Samsung Ht Tx35 Instruction Manual

ENGCONNECTIONS
21
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).1
Connect the Digital Input (OPTICAL) on the Home Theater to the Digital Output of the external digital com-
ponent.
2
Press the AUX button on the remote control to select .■You can also use the FUNCTIONbutton on the main unit.
The mode switches as follows : DVD/CD➝DIGITAL IN➝AUX 1➝AUX 2➝USB➝FM. 
OPTICAL : Rear Panel
Optical Cable(not supplied)
20
Please...

ENG23
Before Reading the Users ManualIcons that will be used in manual
Make sure to check the following terms before reading the user manual.
• In this manual, the instructions marked with DVD (          ) are applicable to DVD-VIDEO, DVD-AUDIO
and DVD-R/-RW discs that have been recorded in Video Mode and then finalized.
Where a particular DVD type is mentioned, it is indicated separately.
• If a DVD-R/-RW disc has not been recorded properly in DVD Video format, it will not be playable.
DVD
OPERATION
22...

ENG25
OPERATION
Disc Playback
1
Press the OPEN/CLOSEbutton to open the disc tray.
2
Load a disc.■Place a disc gently into the tray with the disc’s label facing up.
3
Close the compartment by pressing the OPEN/CLOSEbutton again.■Playback starts automatically.
• Depending on the content of the disc, the initial screen may appear different.
• Pirated discs will not run in this player because it violates the CSS (Content Scrambling System : a copy protection system) rec-
ommendations.
To stop playback, press...

ENGOPERATION
27
Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then played
back with this Home Theater.
JPEG File Playback
• The maximum resolutions supported by this product are 5120 x 3480 (or 19.0 MPixel) for
standard JPEG files and 2048 x 1536 (or 3.0 MPixel) for progressive image files. 
• If a JPEG file is played when the HDMI output resolution is 720p/1080i, the mode is automat-
ically converted to 480p/576p mode.
1
Place the JPEG disc on the...

ENGOPERATION
29
If the disc has more than one subtitle file, the default subtitle may not match 
the movie and you will have to select your subtitle language as follows:1
In Stop mode, press the Cursor , button, select the desired subtitle ( )
from the TV screen, and then press the ENTERbutton.
2
When you select the desired DivX file from the TV screen, the movie will be
played normally.If the Disc has more than One Subtitle File
DivX is a video file format developed by Microsoft and is based on MPEG4...

ENGOPERATION
31
Press the REMAINbutton.■For checking the total and remaining time of a title or chapter being played.
Each time the Remain button is pressed 
Checking the Remaining Time
Press the  , button.■Each time the button is pressed during playback, the playback speed changes as follows:
Fast Playback
2X ➝4X ➝8X ➝32X ➝PLAY
2X ➝4X ➝8X ➝32X ➝PLAY
Press the SLOWbutton.■Each time the button is pressed during playback, the playback speed changes as follows:
Slow Playback
• No sound is heard during slow...

ENGOPERATION
33
CHAPTER: Repeatedly plays the selected chapter.
TITLE: Repeatedly plays the selected title.
GROUP: Repeatedly plays the selected group.
RANDOM: Plays tracks in random order.
(A track that has already been played may be played again.)
TRACK: Repeatedly plays the selected track.
DIR: Repeatedly plays all tracks in the selected folder.
DISC: Repeatedly plays the entire disc.
OFF: Cancels Repeat Playback.
Repeat Playback Options
Press the REPEATbutton.Each time the button is pressed during...

ENGOPERATION
35
1
Press theINFObutton.
2
Press the Cursor button to move to ANGLE ( ) display.
3
Press the Cursor , button or numeric buttons to select the desired angle.■Each time the button is pressed, the angle changes as follows:
This function allows you to view the same scene in different angles.
Angle Function
2/33/31/3
• The Angle function works only with discs on which multiple angles have been recorded.
1
Press the ZOOMbutton.
2
Press the Cursor , , , button to move to the area you want to...

ENGOPERATION
37
• To operate this function, you can also press the AUDIO or SUBTITLE buttons on 
the remote control.
• Depending on the disc, the Subtitle and Audio Language functions may not be available.
1
Press the INFObutton twice.
2
Press the Cursor , button or numeric buttons to select the desired audio
language.■Depending on the number of languages on a DVD disc, a different audio language 
(ENGLISH, SPANISH, FRENCH, etc.) is selected each time the button is pressed. 
Audio Language Selection...

ENGOPERATION
39
Using the Disc MenuUsing the Title Menu
• The disc menu display may be different depending on the disc.
1
In Stop mode, press the MENUbutton.■When playing a VCD (version 2.0), this toggles between  and .
2
Press the Cursor , button to move to and then press
the ENTER button.■When you select Disc Menu and it is not supported by the disc, the  message appears on the screen.
3
Press the Cursor , , , button to select the desired item.
4
Press theENTERbutton.
You can use the menus for the...