Samsung Ht X810 User Manual

							
1
ENG

●  CONNECTIONS

HDMI FUNCTION
resolution Selection
This function allows the user to select the screen resolution for HDMI output.
In Stop mode, press and hold the SD/HD (Standard Defi nition/High Defi nition) button on the remote control.
Resolutions available for the HDMI output are 480p, 720p, 1080i/1080p.
SD(Standard Defi nition) resolution is 480p and HD(High Defi nition) resolution is 720p, 1080i/1080p.The default value of HDMI output is 480p.
If the TV does not support the confi gured resolution, you will not be able to see the picture properly.When an HDMI cable is connected, composite and component 
video signals are not output.See your TV owner's manual for more information on how to select 
the TV's Video Input source.
Using Anynet+(HDMI-CEC)
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control. Anynet + can be used by connecting this Home Theater to a SAMSUNG TV using an HDMI Cable. This is only available with SAMSUNG TVs that support Anynet+.
Connect the main unit of the Home Theater to a Samsung TV with an HDMI cable. (See page 19)
Set the Anynet+ function on your TV.(See the TV instruction manual for more information.)
You can operate the Home Theater by using the TV remote control. (Available TV buttons : , , , , , and , buttons,~button)
If you select the TVSet the Anynet+(HDMI-CEC) to On by pressing the Anynet+ button on your TV remote control.• receiver : On : You can listen to audio through the Home Theater.• receiver : Off : You can listen to audio through the TV.
If you select the THEATErSelect THEATEr to connect and set the option of each item below.• View TV :   If Anynet+(HDMI CEC) is set to on and you select View TV,                       the home theater will automatically switch to digital in mode.• Theater Menu : you can access and control the Home theater menu.• Theater Operation : The Home Theater disc playback                                      information will be displayed. You can                                     control the Disc operation of the                                      Home Theater such as title, chapter                                      and subtitle change.• receiver : On : You can listen to audio through the Home Theater.• receiver : Off : You can listen to audio through the TV.
If you chose 'View TV' and you want to listen to TV sound through Digital In of the Home theater, you have to connect an optical cable between the TV and the Home Theater.
~
~
M`
`
`
1.
.
~
M`
Why use HDMI (High Defi nition Multimedia Interface)? 
This device transmits a DVD video signal digitally without the process of converting to analog. You will get sharper digital pictures when using an HDMI connection.
MoveEnterExit
SetupConnected to PlayerOff  On   
View TVTHEATER
THEATER Menu
MOVEENTErEXIT
MOVEENTErEXITMoveEnterExit
SetupConnected to PlayerOff  On   
View TVTHEATER
THEATER Menu
MOVEENTErEXIT
With Anynet+
You can operate this unit, power on your TV, or watch a movie by pressing the Play button on your Samsung TV's remote control.

HT-X810_XAA_0327.indd   212008-03-27   �� 5:10:38 
						

							


connections

CONNECTING AUDIO FrOM EXTErNAl COMPONENTS
AUX1 : Connecting an External Component/MP3 player
Components such as an MP3 Player
     Connect AUX IN 1 (Audio) on the Home Theater to the Audio Out of the external component/MP3 
player.
Press the AUX button on the remote control to select AUX1 input.
You can also use the FUNCTION button on the main unit.
The mode switches as follows : 
DVD/CD  D.IN  AUX 1  AUX 2  USB  BT AUDIO  FM.
1.
.
~
Audio Cable(not supplied)
Audio OUT

HT-X810_XAA_0327.indd   222008-03-27   �� 5:10:39 
						

							

ENG

●  CONNECTIONS

HDMI OUT
HDMI OUT

AUX2 : Connecting an External Analog Component
Analog signal components such as a VCR.
    Connect AUX IN 2 (Audio) on the Home Theater to the Audio Out of the external analog component.
 Be sure to match connector colors.
 Press the AUX button on the remote control to select AUX 2 input. 
You can also use the FUNCTION button on the main unit.
The mode switches as follows : 
DVD/CD  D.IN  AUX 1  AUX 2  USB  BT AUDIO  FM.
  You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR 
to this product.
OPTICAl : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
      Connect the Digital Input (OPTICAL) on the Home Theater to the Digital Output of the external digital 
component.
Press the AUX button on the remote control to select DIGITAl IN.
You can also use the FUNCTION button on the main unit.
The mode switches as follows : 
DVD/CD  D.IN  AUX 1  AUX 2  USB  BT AUDIO  FM.
1.
~
.
~
M`
1.
.
~
Audio Cable (not supplied)If the external analog component has only one Audio Out, connect either left or right.
Optical Cable(not supplied)
AUX2 : rear PanelOPTICAl : rear Panel
External Analog ComponentExternal Digital Component

HT-X810_XAA_0327.indd   232008-03-27   �� 5:10:41 
						

							


connections
CONNECTING   THE  FM A NTENNA
      Connect the FM antenna supplied to the FM 75Ω COAXIAL Jack.
   
 
Slowly move the antenna wire around until you find a location where reception is good, then fasten it 
to a wall or other rigid surface.
   This unit does not receive AM broadcasts.
1.
.
M`
HDMI OUT
FM Antenna
(supplied)

HT-X810_XAA_0327.indd   242008-03-27   �� 5:10:43 
						

							
5
ENG

●  BEFOrE USING YOUr HOME THEATEr
before using your home theater
The DVD Home Theater's remote can be used to control Samsung TVs.
Plug the main unit's power cord into the AC power supply.
Press the DVD rECEIVEr button to switch to DVD 
RECEIVER mode to operate the DVD Home Theater.
 
Press the FUNCTION button on the main unit or DVD button 
on the remote to enable DVD/CD playback.
Press the TV button to set the remote to TV mode.
Press the POWEr button to turn on your Samsung TV
 with this remote. 
Press the TV/VIDEO button to select VIDEO mode 
on your TV. 
1.
.
.
.
5.
.VIDEO

HT-X810_XAA_0327.indd   252008-03-27   �� 5:10:44 
						

							


playback
DISC PlAYBACK
 B
Press the EJECT () button to open the Disc Slot cover.
 Load a disc vertically into the Disc Insert Hole.
Place a disc gently into the tray with the disc’s label 
facing up.
Close the compartment by pressing the PlAY () button.
Playback starts automatically.
To stop playback, press the STOP () button during playback.
 If pressed once, PrESS PlAY is displayed and the stop position will be stored in memory.    
If the PlAY () button or ENTEr button is pressed, playback resumes from the stop position. 
(This function works only with DVDs.)
 If pressed twice, STOP is displayed, and if the PlAY () button is pressed, playback starts from the 
beginning.
To temporarily pause playback, press the PAUSE () button during playback.
 To resume playback, press the PlAY () button.
Depending on the content of the disc, the initial screen may appear different.
Pirated discs will not run in this player because it violates the CSS (Content Scrambling System : a copy protection system) recommendations.
Do not put force on or pull out the door. This may cause damage to the door.
1.
.
~
.
~
~
~
~
M`
`
`

HT-X810_XAA_0327.indd   262008-03-27   �� 5:10:46 
						

							

ENG

●  PlAYBACK
MP3/WMA-CD PlAYBACK
Data CDs (CD-R, CD-RW) encoded in MP3/WMA format can be played.
A
Load an MP3/WMA disc.
The MP3/WMA menu screen will appear and 
playback will start.
The appearance of the menu depends on the 
MP3/WMA disc.
 WMA-DRM fi les cannot be played.
In Stop mode, use the Cursor ,,, button 
to select the album, and then press the ENTEr button.
Use the Cursor , button to select the track.
To change the album, use the Cursor ,,, 
button to select another album in Stop mode, and then 
press the ENTEr button.
Press the STOP (@) button to stop playback.
Depending on the recording mode, some MP3/WMA-CDs may not play.
Table of contents of a MP3-CD varies depending on the MP3/WMA track format recorded on the disc.
Press the Cursor ,,, button when it is in Stop mode and select a desired icon from 
the top part of the menu.
Music File Icon : To play music fi les only, select the  Icon.
Image File Icon : To view image fi les only, select the  Icon.
Movie File Icon : To view movie fi les only, select the  Icon.
All File Icon : To view all fi les, select the  Icon.
1.
~
~
~
.
~
.
.
M`
`
~
To play a fi le icon in the screen,

HT-X810_XAA_0327.indd   272008-03-27   �� 5:10:47 
						

							


playback

JPEG FIlE PlAYBACK
Images captured with a digital camera or camcorder, or JPEG fi les on a PC can be stored on a CD and then played back 
with this Home Theater.
rotate/Flip Function G
Press the Cursor ,,, button during playback.
The maximum resolutions supported by this product are 5120 x 3480 (or 19.0 MPixel) for 
standard JPEG fi les and 2048 x 1536 (or 3.0 MPixel) for progressive image fi les. 
If a JPEG fi le is played when the HDMI output resolution is 720p/1080i/1080p, the mode is 
automatically converted to 480p mode.
M`
`
button: Rotate 90° Clockwisebutton: Rotate 90° Counterclockwise
button: Flip Vertically
button: Flip Horizontally
Original Image
ENTER SELECT

HT-X810_XAA_0327.indd   282008-03-27   �� 5:10:49 
						

							

ENG

●  PlAYBACK

DIVX PlAYBACK
The functions on this page apply to DivX disc playback.
Skip Forward/Back D
During playback, press the [,] button. 
Goes to the next fi le whenever you press the ] button, if there are over 2 fi les in the disc. 
Goes to the previous fi le whenever you press the 
[ button, if there are over 2 fi les in the disc.
Fast Playback D
During playback, press the (,) button.To play back the disc at a faster speed, press the ( or ) button during playback. 
Each time you press either button, the playback speed will change as follows: 
2x  4x  8x  32x  Normal.
5 Minutes Skip function D
During playback, press the Cursor , button.
Playback skips 5 minutes forward whenever you press the Cursor  button.
Playback skips 5 minutes back whenever you press the Cursor  button.
Audio Display D
Press the AUDIO button.
If there are multiple audio tracks on a disc, you can toggle between them.
Each time you press the button, your selection will toggle 
between AUDIO (1/N, 2/N ...) and .
 is displayed when there is only one supported language in the disc.
Subtitle Display D
 Press the SUBTITlE button.
Each time you press the button, your selection will toggle 
between SUBTITlE (1/N, 2/N ...) and SUBTITlE OFF.
If the disc has only one subtitle fi le, it will be played automatically.
See number 2 (Caption Function) below for more details 
concerning Subtitle usage with DivX discs.
~
~
~
~
~
~
~
M`
~
~
~

HT-X810_XAA_0327.indd   292008-03-27   �� 5:10:51 
						

							
0

playback

DIVX PlAYBACK (CON'T)
If the Disc has more than One Subtitle File D
If the disc has more than one subtitle fi le, the default 
subtitle may not match the movie and you will have 
to select your subtitle language as follows:
In Stop mode, press the Cursor , button, select the 
desired subtitle () from the TV screen, and then 
press the ENTEr button.
When you select the desired DivX fi le from the TV 
screen, the movie will be played normally.
DivX(Digital internet video eXpress) 
DivX is a video fi le format developed by Microsoft and is based on MPEG4 compression technology to provide audio and video data over the Internet in real-time. 
MPEG4 is used for video encoding and MP3 for audio encoding so that the users can watch a movie at near DVD-quality video and audio.
 Supported Formats
  This product only supports the following media formats.If both video and audio formats are not 
supported, the user may experience problems such as broken images or no sound.
Supported Video Formats
FormatAVIWMV
Supported VersionsDivX3.11~DivX5.1, XviDV1/V2/V3/V7
Supported Audio Formats
FormatMP3WMAAC3
Bit Rate80~384kbps56~128kbps128~384kbps
Sampling Frequency44.1khz44.1/48khz
Aspect Ratio : Although the default DivX resolution is 640x480 pixels (4:3), this product supports up to 800x600 pixels (16:9). TV screen resolutions higher than 800 will not be supported.When you play a disc whose sampling frequency is higher than 48khz or 320kbps, you may experience shaking on the screen during playback.
 Caption Function
You must have some experience with video extraction and editing in order to use this feature properly.To use the caption function, save the caption fi le (*.smi) in the same fi le name as that of the DivX media fi le (*.avi) within the same folder. Example.   Root   Samsung_007CD1.aviSamsung_007CD1.smiUp to 60 alphanumeric characters or 30 East Asian characters (2 byte characters such as Korean and Chinese) for the fi le name. 
Offi cial DivX® Certifi ed product
Plays all versions of DivX® video (including DivX® 6) with standard playback of DivX® media fi les
1.
.
1.
~
~
.
~
~
~
~
~

HT-X810_XAA_0327.indd   302008-03-27   �� 5:10:52