Samsung Ht Tq22r Instruction Manual

							GB
20
OPERATION
•Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VIDEO, and Numeric (0-9) buttons.
•By default, the remote control is set to work with Samsung TVs. 
See page 67 for more information about remote control operation with other manufacturers TVs.
2
3
Press TVbutton to
set the remote to TV
mode.
Press the POWER
button to turn on
your Samsung TV
with this remote.
56
Press FUNCTIONbutton
on the main unit or DVD
button on the remote to
enable DVD/CD playback.
1
Plug the main units
power cord into the
AC power supply. 
4
Press DVD RECEIVER
button to switch to
DVD RECEIVER
mode.
Note
Your Home Theater is capable of playing DVD, CD, MP3/WMA and JPEG discs.Depending on the disc you are
using, these instructions may vary slightly. Read the instructions carefully before using.
Before Using Your Home Theater
To Operate your Samsung TV and the Home Theater with the HT-Q20/HT-TQ22/HT-TQ25s Remote Control
Press TV/VIDEO
button to select
VIDEO mode on
your TV.
VIDEO
HT-Q20(1~40P) GB  3/1/06 2:41 PM  Page 23
 
						

							21
•In this manual, the instructions marked with DVD (               ) are applicable
to DVD-VIDEO and DVD-R/RW discs.
Where a particular DVD type is mentioned, it is indicated separately.
•Depending on the content of the disc, the initial screen may appear different.
DVDNote
Titles and chapters (DVD-VIDEO)
•DVD-video is divided into several large sections called titles and smaller sections called chapters.
Numbers are allotted to these sections. 
These numbers are called title numbers and chapter numbers.
TITLE 1 TITLE 2
CHAPTER 1 CHAPTER 2 CHAPTER 1 CHAPTER 2CHAPTER 3
Tracks (Video and music CDs)
•Video and music CDs are divided into sections called tracks. 
Numbers are allotted to these sections. These numbers are called track numbers.
TRACK 1 TRACK 2 TRACK 4 TRACK 5TRACK 3
Files (DivX)
•DivX is divided into sections called files. 
Numbers are allotted to these sections. These numbers are called file numbers.
FILE 1 FILE 2
Disc terminology
Before Using Your Home Theater
HT-Q20(1~40P) GB  3/1/06 2:41 PM  Page 24
 
						

							GB
22
OPERATION
To stop playback, press STOPduring playback.
• If pressed once, “PRESS PLAY” is displayed and the stop position will be
stored in memory. If PLAY/PAUSE(         ) button or ENTERbutton is
pressed, playback resumes from the stop position. (This function works only
with DVDs.)
• If pressed twice, “STOP” is displayed, and if PLAY/PAUSE(         ) button is
pressed, playback starts from the beginning.
To temporarily pause playback, press PLAY/PAUSE
during playback.
•To resume playback, press PLAY/PAUSE(         ) button again.
DVDVCDCD
•Playback starts automatically.
Selecting the Video Format
Press and hold NT/PALbutton on the remote controller for over 5 seconds
while the power is turned off. 
•By default, the video format is set to PAL.
•NTSC or PA L will appear in the display. At this time, press the NT/PALbutton
shortly to select between NTSC and PA L.
•Each country has a different video format standard. 
•For normal playback, the video format of the disc must be the same as the video
format of your TV. 
Disc Playback
2
Load a disc.
•Place a disc gently into the tray with the disc’s label
facing up.
•Depending on the content of
the disc, the initial screen may
appear different.
1
Press OPEN/CLOSEbutton to open the
disc tray.
3
Close the compartment by pressing the
OPEN/CLOSEbutton again.
Note
HT-Q20(1~40P) GB  3/1/06 2:41 PM  Page 25
 
						

							23
•Depending on the recording mode, some MP3/WMA-CDs may not play.
•Table of contents of a MP3-CD varies depending on the MP3/WMA track
format recorded on the disc.Note
2
In Stop mode, use     
to select
the album, and then
press the ENTER
button.
•The MP3/WMA menu screen will appear
and playback will start.
•The appearance of the menu depends on
the MP3/WMA disc.
•WMA-DRM files cannot be played.
•Use         to select the track.
1
Press the
OPEN/CLOSEbutton
to open the disc tray,
and then load the
MP3/WMA disc.
4
Press the STOP
button to stop
playback.
•To select another album and track,
repeat Steps 2 and 3 above.
3
To change the album,
use                 to
select another album
in Stop mode, and
then press the
ENTERbutton.
Data CDs (CD-ROM, CD-R, CD-RW) encoded in MP3/WMA format can be played.
MP3/WMA-CD Playback
•Music File Icon
•Image File Icon
•Movie File Icon
•All File Icon
Press the                button when it is in stop
status and select a desired icon from the top
part of the menu.
•To play music files only, select the          Icon.
•To view image files only, select the          Icon.
•To view movie files only, select the          Icon.
•To select all files select the          Icon.
To play a file icon in the screen,
HT-Q20(1~40P) GB  3/1/06 2:41 PM  Page 26
 
						

							GB
OPERATION
24
Press INFObutton.
•Each time the button is pressed, the display changes as follows:
DVD
The information Display
disappears from the screen
The information Display
disappears from the screenThe information Display
disappears from the screen
CD
•appears on the TV screen! 
If this symbol appears on the TV screen while buttons are being operated,
that operation is not possible with the disc currently being played.
•Depending on the disc, the disc
information display may appear different.
•Depending on the disc, you can also
select DTS, DOLBY DIGITAL, or PRO
LOGIC.
Note
You can view disc playback information  on the TV screen.
Displaying Disc Information
Screen Display
CD display DVD display
VCD display
TITLE displayELAPSED TIME display
TRACK (FILE) display
CHAPTER display
SUBTITLE display
AUDIO LANGUAGE display
REPEAT PLAYBACK display
ANGLE display
DOLBY DIGITAL displaySTEREO (L/R) display
•What is a Title? 
Amovie contained in a DVD-VIDEO disc.
•What is a Chapter? 
Each title on a DVD disc is divided into several smaller sections called
chapters.
•What is a Track (File)?Asection of video or a music file recorded on a CD, or MP3-CD.
VCD
Something like you
Back for good
Love of my life
More than words
DVD RECEIVER                                     SMART NAVI
MP3DivXJPEG
HT-Q20(1~40P) GB  3/1/06 2:41 PM  Page 27
 
						

							Slide Mode
25
Place the JPEG disc on the disc tray.
•Each time the button is pressed, the slide moves backward or forward.
Press                 to skip to the next slide.
1
Press the OPEN/CLOSEbutton.2
•Playback starts automatically.
•Each time the button is pressed, the image makes the transition as follows:
Press SLIDE MODEbutton.3
From top to bottom
From bottom to top
Rectangular shape in the center
Vertical blinds effect
Each time a new image is displayed, slide modes
(1~11) will be applied randomly and automatically.
Cancels the slide mode.
Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then
played back with this Home Theater.
JPEG File PlaybackJPEG
HT-Q20(1~40P) GB  3/1/06 2:41 PM  Page 28
 
						

							GB
Rotate/Flip Function
button: Flip Vertically
button: Flip Horizontally
button: Rotate 90°
Counterclockwisebutton: Rotate 90° Clockwise
Digest Function
2
Press Cursor     ,    ,    ,    buttons 
to select the desired image and
then press ENTERbutton.
1
Press DIGEST
button during
playback.
•JPEG files will be shown in  
9 windows. You can view 9 JPEG images on the TV screen.•The selected image is played for 5 seconds before moving
to the next image.
26
To view the previous or next image with 9 windows, press             .
Press Cursor     ,    ,    ,     buttons during playback.
Original Image
OPERATION
•The maximum resolutions supported by this product are 5120 x 3480 (or 19.0 MPixel) for
standard JPEG files and 2048 x 1536 (or 3.0 MPixel) for progressive image files. Note
HT-Q20(1~40P) GB  3/1/06 2:41 PM  Page 29
 
						

							Fast playback Skip Forward/Back
During playback, press the              button.
•Goes to the next file whenever you press           button, if there are over 
2 files in the disk. 
•Goes to the previous file whenever you press           button, if there are
over 2 files in the disk. 
To play back the disc at a faster speed, 
press       or      during playback.
•Each time you press either button, the playback speed will change as
follows: 
2x ➞4x ➞8x ➞32x ➞Normal.
27
•DIVX file can be zoomed only in ZOOM X2 mode. 
•DivX files have .Avi file extensions, however, not all .Avi files are DivX
and may not be playable in this unit.
Note
Zoom Function
2
Press Cursor    ,  ,     
,   buttons to move
to the area you want
to enlarge.
1Press ZOOM
button.
•Each time you press the button,
your selection will toggle between
“ZOOM X2” and “ZOOM OFF”.
DivX Playback
5 Minute Skip function
During playback, press the    ,   button. 
•Playback skips 5 minutes forward whenever you press button.
•Playback skips 5 minutes back whenever you press button.
The functions on this page apply to DIVX disc playback.
HT-Q20(1~40P) GB  3/1/06 2:41 PM  Page 30
 
						

							GB
28
OPERATION
•          is displayed when there is one supported language in the disc.Note
Press the SUBTITLEbutton.
•Each time you press the button, your selection will toggle between “SUBTITLE(1/1, 1/2 ...)” and “SUBTITLE OFF”.
•If the disc has only one subtitle file, it will be played automatically.
•See number 2 (Caption Function) below for more details concerning Subtitle usage with DIVX discs.
Subtitle Display
Press the AUDIObutton.
•If there are multiple audio tracks on a disc, you can toggle between them.
•Each time you press the button, your selection will toggle between “AUDIO(1/1, 1/2 ...)” and  
“”.
Audio Display
Format AVI WMV
Supported Versions DivX3.11 ~ 5.1 V1/V2/V3/V7
DivX(Digital internet video eXpress)
DivX is a video file format developed by Microsoft and is based on MPEG4 compression technology
to provide audio and video data over the Internet in real-time. 
MPEG4 is used for video encoding and MP3 for audio encoding so that the users can watch a movie
at near DVD-quality video and audio.
1. Supported Formats
•This product only supports the following media formats.If both video and audio formats are not
supported, the user may experience problems such as broken images or no sound.
2. Caption Function
•You must have some experience with video extraction and editing in order to use this feature properly.
•To use the caption function, save the caption file (*.smi) in the same file name as that of the DivX
media file (*.avi) within the same folder. 
Example.   Root Samsung_007CD1.avi
Samsung_007CD1.smi 
•Up to 60 alphanumeric characters or 30 East Asian characters (2 byte characters such as Korean and
Chinese) for the file name. 
●Supported Video Formats
Format MP3 WMA AC3 DTS
Bit Rate 80~384kbps 56~128kbps 128~384kbps 1.5Mbps
Sampling Frequency44.1khz 44.1/48khz 44.1khz
•DivX files, including audio and video files, created in the DTS format can only support up to 6Mbps.
•Aspect Ratio: Although default DivX resolution is 640*480 pixels (4:3), this product supports up to
720*480 pixels (16:9). TV screen resolutions higher than 800 will not be supported.
•When you play a disc whose sampling frequency is higher than 48khz or 320kbps, you may
experience shaking on the screen during playback.
●Supported Audio Formats
HT-Q20(1~40P) GB  3/1/06 2:41 PM  Page 31
 
						

							29
Checking the Remaining Time
Press the REMAINbutton.
•For checking the total and remaining time of a title or chapter
being played.
Each time the REMAIN button is pressed 
CHAPTER REMAIN
TITLE REMAIN
CHAPTER ELAPSEDTITLE ELAPSED
DVD-
VIDEOCDVCD
TRACK REMAIN
TOTAL ELAPSED
TOTAL REMAIN TRACK ELAPSED
MP3
TRACK ELAPSEDTRACK REMAIN
HT-Q20(1~40P) GB  3/1/06 2:41 PM  Page 32