Samsung Ht Tq25 Instruction Manual
Have a look at the manual Samsung Ht Tq25 Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
GB 50 SETUP 21 43 In Stop mode, press MENU button.Press Cursor button to move to ‘Audio’ and then press ENTERbutton. In the Speaker Setup, press the ENTERbuttonPress Cursor , , , buttons to move to the desired speaker and then press ENTERbutton. •For C, SL, and SR, each time the button is pressed, the mode switches alternately as follows: SMALL ➝ NONE. •For L and R, the mode is set to SMALL. SMALL: Select this when using the speakers. NONE: Select this when no speakers are connected. •Depending on PRO LOGIC and STEREO settings, the speaker mode may vary (see page Note Signal outputs and frequency responses from the speakers will automatically be adjusted according to your speaker configuration and whether certain speakers are used or not. Setting the Speaker Mode MOVE ENTEREXIT MOVE ENTER RETURNEXIT MOVE CHANGE RETURNEXIT MOVE ENTEREXIT HT-Q20(41~70) GB 3/1/06 2:45 PM Page 49
51 Setting up the Speaker Delay Time When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same. Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the sound of the Center and Surround Speakers. 21 In Stop mode, press MENU button.Press Cursor button to move to ‘Audio’ and then press ENTER button. •With (Dolby Pro Logic II), the delay time may be different for each mode. •With AC-3 and DTS, the delay time can be set between 00 and 15mSEC. •The Center channel is only adjustable on 5.1 channel discs. Note If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the center and rear speakers. Setting the Delay Time MOVE ENTER EXITMOVE ENTER EXIT HT-Q20(41~70) GB 3/1/06 2:45 PM Page 50
GB 52 Df: The distance from FRONT SPEAKER Dc: The distance from CENTER SPEAKER Ds: The distance from SURROUND SPEAKER Ideal CENTER SPEAK- ER placement It is desirable to place all speakers within this circle.Ideal SUR- ROUND SPEAKER placement SETUP •You can set the delay time for C between 00 and 05mSEC and for SL and SR between 00 and 15mSEC. 435 Press Cursor button to move to ‘DELAY TIME’ and then press ENTERbutton.Press Cursor , , , buttons to move to the desired speaker and then press ENTERbutton. Press Cursor , to set the Delay time. 0 ms 3 ms 6 ms 9 ms 12 ms 15 ms • Setting REAR (SURROUND) SPEAKERS If the distance of Df is equal to the distance of Ds in the figure, set the mode as 0ms. Otherwise, change the setting according to the table. • Setting CENTER SPEAKER If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms. Otherwise, change the setting according to the table. Distance between Df and Dc Delay Time Delay Time 0 ms 1 ms 2 ms 3 ms 4 ms 5 ms Distance between Df and Ds 0 inch 13.6 inches 27.2 inches 40.8 inches 4.5 feet 5.6 feet 0 inch 40.8 inches 6.7 feet 10.0 feet 13.4 feet 16.7 feet MOVE ENTER EXIT RETURN MOVE CHANGE RETURNEXIT MOVE SELECT RETURNEXIT HT-Q20(41~70) GB 3/1/06 2:45 PM Page 51
L: Front Speaker (L) C: Center Speaker SW: Subwoofer R: Front Speaker (R) SL: Rear Speaker (L) SR: Rear Speaker (R) Press RETURNbutton to return to the previous level. Press MENUbutton to exit the setup screen. 21 In Stop or no disc mode, press MENU button.Press Cursor button to move to ‘Audio’ and then press ENTERbutton. 3 Press Cursor button to move to ‘TEST TONE’ and then press ENTERbutton. •The test tone will be sent to L➝ C ➝ R ➝ SR ➝ SL➝ SW in order. If the ENTER button is pressed again at this time, the test tone will stop. Press TEST TONEbutton. • Test tone will be produced as follows: When playing a DVD or CD, this will work only in Stop mode. • Use this function to check that each speaker is correctly connected and that there is no problem. To end the test tone, press TEST TONEbutton again. Alternate method: press the TEST TONEbutton on the remote. Multi-Channel Pro Logic Mode Start Use the Test Tone feature to check the speaker connections. Setting the Test Tone 53 MOVE ENTER EXITMOVE ENTER EXIT MOVE ENTER RETURN EXIT STOP EXIT HT-Q20(41~70) GB 3/1/06 2:45 PM Page 52
GB 54 12 In Stop or no disc mode, press MENUbutton.Press Cursor button to move to ‘Audio’ and then press ENTER button. •When the Cursor button is pressed, the effect is greater, and when the Cursor button is pressed, the effect is smaller. 34 Press Cursor button to move to ‘DRC’ and then press ENTER button.Press Cursor , to adjust the ‘DRC’. Press RETURNbutton to return to the previous level. Press MENUbutton to exit the setup screen. This feature balances the range between the loudest and quietist sounds. You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night. Setting the DRC (Dynamic Range Compression) SETUP MOVE ENTER RETURN EXITCHANGE RETURN EXIT MOVE ENTER EXITMOVE ENTER EXIT HT-Q20(41~70) GB 3/1/06 2:45 PM Page 53
55 Press RETURNbutton to return to the previous level. Press MENUbutton to exit the setup screen. 21 43 In Stop mode, press MENU button.Press Cursor button to move to ‘Audio’ and then press ENTERbutton. Press Cursor button to move to ‘SOUND EDIT’ and then press ENTERbutton. Method 1When adjusting the audio quality using the setup screen Press Cursor , buttons to select and adjust the desired item. Press the , buttons to adjust the settings. You can adjust the balance and level for each speaker. Setting the Audio MOVE ENTER EXITMOVE ENTER EXIT MOVE ENTER RETURN EXITMOVE CHANGE RETURN EXIT HT-Q20(41~70) GB 3/1/06 2:45 PM Page 54
GB Adjusting Front/Rear Speaker Balance •You can select between 00 and –06 and OFF. •The volume decreases as you move closer to –6. Adjusting Center/Rear/Subwoofer Speaker Level •The volume level can be adjusted in steps from +6dB to –6dB. •The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB. Method 2When manually adjusting with the SOUND EDIT button 21 Adjusting Front Speaker BalanceAdjusting Rear Speaker Balance Press SOUND EDITbutton and then press Cursor , . 3 Adjusting Center Speaker Level 45 Adjusting Rear Speaker LevelAdjusting Subwoofer Speaker Level 56 Press SOUND EDITbutton and then press Cursor , .Press SOUND EDITbutton and then press Cursor , . Press SOUND EDITbutton and then press Cursor , .Press SOUND EDITbutton and then press Cursor , . Note SETUP HT-Q20(41~70) GB 3/1/06 2:45 PM Page 55
Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to to match the video. AV SYNC Setup 57 Press RETURNbutton to return to the previous level. Press MENUbutton to exit the setup screen. 21 •Setup menu appears. 3 Press Cursor , buttons to move to ‘Audio’ and then press ENTERbutton. Press Cursor , buttons to move to ‘AV-SYNC’ and then press ENTERbutton. Press the MENUbutton. 4 •You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status. Press Cursor , buttons to select the AV-SYNC Delay Time and then press the ENTERbutton. MOVE ENTER EXIT MOVE ENTER RETURN EXITMOVE SELECT RETURN EXITMOVE ENTER EXIT HT-Q20(41~70) GB 3/1/06 2:45 PM Page 56
GB 58 •DSP appears on the display panel. •Each time the button is pressed, the selection changes as follows: POP, JAZZ, ROCK:Depending on the genre of music, you can select POP, JAZZ, and ROCK. STUDIO: Provides a sense of presence as if in a studio. CLUB: Simulates the sound of a dance club with a throbbing bass beat. HALL: Provides a clear vocal as if listening in a concert hall. MOVIE: Provides the feeling of a movie theater. CHURCH: Gives the feel of being in a grand church. PASS:Select this for normal listening. Press DSP/EQbutton. SETUP •DSP/EQ function is only available in STEREO mode. Press the PL II mode button to show STEREO on the display. •This feature works with CDs, MP3-CDs, 2 channel DivX and Dolby Digital discs. •When playing a DVD disc encoded with two or more channels, multi-channel mode will be selected automatically and DSP/EQ function does not work. Note DSP(Digital Signal Processor) DSP modes have been designed to simulate different acoustic environments. EQ: You can select ROCK, POP, or CLASSIC to optimize the sound for the genre of music you are playing Sound Field (DSP)/EQ Function HT-Q20(41~70) GB 3/1/06 2:45 PM Page 57
59 Press PL II MODEbutton. PRO LOGIC II •MUSIC: When listening to music, you can experience sound effects as if you are listening to the actual performance. •CINEMA: Adds realism to the movie soundtrack. •PRO LOGIC: You will experience a realistic multi-channel effect, as if using five speakers, while using just the front left and right speakers. •MATRIX: You will hear 5.1 channel surround sound. STEREO: Select this to listen to sound from the front left and right speakers and the subwoofer only. •Each time the button is pressed, the mode changes as follows. •When selecting Pro Logic II mode, connect your external device to the AUDIO INPUT jacks (L and R) on the player. If you connect to only one of the inputs (L or R), you cannot listen to surround sound.Note You can select the desired Dolby Pro Logic II audio mode. Dolby Pro Logic II Mode HT-Q20(41~70) GB 3/1/06 2:45 PM Page 58