Samsung Ht X715t User Manual

							
41
ENG

●  PLAYBACK

Using the Disc Menu  
You can use the menus for the audio language, subtitle 
language, profi le, etc. 
DVD menu contents differ from disc to disc.
In Stop mode, press the MENU button.
Press the Cursor $, % button or numeric buttons to move 
to Disc Menu and then press the ENTEr button.
When you select Disc Menu and it is not supported by 
the disc, the "This menu is not supported" message 
appears on the screen.
Press the Cursor $, %, _, + button to select the desired 
item.
Press the ENTEr button.
d Press the EXIT button to exit the setup screen.
The disc menu display may be different depending on the disc.
Using the Title Menu  
For DVDs containing multiple titles, you can view the title of 
each movie. Depending on the disc, the availability of this 
feature may vary.
In Stop mode, press the MENU button.
Press the Cursor $, % button to move to Title Menu.
Press the ENTEr button.
The title menu appears.
d Press the EXIT button to exit the setup screen.
The Title menu display may be different depending on the disc.
1.
.
~
.
4.
M`
1.
.
.
~
M`
ENTERMOVEEXIT
ENTERMOVEEXIT

HT-X715_ELS_ENG_0421.indd   412008-04-23   �� 3:26:51 
						

							
4

playback

USING BLUETOOTH
You can use a Bluetooth device to enjoy music with high quality stereo sound, all without wires!
What is Bluetooth?  
Bluetooth is a new technology that enables Bluetooth-compliant devices to easily interconnect with each other using a short wireless connection.
A Bluetooth device may cause a noise or malfunction, depending on usage.
When a part of the body is in contact with the receiving/transmitting system of the Bluetooth device or the Home Cinema System.
Electrical variation from obstructions caused by a wall, corner or office partitioning.
Electrical interference from same frequency-band devices including medical equipment, microwave oven and wireless LAN.
Pair the Home Cinema System with the Bluetooth device while maintaining a close distance.
The further the distance is between Home Cinema System and Bluetooth device, the worse the quality is. If the distance exceeds the Bluetooth operational range, the connection is lost.
The Home Cinema System only supports Middle Quality SBC data(up to 237kbps@48kHz), and does not support High Quality SBC data([email protected]).
In poor reception-sensitivity areas, the Bluetooth connection may not work properly.
The Home Cinema System has an effective reception range of up to 10 meters in all directions if there are no obstacles. The connection will be automatically cut off if the distance is out of this range. Even 
within this range, the sound quality may be deteriorated by obstacles such as walls or doors.
To connect the Home Cinema System to a Bluetooth device  
Check if the Bluetooth device supports the Bluetooth-compliant stereo headset function. 
Press the FUNCTION button on the front panel of the home cinema system repeatedly until "BT AUDIO" appears.
The mode switches as follows :  DVD/CD  DIGITAL IN  AUX 1  AUX 2  USB  BT AUDIO  TUNE r.
You will see “WAIT” for 2 seconds and then “r EADY” on the front display of the Home Cinema System.
Select the Bluetooth menu on Bluetooth device you want to connect. (refer to Bluetooth device's user manual)
Select the Stereo headset menu on the Bluetooth device.
You will see a list of scanned devices.
Select "Samsung Home Theater" from the searched list.
When the Home Cinema System is connected to the Bluetooth device, the Home Cinema System will display "Connect" on the front display, followed by the device name of the connected Bluetooth device.
The Home Cinema System connection is complete.
Play music on the connected device.
You can listen to the music playing on the connected Bluetooth device over the home cinema system.
You may be required to enter a PIN code(password) when connecting the Bluetooth device to the home cinema system. If the PIN code input window appears, enter .
The Home Cinema System may control play related function  only when connected device supports the function.
The Home Cinema System only supports Middle Quality SBC data(up to 237kbps@48kHz), and does not support High Quality SBC data([email protected]).
~
~
~
~
~
~
~
~
~
1.
~
~
.
.
~
4.
~
~
.
~
M`
`
`
Connect
Bluetooth devide

HT-X715_ELS_ENG_0421.indd   422008-04-23   �� 3:26:51 
						

							
4
E N G

●  PLAYBACK

You can disconnect the Home Cinema System from the 
Bluetooth device. (refer to Bluetooth deivice's user's manual)
The Home Cinema System will be disconnected.
When the Home Cinema System is disconnected from the 
Bluetooth device, the Home Cinema System will display 
"Disconnect" on the front display.
Press the FUNCTION button on the front panel of the home cinema system to switch from “BT AUDIO” 
to another mode.
The connected Bluetooth device will wait a certain time for response from the home cinema system 
before terminating the connection. (Disconnection time may differ, depending on the Bluetooth device)
The currently connected device will be disconnected.
In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Home Cinema 
System and the Bluetooth device exceeds (10 meters). If the distance is returned to the effective range or you 
restart the Bluetooth device, the Bluetooth connection can be restored.
With some Bluetooth devices, some functions may not work properly.
~
~
~
~
M`
`
To disconnect the Bluetooth device from the Home Cinema System
To disconnect the Home Cinema System from the Bluetooth device

HT-X715_ELS_ENG_0421.indd   432008-04-23   �� 3:26:51 
						

							
44

playback

PLAYING MEDIA FILES USING THE USB HOST FEATUrE
You can enjoy media fi les such as pictures, movies and music saved on an MP3 player, USB memory stick or digital 
camera in high quality video with 5.1 channel Home Cinema sound by connecting the storage device to the USB 
port of the Home Cinema.
Connect the USB device to the USB port on the side of 
the unit.
Press the FUNCTION button on the DVD Player or the 
POrT button on the remote control to select the USB 
mode.
USB appears on the display screen and then 
disappears.
The USB MENU screen appears on the TV screen 
and the saved fi le is played.
To stop playback, press the STOP (@) button.
Safe USB removal
To prevent damage to the data stored in the USB device, 
perform safe removal before disconnecting the USB cable.
Press the STOP (@) button twice in a row.
The display will show rEMOVE USB.
Remove the USB cable.
  To listen to your music fi les with 5.1 channel home cinema sound, you must set the Dolby Pro Logic II mode 
to Matrix. (See page 56)
Skip Forward/Back 
During playback, press the [, ] button.
When there is more than one fi le and you press the ] 
button, the next fi le is selected.
When there is more than one fi le and you press the [ 
button, the previous fi le is selected.
1.
.
~
~
.
~
~
M`
~
~

HT-X715_ELS_ENG_0421.indd   442008-04-23   �� 3:26:52 
						

							
4
ENG

●  PLAYBACK

Fast playback 
During playback, press the (, ) button.
Each time you press either button, the playback speed will 
change as follows: 
 2x  4x  8x  32x  Normal. 
Compatible Devices 
USB devices that support USB Mass Storage v1.0. (USB devices that operate as a removable disc 
in Windows (2000 or later) without additional driver installation.)
MP3 Player: HDD and fl ash type MP3 players.
Digital camera: Cameras that support USB Mass Storage v1.0.
Cameras that operate as a removable disc in Windows (2000 or later) without additional driver 
installation.
USB HDD and USB Flash Drive: Devices that support USB2.0 or USB1.1.
You may experience a difference in playback quality when you connect a USB1.1 device.
For a USB HDD, make sure to connect an auxiliary power cord to the USB HDD for proper 
operation.
USB card Reader: One slot USB card reader and Multi slot USB card reader.
Depending on the manufacturer. the USB card reader may not be supported.
If you install multiple memory devices into a multi card reader, you may experience problems.
If you use a USB extension cable, the USB device might not be recognized.
Supported Formats
FormatFile nameFile 
extensionBit rateVersionPixelSampling 
Frequency
Still PictureJPGJPG  .JPEG––640x480–
MusicMP3.MP380~384kbps––44.1kHz
WMA.WMA56~128kbpsV8–44.1kHz
Movie
WMV.WMV4MbpsV1,V2,V3,V7720x48044.1KHz~48KHz
DivX.AVI,.ASF4MbpsDivX3.11~
DivX5.1, XviD720x48044.1KHz~48KHz
CBI (Control/Bulk/Interrupt) is not supported.
Digital Cameras that use PTP protocol or require additional program installation when connected to a 
PC are not supported.
  A device using NTFS fi le system is not supported. (Only FAT 16/32 (File Allocation Table 16/32) fi le 
system is supported.)
Some MP3 players, when connected to this product, may not operate depending on the sector size 
of their fi le systems.
The USB host function is not supported if a product that transfers media fi les by its manufacturer-
specifi c program is connected.
  Does not operate with Janus enabled MTP (Media Transfer Protocol) devices.
The USB host function of this product does not support all USB devices. For information on the 
supported devices, see page 65.
~
1.
.
.
~
4.
~
~
.
~
~
.
~
~
~
~
~
~
~

HT-X715_ELS_ENG_0421.indd   452008-04-23   �� 3:26:52 
						

							
4

system setup

For your convenience, you can set this Home Cinema System's features for\
 the 
best use in your home environment.
S ETTING   THE  L ANGUAGE
OSD(On-Screen Display) language is set to English by default.
In Stop mode, press the MENU button.
Press the Cursor % button to move to Setup and then press the  
ENTE
r
 or + button.
Select Language and then press the  ENTE r or + button.
Press the Cursor $,% button to select OSD Language and then  
press the ENTE r or + button.
Press the Cursor $,% button to select the desired language  
and then press the  ENTE r button.
Once the setup is complete, the OSD will be English if  
English has been selected as the language.
d Press the r ETU r N button to return to the previous level. 
d Press the EXIT button to exit the setup screen.
OSD LANGUAGE : Selecting the OSD Language
AUDIO : Selecting the Audio Language (recorded on the disc)
SUBTITLE : Selecting the Subtitle Language (recorded on the disc)
DISC MENU : Selecting the Disc Menu Language (recorded on the disc)
   If the language you selected is not recorded on the disc, menu  
language will not change even if you set it to your desired language.
 
OTHE r S
 : To select another language, select OTHERS and  
 
enter the language code of your country (see page 64). 
 
 
AUDIO, SUBTITLE and DISC MENU languages can be
 
                  selected. 
1.
.
.
4.
.
~
~
~
~
~
~
MOVEENTEREXITRETURN
MOVEENTEREXITRETURN
MOVEENTEREXITRETURN
MOVESELECTEXITRETURN

HT-X715_ELS_ENG_0421.indd   462008-04-23   �� 3:26:53 
						

							
4
E N G

●  SYSTEM   SETUP

SETTING  TV S C r EEN  T YPE  
Depending on your TV type (Wide Screen or conventional 4:3), you can select the TV's aspect ratio. 
In Stop mode, press the MENU button.
Press the Cursor % button to move to Setup and then press the 
ENTE
r
 or + button.
Press the Cursor % button to move to TV DISPLAY and then 
press the  ENTE r or + button.
Press the Cursor $,% button to select the desired item and then 
press the ENTE r button.
Once the setup is complete, you will be taken to the previous 
screen.
d Press the r ETU r N button to return to the previous level.
d Press the EXIT button to exit the setup screen.
Adjusting the TV Aspect  r atio (Screen Size)
The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of widescreen and high 
definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different 
screen sizes, you should adjust the aspect ratio to fit your TV or monitor.
For a standard TV, select either 4:3PS or 4:3LB option according to personal preference.  
Select WIDE/HDTV if you have a widescreen TV.
4:3PS (4:3 Pan&Scan)  
Select this to play a 16:9 picture in the pan & scan mode on a 
conventional TV.
You can see the central portion of the screen only (with the sides of 
the 16:9 picture cut off).
4:3LB (4:3 Letterbox)  
Select this to play a 16:9 picture in the letter box mode on a 
conventional TV.
Black bars will appear at the top and bottom of the screen.
WIDE/HDTV  
Select this to view a 16:9 picture in the full-screen mode on your 
widescreen TV.
You can enjoy the widescreen aspect.
If a DVD is in the 4:3 ratio, you cannot view it in widescreen.
Since DVD discs are recorded in various image formats, they will look different depending on the software, the 
type of TV, and the TV aspect ratio setting.
When using HDMI, the screen is automatically converted to Wide mode.
1.
.
.
4.
~
~
~
~
M`
`
`
MOVEENTEREXITRETURN
MOVESELECTEXITRETURN

HT-X715_ELS_ENG_0421.indd   472008-04-23   �� 3:26:54 
						

							
4

system setup

S ETTING  P A r ENTAL  C ONT r OLS  ( rATING  L EVEL )
Use this to restrict playback of adult or violent DVDs you do not want 
children to view.
In Stop mode, press the MENU button.
Press the Cursor % button to move to Setup and then press the  
ENTE
r or + button.
Press the Cursor % button to move to  PA r ENTAL and then press the ENTE r or + button.
Press the Cursor $,% button to select the desired rating level and then press the ENTE r button.
If you have selected Level 6, you cannot view DVDs with Level 7 or higher.
The higher the level, the closer the content is to violent or adult material.
Enter the password and then press the  ENTE r button.
The password is set to "7890" by default.
Once the setup is complete, you will be taken to the previous screen. 
d Press the r ETU r N button to return to the previous level.
d Press the EXIT button to exit the setup screen.
This function works only if a DVD disc contains rating level information.
SETTING   THE  P ASSWO r D
You can set the password for the Parental (rating level) setting.
In Stop mode, press the MENU button.
Press the Cursor % button to move to Setup and then press the 
ENTE
r or + button.
Press the Cursor % button to move to  PASSWO r D and then press the ENTE r or + button.
Press the ENTE r button.
Enter the password and then press the  ENTE r button.
Enter the old password, a new password, and confirm new password.
The setting is complete.
The password is set to "7890" by default.
If you have forgotten the rating level password, do the following
While the player is in No DIsc mode, hold the DVD Players STOP (@) button for longer than  
5 seconds. INITIAL appears on the display and all settings will return to the default values.
Press the POWE r button. 
 
Using the 
r ESET function will erase all stored settings. 
 
Do not use this unless necessary.
1.
.
.
4.
~
~
.
~
~
M`
1.
.
.
4.
.
~
~
M`
~
~
MOVEENTEREXITRETURN
MOVESELECTEXITRETURN
MOVESELECTEXITRETURN
MOVEENTEREXITRETURN

HT-X715_ELS_ENG_0421.indd   482008-04-23   �� 3:26:54 
						

							
4
ENG

●  SYSTEM SETUP

SETTING THE WALLPAPEr
  G
While watching a DVD or JPEG CD, you can set the image you like as background wallpaper.
During playback, press the PAUSE () button when an 
image you like appears.
Press the LOGO button.
COPY LOGO DATA will be displayed on the TV screen.
The power will turn off and then back on.
The selected wallpaper will be displayed. 
You can select up to 3 wallpaper settings. 
This function will not work when the HDMI output is 720p, 1080i or 1080p.
TO SELECT ONE OF THE 3 WALLPAPEr SETTINGS YOU'VE MADE
In Stop mode, press the MENU button.
Press the Cursor % button to move to Setup and then press the 
ENTEr or + button.
Press the Cursor % button to move to LOGO and then press the 
ENTEr or + button.
Press the Cursor $,% button select the desired USEr, and then 
press the ENTEr button.
This selects one of the 3 wallpaper screens.
Press the EXIT button to exit the setup screen.
OrIGINAL : Select this to set the Samsung Logo image as your    
 wallpaper.
USEr : Select this to set the desired image as your wallpaper.
d Press the rETUrN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
1.
.
~
.
~
~
M`
1.
.
.
4.
~
.
~
~
LOGO IS COPIED# PAUSE
MOVEENTEREXITRETURN
MOVESELECTEXITRETURN
COPY LOGO DATA# PAUSE

HT-X715_ELS_ENG_0421.indd   492008-04-23   �� 3:26:55 
						

							
0

system setup

DVD P LAYBACK  M ODE
Some DVD-Audio discs contain DVD-Video as well as DVD-Audio. 
To play back the DVD-Video portion of the DVD-Audio disc, set the unit 
to DVD-Video mode.
Press the MENU button while the disc tray is open.
Press the Cursor % button to move to Setup and then press the 
ENTE
r
 or + button.
Press the Cursor % button to move to DVD TYPE and then press 
the  ENTE r or + button.
Press the Cursor $,% button to move to DVD VIDEO and then press 
the ENTE r button.
Set steps 1 ~ 4 again if you want to switch to DVD AUDIO Play 
mode.
DVD VIDEO  : Set to play the DVD video contents contained on a    
 
DVD audio disc.
DVD AUDIO : Set to play the default DVD audio.
DVD Play mode is set to DVD Audio as factory default setting.
Powering off the main unit will automatically switch to the DVD Audio mode.
DviX (r )  r egistration
Please use the Registration code to register this player with the DivX (R) video on demand format.  
To learn more, go to www.divx.com/vod.
SETTING   THE  SPEAKE r  MODE
Signal outputs and frequency responses from the speakers will automatically be adjusted according to 
your speaker configuration and whether certain speakers are used or not.
In Stop mode, press the MENU button.
Press the Cursor % button to move to Audio and then press the 
ENTE
r
 or + button.
In the  SPEAKE r  SETUP, press the ENTE r or + button again.
Press the Cursor $, %, _, + button to move to the desired 
speaker and then press the  ENTE r button.
For C, SL, and SR, each time the button is pressed, the mode 
switches alternately as follows : SMALL  NONE.
For L and R, the mode is set to SMALL.
SMALL : Select this when using the speakers.
NONE : Select this when no speaker is connected.
d Press the r ETU r N button to return to the previous level.
d Press the EXIT button to exit the setup screen.
Depending on PRO LOGIC and STEREO settings, the speaker mode may vary (see page 56).
1.
.
.
4.
~
~
~
M`
`
1.
.
.
4.
~
~
~
~
M`
MOVEENTEREXITRETURN
MOVEENTEREXITRETURN
MOVEENTEREXITRETURN
MOVECHANGEEXITRETURN

HT-X715_ELS_ENG_0421.indd   502008-04-23   �� 3:26:55