Samsung Ht Tz225 User Manual

21
ENG
●  CONNECTIONS
 
Connect the front, Centre and Subwoofer speakers to the  
1. 
DVD Player, referring to page 18~19.
With the DVD Player turned off, insert the TX card into the   
2. 
TX Card Connection (WIRELESS) on the back of the main unit.
Hold the TX card so that the slanted side faces to the left   
•	
and insert the card into the port. 
The TX card enables communication between the main   
•	
unit and the wireless receiver. 
Connect the left and right rear speakers to the wireless  
3....

22
Connections
CONNECTING THE VIDEO OUT TO YOUr TV
Choose one of the three methods for connecting to a TV.
METHOD 1 : HDMI (Best)
Connect the HDMI cable (not supplied) from the HDMI OUT jack on the back of the DVD Player to the 
HDMI IN jack on your TV.HDMI enables you to view movies in High Definition on your HDTV.
METHOD 2 : Component  Video (Better)
If your television is equipped with Component Video  inputs, connect a Component Video cable (not 
supplied) from the Component Video Output (Pr,Pb and Y)...

23
ENG
●  CONNECTIONS
HDMI Auto Detection Function
The player's video output will automatically change to HDMI mode when co\
nnecting an HDMI cable 
while power is on.HDMI (High Definition Multimedia Interface)
•	
HDMI is an interface that enables the digital transmission of video and \
audio data with just a single connector.  
Using HDMI, the DVD Home Cinema transmits a digital video and audio sign\
al and displays a vivid 
picture on a TV having an HDMI input jack.
HDMI connection description
•...

24
Connections
HDMI FUNCTION
Using Anynet+(HDMI-CEC)
Anynet+ is a function that enables you to control other Samsung 
Devices with your Samsung TV's remote control.  Anynet + can be 
used by connecting this Home Cinema to a SAMSUNG TV using a 
HDMI Cable. This is only available with SAMSUNG TV's that 
support Anynet+.
Connect the main unit of the Home Cinema to a Samsung 
1. 
TV with an HDMI cable. (See page 22)
Set the Anynet+ function on your TV.  
2. 
(See the TV instruction manual for more...

25
ENG
●  CONNECTIONS
AUX : Connecting an External Analogue Component
Analogue signal components such as a VCR. 
Connect AUX IN  (Audio) on the Home Cinema to the Audio Out of the ext\
ernal Analogue      
1. 
   component.
   Be sure to match connector colours.  
•	
 
Press the 
2.  AUX button on the remote control to select AUX input. 
You can also use the
•	  FUNCTION button on the main unit.  
           The mode switches as follows :   
           DVD/CD ➞ D.IN  ➞ AUX   ➞ USB   ➞ FM.
 
M  
You can...

26
Connections
CONNECTING THE FM ANTENNA
 
Connect the FM antenna supplied to the FM 75
1.  Ω COAXIAL Jack.
Slowly move the antenna wire around until you find a location where reception is good, then    
2. 
fasten it to a wall or other rigid surface.  
 
M   This unit does not receive AM broadcasts.   
`
 
Cooling Fan
The cooling fan supplies cool air to the unit to  prevent overheating.
Please observe the following cautions for your safety.
Make sure the unit is well-ventilated. If the unit has poor...

27
ENG
The DVD Home Cinema's remote can be used to control Samsung TV's.
Plug the main unit's power cord into the AC power supply.
1. 
Press the 
2.  DVD rECEIVEr button to operate the DVD Home 
Theatre.
 
 
Press the 
3.  FUNCTION button on the main unit or DVD button  
on the remote to enable DVD/CD playback. 
Press the 
4.  TV button to set the remote to TV mode. 
Press the 
5.  POWEr button to turn on your Samsung TV 
 with this remote.  
Press the 
6.  SOUrCE button to select VIDEO mode...

Playback
28
DISC PLAYBACK
dB
 
Press the 
1.  OPEN/CLOSE (     )  button to open the disc tray.
Load a disc.
2. 
Place a disc gently into the tray with the disc’s label facing 
•	
up.
Close the compartment by pressing the 
3.  OPEN/CLOSE (     ) 
button again.
Playback starts automatically.
•	
 
To stop playback, press the STOP (
)  button during playback.
 
If pressed once, 
•	 PrESS PLAY is displayed and the stop position will be stored in memory.    
If the PLAY (
) button or ENTEr button is pressed,...

29
ENG
●  PLAYBACK
MP3/WMA-CD PLAYBACK
Data CDs (CD-R, CD-RW) encoded in MP3/WMA format can be played.
A
Place the MP3/WMA disc on the disc tray.
1. 
The MP3/WMA menu screen will appear and  
•	
playback will start.
The appearance of the menu depends on the  
•	
MP3/WMA disc.
  WMA-DRM files cannot be played.
•	
In Stop mode, use the Cursor 
2.  , , ,  button   
to select the album, and then press the ENTEr  
button.
Use the Cursor 
•	 ,  button to select the track.
To change the album, use the...

Playback
30
JPEG FILE PLAYBACK
Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then played back 
with this Home Theatre.
Slide Mode G
Place the JPEG disc on the disc tray. 
Playback starts automatically. Each image is displayed  
•	
for 5 seconds and then the next image is displayed.
Press the [,]  button to skip to the next slide. 
Each time the button is pressed, the slide moves backward or forward.
•	
rotate/Flip Function G
Press the Cursor  , ,...