Samsung Ht X200 Instruction Manual

DIGITAL HOME 
THEATER SYSTEM
HT-X200
COMPACT
DIGITAL AUDIO
ENG Instruction Manual
AH68-01963R
REV : 00
If you have any questions or comments relating to Samsung products, 
please contact the SAMSUNG customer care center.
Samsung Electronics America, Inc.
1-800-SAMSUNG (7267864)
www.samsung.com
 

ENG
3
Precautions
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your player
horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation slots are not
covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may become hot.
Before moving the player, ensure the Disc Insert Hole is empty. This...

4
ENG
5
FeaturesContents
Multi-Disc Playback & FM Tuner
The HT-X200 combines the convenience of multi-disc playback capability, including DVD-AUDIO, DVD-VIDEO, CD, 
MP3-CD, WMA-CD, DivX, CD-R/RW, and DVD R/RW, with a sophisticated FM tuner, all in a single player.
Power Saving Function
The HT-X200 automatically shuts itself off after 20 minutes in Stop mode.
TV Screen Saver Function
If the main unit remains in Stop mode  for 3 minutes, the Samsung logo appears on TV screen.
The HT-X200 automatically...

6
ENG
7
Notes on Discs
DVD players and the discs are coded by region. These regional codes must match in order
for the disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is given on the rear panel of the player.
(Your DVD player will only play DVDs that are labeled with identical region codes.)
16
~
•LD, CD-G, CD-I, CD-ROM and DVD-ROM discs cannot be played on this player.
If such discs are played, a 

message appears on the TV screen.
•DVD discs purchased...

8
ENG
9
Front PanelSide Panel
Accessories 
Rear Panel
Video Cable
AH39-40001V Remote Control 
AH59-01778LFM Antenna 
AH42-00017AUsers Manual 
AH68-01963R
1. Power ( ) button
2. Disc Insert Hole
3. Display
4. Eject button
5. Function button 
6.
Tuning Down & Skip ( ) button
7. Stop ( ) button
8. Play/Pause ( ) button 
9. Tuning Up & Skip ( ) button 
10. Volume Control button
1. Headphone Jack
2. AUX IN 1 Jack
3. USB Port
1. 2.1 Channel Speaker Output Connector
2. Component Video Output Jacks
Connect a TV...

10
ENG
11
Description(Con’t)
Remote Control
1. DVD RECEIVER button 
2. TV button 
3. TV/VIDEO button
4. POWER button
5. Number (0~9) buttons
6. REMAIN button
7. STEP button
8. Tuning Preset/CD Skip buttons
9. VOLUME button
10. MENU button
11. AUDIO button
12. DIGEST button
13. SLIDE MODE button
14. TUNER MEMORY, SD(Standard
Definition)/HD(High Definition) button
15.V-SOUND(Virtual Sound), 
V-H/P(Virtual Headphone) button
16. SLOW, MO/ST button
17. DVD button 
TUNER button
USB, AUX button
18. EJECT...

ENG
CONNECTIONS
13 12
Connecting the Speakers
Front Speakers  
•Place these speakers in front of your listening position, facing
inwards (about 45°) toward you.
•Place the speakers so that their tweeters will be at the same
height as your ear.
Position of the DVD Player
•Place it on a stand or cabinet shelf, or under the TV stand.
Selecting the Listening Position
The listening position should be located about 2.5 to 3 times the
distance of the TVs screen size away from the TV.
Example : For 32 TVs 2~2.4m...

ENG
CONNECTIONS
15 14
Installing the Main Unit
• Be careful not to scratch the surface the DVD Player when installing
the stand.
• 
Do not turn the DVD Player left or right as it may separate it from the stand.
Method 1 : Installing the Stand so that the DVD Player Lays Flat.
Preparation
Disconnect the AC power cord from the AC outlet before installing the main unit.Connect the cables before installation.
Method 2 : Installing the Stand so that the DVD Player Stands up.
Arranging the Cables...

ENG
CONNECTIONS
Choose one of the three methods for connecting to a TV.
Connecting the Video Out to your TV
17 16
Connect the supplied video cable from the VIDEO OUT jack on the back of the DVD Player to the VIDEO IN jack on
your TV.
METHOD 3 : Composite Video ....... (Good Quality) 
If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) from
the Component Video Output (Pr, Pb and Y) Jacks on the back of the DVD Player to the Component Video Input
Jacks...

ENG
CONNECTIONS
19 18
AUX2 : Connecting an External Analog Component
Analog signal components such as a VCR.
AUX1 : Connecting an External Component/MP3 player
1Connect AUX IN 2 (Audio) on the Home Theater to the Audio Out of the external analog component.
Be sure to match connector colors.
2Press theAUXbutton on the remote control to select  input.
You can also use the FUNCTIONbutton on the main unit.
The mode switches as follows :DVD➝D.IN➝AUX 1➝AUX 2➝USB➝FM.
1Connect AUX IN 1 (Audio) on the Home...