Samsung Ht X200 Instruction Manual

							ENG
21 20
Connecting the FM Antenna
FM Antenna (supplied)
1Connect the FM antenna supplied to the FM 75ΩCOAXIAL Jack.
2Slowly move the antenna wire around until you find a location where reception is good, then fasten it 
to a wall or other rigid surface.
• This unit does not receive AM broadcasts.
Please observe the following cautions for your safety.
Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit
may rise and may damage it.
Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered
with a newspaper or cloth, heat may build up inside the unit and fire may result.)
The cooling fan supplies cool air to the unit to  prevent overheating.
Cooling Fan
Before Reading the Users Manual
Icons that will be used in manual
Make sure to check the following terms before reading the user manual.
Icon Term Definition
DV D
CD
MP3
JPEG
DivX
CAUTION
NOTEDVD
CD
MP3
JPEG
DivX
This involves a function available with DVD or 
DVD-R/DVD-RW discs that have been recorded and
finalized in Video Mode.
This involves a function available with a data CD
(CD-R or CD-RW).
This involves a function available with CD-R/-RW discs
.
This involves a function available with CD-R/-RW discs.
This involves a function available with MPEG4 discs.
(DVD R/RW, CD-R or CD-RW)
This involves a case where a function does not 
operate or settings may be cancelled.
This involves tips or instructions on the page that
help each function operate.
• In this manual, the instructions marked with DVD (          ) are applicable to DVD-VIDEO, DVD-AUDIO
and DVD-R/-RW discs that have been recorded in Video Mode and then finalized.
Where a particular DVD type is mentioned, it is indicated separately.
• If a DVD-R/-RW disc has not been recorded properly in DVD Video format, it will not be playable.
• Depending on the content of the disc, the initial screen may appear different.DVD
OPERATION
 
						

							ENG
23 22
OPERATION
Before Using Your Home Theater
To Operate your Samsung TV and the Home Theater with the HT-X200s Remote Control
1Plug the main units power cord into the AC power supply.
2Press theTVbutton to set the remote to TV mode.
3Press the POWERbutton to turn on your Samsung TV 
with this remote.
4Press theTV/VIDEObutton to select VIDEO mode on your TV.
5Press the DVD RECEIVERbutton to switch to DVD RECEIVER mode to
operate the DVD Home Theater
6Press the FUNCTIONbutton on the main unit or DVDbutton 
on the remote  to enable DVD playback.
VIDEO
Disc Playback
1Load a disc vertically into the Disc Insert Hole.
Insert a disc so that the label side faces forward.
Playback starts automatically.
2To eject the disc, press the EJECTbutton.
• Depending on the content of the disc, the initial screen may appear different.
• 
Pirated discs will not run in this player because it violates the CSS (Content Scrambling System : a copy protection system)
recommendations.
To stop playback, press the STOP button during playback.
If pressed once,  is displayed and the stop position will be stored in memory.
If the PLAY/PAUSE ( )button or ENTERbutton is pressed, playback resumes from the stop position.
(This function works only with DVDs.)
If pressed twice, is displayed, and if the PLAY/PAUSE ( )button is pressed, playback starts from the 
beginning.
To temporarily pause playback, press the PLAY/PAUSE()button during playback.
To resume playback, press the PLAY/PAUSE ( )button again.
DVDCD
The DVD Home Theaters remote can be used to control Samsung TVs.
ALL
 
						

							ENG
OPERATION
2425
MP3
Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then played
back with this Home Theater.
JPEG File Playback
• The maximum resolutions supported by this product are 5120 x 3480 (or 19.0 MPixel) for
standard JPEG files and 2048 x 1536 (or 3.0 MPixel) for progressive image files.
•  If a JPEG file is played when the HDMI output resolution is 720p/1080i, the mode is
automatically co nve rted to 480p mod e.
Slide Mode
1Press the  DIGESTbutton during playback.
JPEG files will be shown in 9 windows.
2Press the Cursor 
,,,button to select the desired image and
then press the  ENTERbutton.
The selected image is played for 5 seconds before moving to the next image.
To view the previous or next 9 images, press the  button.
Digest Function
You can view 9 JPEG images on the TV screen at once.
Press the Cursor  , , , button 
during playback.
Rotate/Flip Function
button: Flip Vertically
button: Flip Horizontally
button: Rotate 90 °
Counterclockwisebutton: Rotate 90 °
Clockwise
Original Image
JPEGMP3/WMA-CD Playback
1Load the MP3 disc.
The MP3/WMA menu screen will appear and playback will start.The appearance of the menu depends on the MP3/WMA disc.
WMA-DRM files cannot be played.
2In Stop mode, use the Cursor  , , , button to select the album, 
and then press the  ENTERbutton.
Use  the Cursor,button to select the track.
3To change the album, use the Cursor  , , , button to select another
album in Stop mode, and then press the ENTERbutton.
To select another album and track, repeat Steps 2 and 3 above.
4Press the STOP( ) button to stop playback.
To play a file icon in the screen,
Press the Cursor ,,,button when it is in Stop mode and select a desired icon from the top par\
t of the menu.
Data CDs (CD-R, CD-RW) encoded in MP3/WMA format can be played.
Music File Icon :To play music files only, select the  Icon.
Image File Icon :To view image files only, select the  Icon.
Movie File Icon :To view movie files only, select the  Icon.
All File Icon :To view movie files only, select the  Icon.
• Depending on the recording mode, some MP3/WMA-CDs may not play.
•  Table of contents of a MP3-CD varies depending on the MP3/WMA track format
recorded on the disc.
1Load the JPEG disc.Playback starts automatically. Each image is displayed for 5 seconds and then the next
imageis displayed.
2Press the SLIDE MODE button.Each time the button is pressed, the image makes the transition as follows:
SLIDE SHOW MODE : 1~5 ➝SLIDE SHOW MODE : RANDOM ➝SLIDE SHOW MODE : NONE
Press the  button to skip to the next slide.
Each time the button is pressed, the slide moves backward or forward.
 
						

							ENG
OPERATION
27 26
The functions on this page apply to DivX disc playback.
DivX Playback
During playback, press the  , button.
Goes to the next file whenever you press the  button, if there are over 2 files in the disc.
Goes to the previous file whenever you press the  button, if there are over 2 files in the disc.
Skip Forward/Back
During playback, press the Cursor  , button.
Playback skips 5 minutes forward whenever you press the Cursor  button.
Playback skips 5 minutes back whenever you press the Cursor  button.
5 Minute Skip function
To play back the disc at a faster speed, press the  or  button during playback.
Each time you press either button, the playback speed will change as follows:
2x ➝4x ➝8x ➝32x ➝Normal.
Fast Playback
1Press the ZOOMbutton.
Each time you press the button, your selection will toggle between  and
.
2Press the Cursor  , , , button to move to the area you want to enlarge.
Zoom Function
• A DivX file can be zoomed only in ZOOM X2 mode.
• DivX files have .Avi file extensions, however, not all .Avi files are DivX and may not be
playable in this unit.
DivX
Press the AUDIO button.
If there are multiple audio tracks on a disc, you can toggle between them.
Each time you press the button, your selection will toggle between  and         .
Audio Display
•  is displayed when there is one supported language in the disc.
If the disc has more than one subtitle file, the default subtitle may not match the
movie and you will have to select your subtitle language as follows:
1In Stop mode, press the Cursor  , button, select the desired subtitle ( )
from the TV screen, and then press the ENTERbutton.
2When you select the desired DivX file from the TV screen, the movie will be
played normally.
If the Disc has more than One Subtitle File
DivX is a video file format developed by Microsoft and is based on MPEG4 compression technology to provide audio and
video data over the Internet in real-time.
MPEG4 is used for video encoding and MP3 for audio encoding so that the users can watch a movie at near DVD-quality
video and audio.
DivX(Digital internet video eXpress)
1. Supported Formats
This product only supports the following media formats. If both video and audio formats are not supported, the user may
experience problems such as broken images or no sound.
2. Caption Function
• You must have some experience with video extraction and editing in order to use this feature properly.
• To use the caption function, save the caption file (*.smi) in the same file name as that of the DivX media file (*.avi)
within the same folder.
Example. Root Samsung_007CD1.avi
Samsung_007CD1.smi 
• Up to 60 alphanumeric characters or 30 East Asian characters (2 byte characters such as Korean and Chinese) for the
file name.
Format MP3 WMA AC3
Bit Rate 80~384kbps 56~128kbps 128~384kbps
Sampling Frequency44.1khz 44.1/48khz
• Aspect Ratio: Although the default DivX resolution is 640x480 pixels (4:3), this product supports up to 800x600 pixels
(16:9). TV screen resolutions higher than 800 will not be supported.
• When you play a disc whose sampling frequency is higher than 48khz or 320kbps, you may experience shaking on 
the screen during playback. Supported Audio Formats
Press theSUBTITLEbutton.
Each time you press the button, your selection will toggle between 
and .
If the disc has only one subtitle file, it will be played automatically.
See number 2 (Caption Function) below for more details concerning Subtitle usage with DivX
discs.
Subtitle Display
Format AVI WMV
Supported Versions DivX3.11~DivX5.1, XviD V1/V2/V3/V7
Supported Video  Formats
 
						

							ENG
OPERATION
29 28
Using the Playback Function
Press the INFObutton.
Each time the button is pressed, the display changes as follows:
The information
Display disappears
from the screen
The information
Display disappears
from the screen
The information
Display disappears
from the screen
Screen Display
CD display DVD display
TITLE displayELAPSED TIME display
SUBTITLE display
TRACK (FILE) displayAUDIO LANGUAGE display
REPEAT PLAYBACK display
ANGLE display
DOLBY DIGITAL displaySTEREO (L/R) displayCHAPTER display
Displaying Disc Information
You can view disc playback information  on the TV screen.
DVDCDMP3JPEGDivX
DVD
CD
MP3JPEGDivX
• Depending on the disc, the disc information display may appear different.
• Depending on the disc, you can also select DOLBY DIGITAL, or PRO LOGIC.
appears on the TV screen! 
If this symbol appears on the TV screen when pressing a button, that operation is not
possible with the disc currently being played.
DVD-AUDIO displayDVD
AUDIO
Press the REMAINbutton.
For checking the total and remaining time of a title or chapter being played.
Each time the Remain button is pressed 
Checking the Remaining Time
Press the  , button.
Each time the button is pressed during playback, the playback speed changes as follows:
Fast Playback
2X ➝4X ➝8X ➝32X ➝PLAY
2X ➝4X ➝8X ➝32X ➝PLAY
Press the SLOWbutton.
Each time the button is pressed during playback, the playback speed changes as follows:
Slow Playback
• No sound is heard during slow playback.
• Reverse slow playback does not work with DivX.
• During fast playback of a CD or MP3-CD, sound is heard only at 2x speed, and not at 4x,
8x, and 32x speeds.
1/2 ➝1/4 ➝1/8 ➝1/2 ➝1/4 ➝1/8 ➝PLAY
1/2 ➝1/4 ➝1/8 ➝PLAY
DVDCDMP3
DVDCDMP3DivX
DVDDivX
DVD
DivX
GROUP display
DVD-VIDEO
DVD-AUDIO
CD
MP3
TITLE ELAPSED ➝TITLE REMAIN ➝CHAPTER ELAPSED ➝CHAPTER REMAIN
TRACK ELAPSED ➝TRACK REMAIN ➝TOTAL ELAPSED ➝TOTAL REMAIN
TRACK REMAIN ➝TRACK ELAPSED
GROUP ELAPSED ➝GROUP REMAIN ➝TRACK ELAPSED ➝TRACK REMAIN
 
						

							ENG
OPERATION
31 30
Using the Playback Function(Con’t)
Press the  , button.
Each time the button is pressed during playback, the previous or next chapter, track or 
directory (file) will be played.
You cannot skip chapters consecutively.
Skipping Scenes/Songs
TITLE 01/05 CHAPTER 002/045TITLE 01/05 CHAPTER 004/045
DVDMP3
DVD
MP3
CHAPTER: Repeatedly plays the selected chapter.
TITLE: Repeatedly plays the selected title.
GROUP: Repeatedly plays the selected group.
RANDOM: Plays tracks in random order.
(A track that has already been played may be played again.)
TRACK: Repeatedly plays the selected track.
DIR: Repeatedly plays all tracks in the selected folder.
DISC: Repeatedly plays the entire disc.
OFF: Cancels Repeat Playback.
Repeat Playback Options
Press the REPEATbutton.
Each time the button is pressed during playback, the repeat playback mode changes as
follows:
1Press the INFObutton twice.
2Press the Cursor button to move to REPEAT PLAYBACK( ) display.
3Press the Cursor button to select the desired Repeat Playback mode.
To select another album and track, repeat Steps 2 and 3 above.
4Press the ENTERbutton.
• For DivX, MP3 and JPEG discs, you cannot select Repeat Play from the information
display screen.
To Select a Repeat Playback Mode in the Disc Information Screen
Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file).
Repeat PlaybackDVDCDMP3JPEGDivX
DVDCD
DVDCD
DVD-VIDEO
DVD-AUDIO
CD
MP3JPEGDivX
REPEAT : CHAPTER ➝REPEAT : TITLE ➝REPEAT : OFF
REPEAT : TRACK ➝REPEAT : GROUP ➝REPEAT : OFF
REPEAT : TRACK ➝REPEAT : DISC ➝REPEAT : OFF
REPEAT : RANDOM ➝REPEAT : TRACK ➝REPEAT : DIR ➝
REPEAT : DISC ➝REPEAT : OFF
 
						

							ENG
OPERATION
32
Using the Playback Function(Con’t)
A-B Repeat Playback
• The A-B Repeat function does not operate with DivX, MP3 or JPEG discs.
• No sound is heard during step motion playback.
1Press theINFObutton twice.
2Press the Cursor button to move to the REPEAT PLAYBACK ( ) display.
3Press the Cursor , button to select  and then press theENTER
button at the beginning of the desired segment.
When the ENTERbutton is pressed, the selected position will be stored in memory.
4Press theENTERbutton at the end of the desired segment.
The specified segment will be played repeatedly.
To return to normal playback, press the Cursor , button to select 
OFF.
You can repeatedly play back a designated section of a DVD.
Press theSTEPbutton.The picture moves forward one frame each time the button is pressed during playback.
DVD
Step Function
33
1Press theINFObutton.
2Press the Cursor button to move to ANGLE ( ) display.
3Press the Cursor , or numeric buttons to select the desired angle.
Each time the button is pressed, the angle changes as follows:
This function allows you to view the same scene in different angles.
Angle Function
2/3
3/3
1/3
• The Angle function works only with discs on which multiple angles have been recorded.
1Press the ZOOMbutton.
2Press the Cursor  , , , button to move to the area you want to
enlarge.
3Press the ENTERbutton.
Each time the button is pressed, the zoom level changes as follows:
ZOOM X 1.5 ➝ZOOM X 2 ➝ZOOM X 3 ➝ZOOM OFF
This function allows you to enlarge a particular area of the displayed image.
Zoom (Screen Enlarge) Function
• When a DivX disc is being played, the screen is enlarged up to twice the normal size.
DVD
DVDDivX
SELECT ZOOM POSITION
DivXDVD
A - B
REPEAT : A-B
 
						

							ENG
OPERATION
35 34
Using the Playback Function(Con’t)
• This function will not work if the DVD is recorded with multi-camera angle format.
• Black bars may not disappear because some DVD discs have a built-in horizontal to 
vertical ratio.
• This feature is not supported for DivX discs.
• During the EZ View operation, some of the left and right sides may be cut slightly.
Press theEZ VIEWbutton.
Each time the button is pressed, the zoom function will switch between On and Off.
When a movie is played in Widescreen format, black bars at the top and bottom of the TV
screen can be removed by pressing the EZ VIEW button.
EZ VIEW  Function
EZ VIEW
EZ VIEW  OFF
DVD
• If you eject the disc, switch the power off, or unplug the player, you will need to re-enter
the key number.
When you play a DVD-Audio disc that has a bonus group, the key number
input screen appears automatically.
Some DVD-Audio discs have an extra ‘bonus’ group that requires a 4-digit key number to access. See the disc packaging for
details and the key number.
Bonus Group
During playback, press the  button on the remote control.
You can select the desired image from a DVD-Audio disc containing still images.With some discs, you may not be able to select images.
,
Navigating Pages
BONUS GROUP
KEY NUMBER : 
DVD-AUDIO
DVD-AUDIO
• To operate this function, you can also press the AUDIO or SUBTITLE buttons on the
remote control.
• Depending on the disc, the Subtitle and Audio Language functions may not be available.
1Press the INFObutton twice.
2Press the Cursor , button or numeric buttons to select the desired audio
language.
Depending on the number of languages on a DVD disc, a different audio language (ENGLISH,
SPANISH, FRENCH, etc.) is selected each time the button is pressed.
Audio Language Selection Function
SP 2/3
FR 3/3
1Press theINFObutton twice.
2Press the Cursor button to move to SUBTITLE( ) display.
3Press the Cursor button or numeric buttons to select the desired subtitle.
Subtitle Language Selection Function
EN 1/3EN 01/ 03OFF
SP 02/ 03
FR 03/ 03
OFF / 03
DVD
DVD
 
						

							ENG
OPERATION
37 36
Using the Playback Function(Con’t)
Moving Directly to a Scene/Song
1Press theINFObutton.
2Press the Cursor , button or numeric buttons to select the
desired title/track ( )  and then press theENTERbutton.
3Press the Cursor , button to move to the Chapter ( ) display.
4Press the Cursor , button or numeric buttons to select the
desired chapter and then press the ENTERbutton.
5Press the Cursor , button to move to time ( )  display.
6Press the numeric buttons to select the desired time and then press
the ENTERbutton.
Press the numericbuttons.
The selected file will be played.
When playing an MP3 or JPEG disc, you cannot use the Cursor,button to move to a folder.
To move a folder, press STOP( ) and then press the Cursor
,button.
• You can press the  button on the remote control to move directly to the desired
title, chapter, or track.
• Depending on the disc, you may not be able to move to the selected title or time.
01/05001/040 0:00:37 1/1
Using the Disc Menu
Using the Title Menu
• The disc menu display may be different depending on the disc.
1In Stop mode, press the MENUbutton.
2Press the Cursor 
,button to move to the and then
press the ENTER button.
When you select Disc Menu and it is not supported by the disc, the  message appears on the screen.
3Press the Cursor , , , button to select the desired item.
4Press theENTERbutton.
You can use the menus for the audio language, subtitle language, profile, etc.
DVD menu contents differ from disc to disc.
• The Title menu display may be different depending on the disc.
1In Stop mode, press the MENUbutton.
2Press the Cursor 
,button to move to the .
3Press theENTERbutton.
The title menu appears.
Press theEXITbutton to exit the setup screen.
Press theEXITbutton to exit the setup screen.
For DVDs containing multiple titles, you can view the title of each movie. Depending on the disc, the availability of this feature
may vary.
DVDCDMP3JPEG
DVDCD
MP3JPEG
DVD
DVD
ENTER MOVE EXIT
ENTER MOVE EXIT
 
						

							ENG
OPERATION
39 38
• CBI (Control/Bulk/Interrupt) is not supported.
• Digital Cameras that use PTP protocol or require additional program installation when connected 
to a PC are not supported.
• A device using NTFS file system is not supported. (Only FAT 16/32 (File Allocation Table 16/32) file 
system is supported.)
• Some MP3 players, when connected to this product,may not operate depending on the sector size
of their file system.
• The USB HOST function is not supported if a product that transfers media files by its manufacturer-
specific program is connected.
• Does not operate with Janus enabled MTP (Media Transfer Protocol) devices.
• The USB host function of this product does not support all USB devices.
For information on the supported devices, see page 57. Supported Formats
File nameFile
Bit rate Version PixelSampling
extension Frequency
Still PictureJPG JPG  .JPEG––640x
480–
MusicMP3 .MP3 80~384kbps––44.1kHz
WMA .WMA 56~128kbps V8–44.1kHz
MovieWMV .WMV 4Mbps V1,V2,V3,V7 720x480 44.1KHz~48KHz
DivX .AVI,.ASF 4Mbps DivX3.11~DivX5.1,XviD 800x600 44.1KHz~48KHz
You can enjoy media files such as pictures, movies and music saved in an MP3 player, USB memory or digital camera in high
quality video by connecting the storage device to the USB port of the home theater.
Playing Media Files using the USB Host Feature
1Connect the USB device to the USB port on the side of the unit.
2Press the FUNCTION button on the DVD Player or the USBbutton on the
remote control to select the USB mode.
 appears on the display screen and then disappears.
The USB MENU screen appears on the TV screen and the saved file is played.
3To stop playback, press theSTOP( ) button.
Safe USB Removal
To prevent damage to the memory stored in the USB device, perform safe removal before
disconnecting the USB cable.
(1)  Press the STOP( ) button twice in a row.
The display will show REMOVE USB.
(2) Remove the USB cable.
During playback, press the  button.
When there is more than one file and you press the  button, the next file is selected.
When there is more than one file and you press the  button, the previous file is selected.
Skip Forward/Back
To play back the disc at a faster speed, press the  button during playback.
Each time you press either button, the playback speed will change as follows:
2x ➝4x ➝8x ➝32x ➝Normal.
Fast Playback
Compatible Devices
1. USB devices that support USB Mass Storage v1.0. (USB devices that operate as a removable disc 
in Windows (2000 or later) without additional driver installation.)
2. MP3 Player: HDD and flash type MP3 players.
3. Digital camera: Cameras that support USB Mass Storage v1.0.
• Cameras that operate as a removable disc in Windows (2000 or later) without additional driver installation.
4. USB HDD and USB Flash Drive: Devices that support USB2.0 or USB1.1.
• You may experience a difference in playback quality when you connect a USB1.1 device.
• For a USB HDD, make sure to connect an auxiliary power cord to the USB HDD for proper operation.
5. USB card Reader: One slot USB card reader and Multi slot USB card reader.
• Depending on the manufacturer. the USB card reader may not be supported.
• If you install multiple memory devices into a multi card reader, you may experience problems.
6. If you use a USB extension cable, the USB device might not be recognized.
PHONESUSB