The password is set to "7890" by default.
Once the setup is complete, you will be taken to the previous screen. 
d Press the  rEtU rn button to return to the previous level.
d Press the  EXit button to exit the setup screen.
This function works only if a DVD disc contains the rating level information. 
SEttinG tHE PaSSWOrD
You can set the password for the Parental (rating level) setting.
In Stop mode, press the  mEn U button.
Press the Cursor % button to move to Setup and then press the  
E nt Er
 button.
Press the Cursor % button to move to  PaSSWO rD and then  
press the  Ent Er button.
Press the  Ent Er button.
Enter the password and then press the  Ent Er button.
Enter the old password, a new password, and confirm new 
password.
The setting is complete.  
The password is set to "7890" by default.
if you have forgotten the rating level password, do the following
While the player is in No DIsc mode, hold the DVD Players  StOP (T) button for longer than  
5 seconds.  initiaL appears on the display and all settings will return to the default values.
Press the  POWEr button.
Using the RESET function will erase all stored settings. 
Do not use this unless necessary.
1.
2.
.
.
~
~
~
~
M`
1.
2.
.
.
5.
~
~
M`
~
~
MOVEENTEREXITRETURN
MOVESELECTEXITRETURN
MOVESELECTEXITRETURN
MOVEENTEREXITRETURN

HT-Z310_XAA(ENG)_0201.indd   532008-02-01   �� 3:02:37 
						

							
5

system setup

SEttinG tHE WaLLPaPEr
 dG
While watching a DVD or JPEG CD, you can set the image you like as background wallpaper.
During playback, press the PaUSE button when 
an image you like appears.
Press the LOGO button.
COPy LOGO Data will be displayed on the TV screen.
The power will turn off and then back on.
The selected wallpaper will be displayed. 
You can select up to 3 wallpaper settings. 
This function will not work when the HDMI output is 720p, 1080i or 1080p.
tO SELECt OnE Of tHE 3 WaLLPaPEr SEttinGS yOU'VE maDE
In Stop mode, press the mEnU button.
Press the Cursor % button to move to Setup and then 
press the EntEr button.
Press the Cursor % button to move to LOGO and then 
press the EntEr button.
Press the Cursor $,% button to select the desired USEr, 
and then press the EntEr button.
This selects one of the 3 wallpaper screens.
5.   Press the EXit button to exit the setup screen.
OriGinaL : Select this to set the Samsung Logo image as 
                     your wallpaper.
USEr : Select this to set the desired image as your
             wallpaper. 
d Press the rEtUrn button to return to the previous level.
d Press the EXit button to exit the setup screen.
1.
2.
~
.
~
~
M`
1.
2.
.
.
~
~
~
COPY LOGO DATA
MOVEENTEREXITRETURN
MOVESELECTEXITRETURN

HT-Z310_XAA(ENG)_0201.indd   542008-02-01   �� 3:02:38 
						

							
55
EnG

●  SyStEm SEtUP

DVD PLayBaCK mODE
Some DVD-Audio discs contain DVD-Video as well as DVD-Audio. 
To play back the DVD-Video portion of the DVD-Audio disc, set the unit 
to DVD-Video mode.
Press the  mEn U button while the disc tray is open.
Press the Cursor % button to move to Setup and then press the 
E nt Er
 button.
Press the Cursor % button to move to  DVD tyPE  and then press   
the Ent Er button.
Press the Cursor $,% button to move to  DVD ViDEO and then 
press the  Ent Er button.
Set steps 1 ~ 4 again if you want to switch to DVD AUDIO Play mode.  
DVD V iDEO 
: Set to play the DVD video contents contained on  
                       a DVD audio disc.
DVD  aUD iO  : Set to play the default DVD audio.
DVD Play mode is set to DVD Audio as factory default setting.
Powering off the main unit will automatically switch to the DVD Audio mode.
DviX (r) registration
Please use the Registration code to register this player with the DivX (R) video on demand format. 
To learn more, go to www.divx.com/vod.
SEttinG tHE SPEaKEr mODE
 
Signal outputs and frequency responses from the speakers will automatically be adjusted according to 
your speaker configuration and whether certain speakers are used or not.
In Stop mode, press the  mEn U button.
Press the Cursor % button to move to  audio and then press the 
E nt Er
 button.
In the  SPEaKE r SE tUP, press the  Ent Er button again.
Press the Cursor ,,, button to move to the desired speaker 
and then press the  Ent Er button.
For C, SL, and SR, each time the button is pressed, the mode switches 
alternately as follows : SMALL ➞ NONE.
For L and R, the mode is set to SMALL.
S ma LL :   Select this when using the speakers.
n O nE  : Select this when no speaker is connected.
d Press the  rEtU rn button to return to the previous level.
d Press the  EXit button to exit the setup screen.
Depending on PRO LOGIC and STEREO settings, the speaker mode may vary (see page 60).
1.
2.
.
.
~
~
~
M`
`
1.
2.
.
.
~
~
~
~
M`
MOVEENTEREXITRETURN
MOVEENTEREXITRETURN
MOVEENTEREXITRETURN
MOVECHANGEEXITRETURN

HT-Z310_XAA(ENG)_0201.indd   552008-02-01   �� 3:02:39 
						

							
5

system setup

SEttinG tHE DELay timE
 
If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay 
time of the audio signals from the center and rear speakers.
In Stop mode, press the mEn U button.
Press the Cursor % button to move to  audio and then press the  Ent Er button.
Press the Cursor % button to move to  DELay tim E and then press the  Ent Er button.
Press the Cursor  ,,, button to move to the desired speaker and then press the  Ent Er button.
5.    
Press the Cursor  , to set the Delay time.
You can set the delay time for C between 00 and 05mSEC and for SL and SR between 00 and 15mSEC.
d Press the  rEtU rn button to return to the previous level.
d Press the  EXit button to exit the setup screen.
When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each 
speaker is the same.  
Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can 
adjust this difference by adding a delay effect to the sound of the Center and Rear Speakers.
Setting CE ntEr  SPE aKE r
If the distance of Dc is equal to or longer than the  
distance of Df in the figure, set the mode as 0ms.  
Otherwise, change the setting according to the table.
Distance between  Df and Dc 0.00 inch1 feet, 
1.39 inches
2 feet, 
2.77 inches
3 feet, 
5.73 inches
4 feet, 
7.12 inches
5 feet, 9.29 inches
Delay  time0 ms1 ms2 ms3 ms4 ms5 ms
Setting  rEar  SPE aKE r
If the distance of Dc is equal to or longer than the distance of Df 
in the figure, set the mode as 0ms.  
Otherwise, change the setting according to the table.
Distance between Df and Dc 0.00 inch3 feet, 
5.73 inches
6 feet, 
11.7 inches
10 feet, 
4.80 inches
13 feet, 
10.54 inches
17 feet,
4.27 inches
Delay  time0 ms3 ms6 ms9 ms12 ms15 ms
With  PL  ii (Dolby Pro Logic II), the delay time may be different for each mode.
With AC-3 and DTS, the delay time can be set between 00 and 15mSEC.
The Center channel is only adjustable on 5.1 channel discs.
1.
2.
.
.
~
M`
`
`
Ideal CENTER SPEAKER placement
Df: The distance from FRONT SPEAKERDc: The distance from CENTER SPEAKERDr: The distance from REAR SPEAKER
It is desirable to place all speakers within this circle. Ideal 
 
REAR  SPEAKER placement
Setting up the Speaker Delay  time

HT-Z310_XAA(ENG)_0201.indd   562008-02-01   �� 3:02:40 
						

							
5
EnG

●  SyStEm SEtUP

SEttinG tHE tESt tOnE
Use the Test Tone feature to check the speaker connections.
In Stop mode, press the  mEn U button.
Press the Cursor % button to move to  audio and then press the 
E nt Er
 button.
Press the Cursor % button to move to  tES t t O nE and then press 
the  Ent Er button.
The test tone will be sent to L ➞ C ➞  r  ➞  Sr ➞ SL ➞ SW in 
order.   
If the  Ent Er button is pressed again at this time, the test tone 
will stop.
d Press the  rEtU rn button to return to the previous level.
d Press the  EXit button to exit the setup screen.
 
SEttinG tHE aUDiO
You can adjust the balance and level for each speaker.
In Stop mode, press the  mEn U button.
Press the Cursor % button to move to  audio and then press the 
E nt Er
 button.
Press the Cursor % button to move to  SOUnD ED it and then press 
the Ent Er button.
Press the Cursor , button to select and adjust the desired item. 
Press the Cursor , button to adjust the settings. 
d Press the  rEtU rn button to return to the previous level.
d Press the  EXit button to exit the setup screen.
1.
2.
.
~
1.
2.
.
.MOVEENTEREXITRETURN
MOVECHANGEEXITRETURN
MOVEENTEREXITRETURN
STOPEXIT

HT-Z310_XAA(ENG)_0201.indd   572008-02-01   �� 3:02:40 
						

							
5

system setup

SEttinG tHE aUDiO
Press the SOUnD EDit button and then press the Cursor 
, button.
adjusting front/rear Speaker Balance
You can select between 00, -06, and OFF.
The volume decreases as you move closer to –6.
adjusting Center/rear/Subwoofer Speaker Level
The volume level can be adjusted in steps from +6dB to –6dB.
The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
SEttinG tHE DrC (DynamiC ranGE COmPrESSiOn)
This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby 
Digital sound when watching movies at low volume at night.
In Stop mode, press the mEnU button.
Press the Cursor % button to move to audio and then press 
the EntEr button.
Press the Cursor % button to move to DrC and then press the 
EntEr button.
Press the Cursor , to adjust the DrC.
When the Cursor  button is pressed, the effect is greater, 
and when the Cursor  button is pressed, the effect is 
smaller.
d Press the rEtUrn button to return to the previous level.
d Press the EXit button to exit the setup screen.
`
`
`
`
1.
2.
.
.
~
manually adjusting the Speaker Volume and Balance with the SOUnD EDit Button.
RETURNMOVEENTEREXIT
CHANGEEXITRETURN

HT-Z310_XAA(ENG)_0201.indd   582008-02-01   �� 3:02:42