Samsung Ht Tp33 Instruction Manual
Have a look at the manual Samsung Ht Tp33 Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
GB 60 RADIO OPERATION 59 To tune in to a preset station, press on the remote control to select a channel. •Refer to Step 2 on page 59 to automatically or manually tune in to a station.2 1•Each time the button is pressed, the band switches between FM ➝ AM. •“PRGM” flashes in the display. 3 Example: Presetting FM 89.1 in the memory Press TUNING/CH to select 89.10. Press the TUNER button and select the FM band. •Press the TUNER MEMORYbutton before ‘PRGM’ disappears from the display.•‘PRGM’ disappears from the display and the station is stored in memory.5 4•You can select between 1 and 15. Press the TUNER MEMORY button. Press the TUNER MEMORY button again. 6 To preset another station, repeat steps 2 to 5. Press to select preset number. TITLE CHAP PRGM RDS RT STTUNEDkHzMHz TITLE RDS RT STTUNEDkHzMHz TITLE RDS RT STTUNEDkHzMHz TITLE RDS RT STTUNEDkHzMHz TITLE CHAP RDS RT STTUNEDkHzMHz Presetting Stations 2 1• The selection toggles back and forth between FM ➝ AM each time the TUNERbutton is pressed. Tune in to the desired station. Press TUNER button. Automatic Tuning 2Manual Tuning2 1 Select a broadcast station. Press the STOP( ) button to select PRESET and then press button to select the preset station. Automatic Tuning 1 Press the Function button to select the desired band (FM, AM). Press the STOP ( ) button to select MANUAL and then press and hold button to automatically search the band. Automatic Tuning 2 Press STOP ( ) to select MANUAL and then briefly press to tune in to a lower or higher frequency. Manual Tuning •Each time the button is pressed, the sound switches between STEREO and MONO.•In a poor reception area, select MONO for a clear, interference-free broadcast.Press MO/STbutton to listen in Mono/Stereo. (This applies only when listening to an FM station.) When is pressed, a preset broadcast station is selected. Press and hold TUNING/CH to automatically search for active broadcasting stations. Briefly press TUNING/CH to increase or decrease the frequency incrementally. Automatic Tuning 1 Remote Control UnitMain Unit You can listen to the chosen band (FM, AM broadcast stations) by using either the automatic or manual tuning operation.Listening to Radio You can store up to:15 FM stations 15 AM stations • FMFrequency Modulation • AMMedium Wave •Up to 15 stations (30 total ; 15FM, 15AM) can be saved in memory. If you save more than 15 stations, the oldest station previously saved is removed and a new station is stored in its place. Note
GB 62 61 PTY (Program Type) indication and PTY-SEARCH functionTo search for a program using the PTY codesBefore you start, remember...• The PTY Search is only applicable to preset stations.• To stop searching any time during the process, press PTY SEARCH while searching.• There is a time limit in doing the following steps. If the setting is cancelled before you finish, start from step 1 again.• When pressing the buttons on the primary remote control, make sure that you have selected the FM station using the primary remote control. One of the advantages of the RDS service is that you can locate a particular kind of program from the preset channels by specifying the PTY codes. Press PTY SEARCH while listenning to an FM station.1 Press the PTY-or PTY+until the PTY code you want appears on the display.• The display gives you the PTY codes described to the right. 2 Press PTY SEARCH again, while the PTY code selected in the previous step is still on the display.• The center unit searches 15 preset FM stations,stops when it finds the one you have selected, and tunes in that station. 3 Display NEWS AFFAIRS INFO SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED POP M ROCK M M.O.R.M LIGHT M CLASSICS OTHER M WEATHER FINANCE CHILDREN SOCIAL A RELIGION PHONE IN TRAVEL LEISURE JAZZ COUNTRY NATION M OLDIES FOLK M DOCUMENTProgram Type • News including an announced opinion and report • Several matters including a current incident, documentary, discussion and analysis. • Information including weights and measures, returns and forecast, matters interesting the customer, medical information, etc. • Sports • Education • Drama-Radio serial, etc. • Culture-National or local culture including the religious problem, social science, language, theater,etc. • Natural science and technology • Others-Speech, amusing program (quiz, game), interview, comedy and satirical play, etc. • Pop music • Rock music • Current contemporary music considered to be “easylistening.” • Light classical music- Classical music and instrumental and chorus music • Heavy classical music-Orchestra music, symphony, chamber music and opera • Other music - Jazz, R&B country music • Weather • Finance • Children’s programmes • Social affairs • Religion • Phone in • Travel • Leisure • Jazz Music • Country Music • National Music • Oldies Music • Folk Music • Documentary • RDS may not operate correctly if the station tuned is not transmitting RDS signal properly or if the signal strength is weak.• If searching finishes at once,“PS”,and “RT” will not appear on the display. Using the RDS (Radio Data System) to receive FM stationsWhat information can RDS signals provide?RDS allows FM stations to send an additional signal along with their regular program signals. For example,the stations send their station names,as well as information about what type of program they broadcast, such as sports or music,etc.When tuned to an FM station which provides the RDS service,the RDS indicator lights up on the display.• Description on RDS function 1. PTY (Program Type) : Displays the type of programme currently being broadcast 2. PS NAME (Program Service Name) : Indicates the name of broadcasting station and is composed of 8 characters. 3. RT (Radio Text) : Decodes the text broadcast by a station (if any) and is composed of maximum 64 characters. 4. CT (Clock Time) : Decodes the real time clock from the FM frequency. • Some stations may not transmit PTY, RT or CT information therefore this may not be displayed in all cases. 5. TA (Traffic Announcement) : When this symbol flashes it shows that the traffic announcement is in progress. NoteNoteYou can see the RDS signals the station sends on the display.TO show the RDS signalsPress RDS DISPLAY while listening to an FM station. Each time you press the button, the display change to show you the following information: PS (Program Service) :While searching,PSappears and then the station names will be displayed.NO PS appears if no signal is sent. RT(RadioText) : while searching,RTappears and then text messages the station sends will be displayed. NO RTappears if no signal is sent. Frequency : station frequency (non-RDS service)About characters shown in the displayWhen the display shows PS,or RT signals,the following characters are used.• The display window cannot differentiate upper case and lower case lrtters and always uses upper case letters.• The display window cannot show accented letters, “A,” for instance, may stans for accented “A’s” like “À, Â, Ä, Á, Åand Ã.”About RDS broadcasting RADIO OPERATION
GB 64 •Each time the button is press, the brightness changes as follows: DARK➞BRIGHT. TITLE CHAP PRGM RDS RT STTUNEDkHzMHz Adjusting Display BrightnessYou can adjust the brightness of the display on the main unit so it wont interfere with your movie viewing.Press DIMMERbutton. MISCELLANEOUS 63 • SLEEP will be displayed. Each time the button is pressed the preset time changes as follows: 10 ➝20 ➝30 ➝60 ➝90 ➝120 ➝150 ➝OFF. TITLE CHAP PRGM RDS RT STTUNEDkHzMHz Press SLEEPbutton. Sleep Timer FunctionYou can set the time that the DVD player will shut itself off. Convenient Functions •‘MUTE’ flash in the display.•To switch the sound back on (at the same volume as before), press MUTEagain or the VOLUMEbuttons.Mute FunctionThis is useful when answering a doorbell or telephone call.Press MUTEbutton. •The remaining time before the DVD player will shut itself off is displayed.•Pressing the button again changes the sleep time from what you have set earlier.To confirm the sleep timer setting, press SLEEPbutton. To cancel the sleep timer, press SLEEPbutton until OFF appears on the display. Using HeadphonesUse headphones (not supplied) for private listening pleasure.Connect the headphones to the PHONES jack for private listening.•To prevent hearing damage, do not increase the volume excessively when using headphones.Caution
GB Operating a TV with the Remote Control •The remote control may not work on some brands of TVs. Also some operations may not be possible depending on your brand of TV.•If you do not set the remote control with the code for your brand of TV, the remote control will work on a Samsung TV by default. When operating a TV with the remote control1 Press the MODEbutton to make the TV indicator on the remote control flash. 2 Press POWERbutton to turn on the TV. 3 Point the remote control toward the TV. 4 While holding down POWER, enter the code corresponding to your brand of TV.•If the code matches the TVs code, the TV will be turned off.•If there is more than one code listed for your TV in the table, enter one at a time to determine which code works. Example: For a Samsung TV While holding down POWER, use the number buttons to enter 00, 01, 02, 03, 04, and 05.•You can use the TV POWER, VOLUME, CHANNEL, and Numeric buttons (0~9). 5 Point the remote control toward the TV and press POWER. If the TV turns off or on, the setting is complete. TV DVD RECEIVER Note 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 SAMSUNG ANAM DAEWOO LG HITACHI JVC SHARP SONY TOSHIBA SANYO MITSUBISHI MATSUSHITA TELEFUNKEN RCA PANASONIC SABA PHILIPS GRUNDIG ZENITH MIVAL NOBLEX EMERSON MAGNAVOX LOEWE THOMSON NORDMENDE LOEWE OPTA BLAUPUNKT SIEMENS TV Brand Code ListNo. Brand Code 00(Initial Value), 01, 02, 03, 04, 05, 73 06~11, 59 12~18, 20, 21 05, 20, 21, 22, 53 23, 40, 41, 49 24, 55 27, 33, 34, 35, 54 27, 36 27, 37, 42, 43, 44, 46 27, 30, 31, 32 05, 27, 28 09, 26 41, 49, 51, 57 29, 61 07, 09, 26, 48, 49, 50 40, 41, 47, 48, 49 05, 45, 47, 64, 65, 66, 67, 68, 69 39, 42, 46, 70, 71, 72 38 52 56 19 25 05, 60 40, 41, 49, 62, 63 40, 41, 49 36, 47, 05 39 39 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 BRANDT FERGUSON PIONEER TELEAVA FINLUX FISHER AKAI YOKO PHONOLA RADIOLA SCHNEIDER NEWSAN CONTINENTAL EDISON SALORA SELECO NOKIA REX MIVAR IMPERIAL CGE BANG & OLUFSEN BRIONVEGA FORMENTI METZ WEGA RADIOMARELLI SINGER SINUDYNE No. Brand Code41 41 41, 48, 74 41 05, 42, 47 31 31 05 05, 45, 47 05, 45 05 58 49 48 48 48 48 46 46 46 47 47 47 47 47 47 47 47 66 MISCELLANEOUS 65
GB 68 • Is the TV power on?• Are the video cables connected properly?• Is the disc dirty or damaged?• A poorly manufactured disc may not be playable. • Disc is rotating but no picture is produced. • Picture quality is poor and picture is shaking. • Is the remote control being operated within its operation range of angle and distance?• Are the batteries exhausted? The remote control does not work. • Audio language and subtitles will not work for DVDs not containing them. And depending on the disc, they may work differently. Audio language and subtitles do not work. • Are you using a disc that does not contain menus? Menu screen does not appear even when the menu function is selected. • While “NO DISC” message appears on the display of main unit, hold the main units button for longer than 5 seconds. “INITIALIZE” appears on the display and all settings will return to the default values.• Press the POWER button. Using the RESET function will erase all stored settings. Do not use this unless necessary.• Turn off the power and hold the button on the main unit for longer than 5 seconds. Using the RESET function will erase all stored settings. Do not use this unless necessary. The password for rating level has been forgotten. • The main unit is not working. (Example: The power goes out or strange noise is heard.)• The DVD player is not working normally. • Is the antenna connected properly?• If the antennas input signal is weak, install an external FM antenna in an area with good reception. Cant receive radio broadcast. Symptom Check/Remedy • You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3 ratio only. Refer to the DVD disc jacket and then select the appropriate function. Aspect ratio cannot be changed. MISCELLANEOUS 67 • Is the power cord plugged securely into the outlet?• Turn off the power and then turn it back on.• Check the region number of the DVD. DVD discs purchased from abroad may not be playable.• CD-ROMs and DVD-ROMs cannot be played on this DVD player.• Make sure that the rating level is correct.• Are you using a deformed disc or a disc with scratches on the surface?• Wipe the disc clean. Disc tray does not open. Playback does not start. Playback does not start immediately when the Play/Pause button is pressed. • No sound is heard during fast playback, slow playback, and step motion playback.• Are the speakers connected properly? Is the speaker setup correctly customized?• Is the disc severely damaged? Sound is not produced. Sound can be heard only from a few speakers and not all six. • Was the DVD player suddenly moved from a cold place to a warm one? When condensation forms inside the player, remove the disc and let the player stand for 1 or 2 hours with the power on. (You can use the player again after condensation disappears.)• When listening to a CD or radio, sound is output to the front speakers (L/R) only. Select PRO LOGIC II by pressing (Dolby Pro Logic II) on the remote control to use all six speakers.• Make sure that the DVD disc is 5.1-CH compatible.• If you set C, SL, and SR to NONE in the speaker mode in the audio setup of the setup screen, no sound is heard from the center speaker and the front left and right speakers. Set C, SL, and SR to SMALL. Picture does not appear, sound is not produced, or the disc tray opens 2 to 5 seconds later. • Is there Dolby Digital 5.1 CH mark on the disc? Dolby Digital 5.1 CH Surround Sound is produced only if the disc is recorded with 5.1 channel sound.• Is the audio language correctly set to DOLBY DIGITAL 5.1-CH in the information display? Dolby Digital 5.1 CH Surround Sound is not produced. Symptom Check/Remedy Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact the nearest authorized dealer or Samsung Electronics Service Center.Before Calling for Service
GB 70 MISCELLANEOUS Code Language Code Language Code Language Code Language1027 Afar 1181 Frisian 1334 Latvian, Lettish 1506 Slovenian 1028 Abkhazian 1183 Irish 1345 Malagasy 1507 Samoan 1032 Afrikaans 1186 Scots Gaelic 1347 Maori 1508 Shona 1039 Amharic 1194 Galician 1349 Macedonian 1509 Somali 1044 Arabic 1196 Guarani 1350 Malayalam 1511 Albanian 1045 Assamese 1203 Gujarati 1352 Mongolian 1512 Serbian 1051 Aymara 1209 Hausa 1353 Moldavian 1513 Siswati 1052 Azerbaijani 1217 Hindi 1356 Marathi 1514 Sesotho 1053 Bashkir 1226 Croatian 1357 Malay 1515 Sundanese 1057 Byelorussian 1229 Hungarian 1358 Maltese 1516 Swedish 1059 Bulgarian 1233 Armenian 1363 Burmese 1517 Swahili 1060 Bihari 1235 Interlingua 1365 Nauru 1521 Tamil 1069 Bislama 1239 Interlingue 1369 Nepali 1525 Tegulu 1066 Bengali; Bangla 1245 Inupiak 1376 Dutch 1527 Tajik 1067 Tibetan 1248 Indonesian 1379 Norwegian 1528 Thai 1070 Breton 1253 Icelandic 1393 Occitan 1529 Tigrinya 1079 Catalan 1254 Italian 1403 (Afan) Oromo 1531 Turkmen 1093 Corsican 1257 Hebrew 1408 Oriya 1532 Tagalog 1097 Czech 1261 Japanese 1417 Punjabi 1534 Setswana 1103 Welsh 1269 Yiddish 1428 Polish 1535 Tonga 1105 Danish 1283 Javanese 1435 Pashto, Pushto 1538 Turkish 1109 German 1287 Georgian 1436 Portuguese 1539 Tsonga 1130 Bhutani 1297 Kazakh 1463 Quechua 1540 Tatar 1142 Greek 1298 Greenlandic 1481 Rhaeto-Romance 1543 Twi 1144 English 1299 Cambodian 1482 Kirundi 1557 Ukrainian 1145 Esperanto 1300 Kannada 1483 Romanian 1564 Urdu 1149 Spanish 1301 Korean 1489 Russian 1572 Uzbek 1150 Estonian 1305 Kashmiri 1491 Kinyarwanda 1581 Vietnamese 1151 Basque 1307 Kurdish 1495 Sanskrit 1587 Volapuk 1157 Persian 1311 Kirghiz 1498 Sindhi 1613 Wolof 1165 Finnish 1313 Latin 1501 Sangro 1632 Xhosa 1166 Fiji 1326 Lingala 1502 Serbo-Croatian 1665 Yoruba 1171 Faeroese 1327 Laothian 1503 Singhalese 1684 Chinese 1174 French 1332 Lithuanian 1505 Slovak 1697 Zulu Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu” (See page 39).Language Code List 69 Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints will not get on the surface. Do not stick paper or tape on the disc. Do not keep in direct sunlightKeep in a cool ventilated areaKeep in a clean Protection jacket. Store vertically. When you get fingerprints or dirt on the disc, clean it with a mild detergent diluted in water and wipe with a soft cloth.• When cleaning, wipe gently from the inside to the outside of the disc. Handling discsDisc StorageHandling and Storing Discs • Do not allow the discs to become contaminated with dirt.• Do not load cracked or scratched discs. Caution • Condensation may form if warm air comes into contact with cold parts inside the player. When condensation forms inside the player, the player may not operate correctly. If this occurs, remove the disc and let the player stand for 1 or 2 hours with the power on.Note Small scratches on the disc may reduce sound and picture quality or cause skipping. Be especially careful not to scratch discs when handling them.Cautions on Handling and Storing Discs
GB Power Consumption Weight Dimensions (W x H x D) Operating Temperature Range Operating Humidity Range Usable Sensitivity S/N Ratio Distortion Usable Sensitivity S/N Ratio Distortion Composite Video Scart Jack Component Video Front speaker output Center speaker output Rear speaker output Subwoofer speaker output Frequency range S/N Ratio Channel separation Input sensitivity G E N E R A L T U N E R F M T U N E R A MV I D E OO U T P U TA M P L I F I E R Specifications 72 MISCELLANEOUS 71 80W 3.5Kg 430 x 60 x 340 mm +5°C~+35°C 10%~75% 10dB 60dB 0.5% 55dB 40dB 2% 1.0Vp-p(75Ωload) Compositive Video : 1.0Vp-p(75Ωload) RGB Signal : 0.714Vp-p(75Ωload) Y:1.0Vp-p(75Ωload) Pr:0.70Vp-p(75Ωload) Pb:0.70Vp-p(75Ωload) 75W(4Ω)/CH 80W(4Ω) 75W(4Ω)/CH 120W(3Ω) 20Hz~20kHz 75dB 70dB (AUX)500mV Impedance Frequency range Output sound pressure level Rated input Maximum input Dimensions (W x H x D) Weights S P E A K E R 5.1ch speaker system Front/Rear speaker 4Ωx 4 150Hz~20kHz 85dB/W/M 75W 150W 85.5 x 156 x 98 mm 0.5 Kg / 0.35 Kg Center speaker 4Ω 150Hz~20kHz 85dB/W/M 80W 160W 300 x 85.5 x 98 mm 0.65 Kg Subwoofer speaker 3Ω 30Hz~150Hz 86dB/W/M 120W 240W 160 x 320 x 400 mm 5.2 Kg Speaker system (PS-UP30) HT-UP30HT-TP33 Impedance Frequency range Output sound pressure level Rated input Maximum input Dimensions (W x H x D) Weights S P E A K E R 5.1ch speaker system Front/Rear speaker 4Ωx 4 145Hz~20kHz 85dB/W/M 75W 150W 85 x 1050 x 90 mm 3.1 Kg / 2.95 Kg Center speaker 4Ω 145Hz~20kHz 85dB/W/M 80W 160W 295 x 90 x 94 mm 0.7 Kg Subwoofer speaker 3Ω 35Hz~140Hz 86dB/W/M 120W 240W 180 x 320 x 400 mm 5.2 Kg Speaker system (PS-TP33)