Samsung Ht Z310 User Manual

1
EnG

●  COnnECtiOnS

Ht-Z310
installing the Cradle Stand 
1.   Insert the stand so that it fi ts into the hole 
as described in the fi gure.
2.   Turn the stand clockwise to lock it.
(Turning it counter-clockwise will loosen
from the hole.)
3.  This is the completion of the stand
      installation.
 
11
22

Speaker Components
SUBWOOFER
(AH81-03848D)
REAR
L (AH81-03848G)
R (AH81-03848N)
CENTER
(AH81-03848F)
FRONT/REAR
(AH81-03465A)
CENTER
(AH81-03469A)
CRADLE STAND/
WALL MOUNT
HOLE...

20

connections

COnnECtinG tHE SPEaKErS (COn't)

55
4.   Use a coin turn the hole cover clock wise 
to fi x it. (Turning it count-clock wise will 
loosen from the hole.)
5.  Use the wall mount hole (bracket) to install
     the speaker on the wall.
 To avoid accident fall and consequent damage to the customer and speaker, make sure 
the speaker is hung safely.
M`
installing the Wall mount
 
1.   Insert the wall mount so that it fi  ts into the 
rear hole of the speaker as in the fi gure....

21
EnG

●  COnnECtiOnS

Speaker Components
How to install the Speaker on the Stand Base
Connect the SPEaKEr with the 
StanD BaSE.
Insert the SCrEW into the hole on the rear 
of the speaker using a screwdriver as shown 
in the illustration.
This is the SPEaKEr successfully 
assembled with the Stand Base.
1.
2.
.
12

SPEAKER
STANDBASE
Ht-tZ312
 Turn the StanD upside-down and connect 
it to the StanD BaSE.
Insert three small SCrEWS into three holes 
marked with arrows using a screwdriver as...

22

connections

Connecting the front, rear, Center and Subwoofer Speakers
   Press down the terminal tab on the back of the speaker. 
  Insert the black wire into the black terminal (–) and the red wire into    
  the red (+) terminal, and then release the tab.
  Connect the connecting plugs to the back of the Home Theater.
Make sure the colors of the speaker terminals match the colors of 
the connecting plugs.
1.
2.
.
~
COnnECtinG tHE SPEaKErS (COn't)
BlackRed
ipodAUX IN 2
Ht-Z310
ipodAUX IN...

2
EnG

●  COnnECtiOnS

COnnECtinG tHE OPtiOnaL WirELESS rECEiVinG amPLifiEr
 Wireless receiving module (SWa-4000)  
ipodAUX IN 2
RESET
WIRELESS RECEIVER MODULE
Rear Speaker (L)Rear Speaker (R)
Subwoofer
Front Speaker (R)Front Speaker (L)
Center Speaker
  
  
Connect the front, center and Subwoofer speakers to the  
DVD Player, referring to pages 22.
    
With the DVD Player turned off, insert the TX card into the 
 
TX Card Connection(WIRELESS) on the back of the main unit.
Hold the TX card so that...

2

connections

 When you have Purchased the Wireless receiving module (SWa-4000)  
Do not insert any other card except the TX card dedicated to the product.   If a different TX card is used, the product may be damaged or the card may not be removed easily.Do not insert the TX card upside down or in the reverse direction.
   Insert the TX card when the DVD Player is turned off. Inserting the card when it is turned  on may cause a problem.If the TX Card is inserted and wireless receiving module...

25
EnG

●  COnnECtiOnS

COnnECtinG tHE ViDEO OUt tO yOUr tV
Choose one of the three methods for connecting to a TV.
ipodAUX IN 2ipod
AUX IN 2
METHOD3(supplied)
METHOD2
METHOD1
mEtHOD 1 : HDmi
Connect the HDMI cable from the HDMI OUT jack on the back of the DVD Home Theater to the HDMI 
IN jack on your TV.
mEtHOD 2 : Component Video
If your television is equipped with Component Video inputs, connect a component video cable(not 
supplied) from the Component Video Output (Pr, Pb and Y) Connectors on the...

2

connections

HDmi auto Detection function
The player's video output will automatically change to HDMI mode when connecting an HDMI cable 
while power is on. For possible HDMI resolutions, see page 27.
HDmi (High Definition  multimedia  interface)
HDMI is an interface that enables the digital transmission of video and audio data with just a single connector. Using HDMI, the DVD Home Theater transmits a digital video and audio signal and displays a vivid picture on a TV having an HDMI input...

2
EnG

●  COnnECtiOnS

HDmi fUnCtiOn
resolution Selection
This function allows the user to select the screen resolution for 
HDMI output.
In Stop mode, press and hold the SD/HD (Standard Defi nition/
High Defi nition) button on the remote control.
Resolutions available for the HDMI output are 480p, 720p, 
1080i/1080p.
SD(Standard Defi nition) resolution is 480p and HD
(High Defi nition) resolution is 720p, 1080i/1080p.
If the TV does not support the confi gured 
resolution, you will not be able to...

2

connections

COnnECtinG an iPod
You can listen to the audio from an iPod through the main unit. For iPod operation with this Home Theater, see 
pages 31 and 48.
ipodAUX IN 2
ipod
Connect the iPod dock connector to the iPod jack on the DVD home theater.
Press the POrt button on the remote control to select iPod input.
You can also use the  fU nCti On button on the main unit. 
The mode switches as follows :  
DVD/CD ➞  D.in ➞ a UX 1 ➞ a UX 2 ➞ USB ➞ OSD iPOD ➞ fm.
 As the cable ports are close...