Samsung Ht Tx25 Instruction Manual

ENGCONNECTIONS
2021
• This Progressive function works only on TVs equipped with component video inputs (Y, Pr, Pb) that support
Progressive Video. (It does not work on TVs with conventional component inputs, i.e., non-progressive scan TVs.)
• Depending on the capabilities of your TV, this function may not work. P.SCAN 
(Progressive Scan)
Function
1
Press STOP()
button.
If playing a disc, press the STOP ( ) button twice so that “STOP”, appears on the display.
2
Press and hold P.SCANbutton on the remote...

ENGCONNECTIONS
23 22
Connecting the FM Antenna
FM Antenna  (supplied)
1
Connect the FM antenna supplied to the FM 75ΩCOAXIAL Jack.
2
Slowly move the antenna wire around until you find a location where reception is good, then fasten it 
to a wall or other rigid surface.
• This unit does not receive AM broadcasts.Connecting Microphone
1
Connect the microphone to the MIC jack on the front panel.■You can connect up to two microphones.
2
Turn the MIC VOLto adjust the voice volume of the micro phone.
3
Press...

ENG25 24
OPERATION
Before Using Your Home TheaterTo Operate your Samsung TV and the Home Theater with the HT-X20/HT-TX22/HT-TX25s Remote Control
1
Plug the main units power cord into the AC power supply. ■Before plugging your system into a main socket, you must check the voltage setting.
If the voltage of the socket does not correspond to the setting on the rear of the unit, you
may seriously damage your system.
2
Press the TVbutton to set the remote to TV mode.
3
Press the POWERbutton to turn on your...

ENG27 26
OPERATION
MP3/WMA-CD Playback
1
Place the MP3/WMA disc on the disc tray.■The MP3/WMA menu screen will appear and playback will start.■The appearance of the menu depends on the MP3/WMA disc.■WMA-DRM files cannot be played.
2
In Stop mode, use the Cursor , , , button to select the album, 
and then press the ENTERbutton.■Use the Cursor
,
button to select the track.
3
To change the album, use the Cursor , , , button to select another
album in Stop mode, and then press theENTERbutton.■To select...

ENGOPERATION
2829
The functions on this page apply to DivX disc playback.
DivX Playback
During playback, press the  , button.■Goes to the next file whenever you press the  button, if there are over 2 files in the disc. ■Goes to the previous file whenever you press the  button, if there are over 2 files in the disc. Skip Forward/Back
During playback, press the Cursor , button.■Playback skips 5 minutes forward whenever you press the Cursor  button.■Playback skips 5 minutes back whenever you press the...

31 30
GBOPERATION
Press the REMAINbutton.■For checking the total and remaining time of a title or chapter being played.
Each time the Remain button is pressed 
Checking the Remaining Time
Press the  , button.■Each time the button is pressed during playback, the playback speed changes as follows:
Fast Playback
2X ➝4X ➝8X ➝32X ➝PLAY
2X ➝4X ➝8X ➝32X ➝PLAY
Press the SLOWbutton.■Each time the button is pressed during playback, the playback speed changes as follows:
Slow Playback
• No sound is heard during...

ENGOPERATION
33 32
Press the  , button.■Each time the button is pressed during playback, the previous or next chapter, track or 
directory (file) will be played.■You cannot skip chapters consecutively.
Skipping Scenes/Songs
TITLE 01/05 CHAPTER 002/045
TITLE 01/05 CHAPTER 004/045
DVD
VCD
MP3
DVDMP3■When watching a VCD with a track longer than 15 minutes, each time   is pressed, 
playback will skip back or forward 5 minutes.VCD
CHAPTER: Repeatedly plays the selected chapter.
TITLE: Repeatedly plays the...

ENGOPERATION
35 34
A-B Repeat Playback
• The A-B Repeat function does not operate with DivX, MP3 or JPEG discs.• No sound is heard during step motion playback.
1
Press theINFObutton twice.■For a VCD, press the INFO button once.
2
Press the Cursor button to move to the REPEAT PLAYBACK ( ) display.
3
Press the Cursor , button to select  and then press theENTERbut-
ton at the beginning of the desired segment.■When the ENTERbutton is pressed, the selected position will be stored in memory.
4
Press...

ENGOPERATION
3637
• To operate this function, you can also press the AUDIO or SUBTITLE buttons on 
the remote control.
• Depending on the disc, the Subtitle and Audio Language functions may not be available.
1
Press the INFObutton twice.
2
Press the Cursor , button or numeric buttons to select the desired audio
language.■Depending on the number of languages on a DVD disc, a different audio language (ENGLISH,
SPANISH, FRENCH, etc.) is selected each time the button is pressed. 
Audio Language Selection...

ENGOPERATION
39 38
Using the Playback Function
(Con’t)
Moving Directly to a Scene/Song
1
Press theINFObutton.
2
Press the Cursor , button or numeric buttons to select the
desired title/track ( )  and then press theENTERbutton.
3
Press the Cursor , button to move to the Chapter ( ) display.
4
Press the Cursor , button or numeric buttons to select the
desired chapter and then press the ENTERbutton.
5
Press the Cursor , button to move to time ( ) display.
6
Press the numeric buttons to select the desired...