Samsung Ht Q100 Instruction Manual
Have a look at the manual Samsung Ht Q100 Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
2 Press the FUNCTION button on the main unit or the USBbutton on the remote control to select the USB mode. •“USB” appears on the display screen and then disappears.•USB MENUscreen appears on the TV screen and the saved file is played. 1 Connect the USB device to the USB port on the side of the unit. To stop playback, press the STOP( ) button. 40 39 Fast playback Skip Forward/BackDuring playback, press the button.•When there is more than one file, when you press the button, the next file is selected.•When there is more than one file, when you press the button, the previous file is selected.To play back the disc at a faster speed, press or during playback.•Each time you press either button, the playback speed will change as follows: 2x ➞4x ➞8x ➞32x ➞Normal.You can enjoy media files such as pictures, movies and music saved in an MP3 player, USB memory or digital camera in high quality video with 5.1 channel home theater sound by connecting the storage device to the USB port of the home theater.Safe USB RemovalTo prevent damage to the memory stored in the USB device, perform safe removal before disconnecting the USB cable.(1) Press the Stop button twice in a row. The display will show REMOVE➞USB. (2) Remove the USB cable. Compatible Devices1. USB devices that support USB Mass Storage v1.0. (USB devices that operate as a removable disk in Windows (2000 or later) without additional driver installation.) 2. MP3 Player: HDD and flash type MP3 players. 3. Digital camera: Cameras that support USB Mass Storage v1.0. •Cameras that operate as a removable disk in Windows (2000 or later) without additional driver installation. 4. USB HDD and USB Flash Drive: Devices that support USB2.0 or USB1.1. •You may experience a difference in playback quality when you connect a USB1.1 device.•For a USB HDD, make sure to connect an auxiliary power cord to the USB HDD for proper operation. 5. USB card Reader: One slot USB card reader and Multi slot USB card reader •Depending on the manufacturer. the USB card reader may not be supported.•If you install multiple memory devices into a multi card reader, you may experience problems. 6. If you use a USB extension cable, the USB device might not be recognized.●Supported Formats•CBI (Control/Bulk/Interrupt) is not supported.•Digital Cameras that use PTP protocol or require additional program installation when connected to a PC are not supported.•Adevice using NTFS file system is not supported. (Only FAT 16/32 (File Allocation Table 16/32) file system is supported.)•Some MP3 players, when connected to this product,may not operate depending on the sector size of their file system.•The USB HOST function is not supported if a product that transfers media files by its manufacturer-specific program is connected. •Does not operate with Janus enabled MTP(Media Transfer Protocol) devices.•The USB host function of this product does not support all USB devices. For information on the supported devices, see pages 65. Playing Media Files using the USB HOST feature ENGOPERATION File nameFile Bit rate Version PixelSampling extension Frequency Still PictureJPG JPG .JPEG – – 640*480 – MusicMP3 .MP3 80~384kbps – – 44.1kHz WMA .WMA 56~128kbps V8 – 44.1kHz MovieWMV .WMV 4Mbps V1,V2,V3,V7 720*480 44.1KHz~48KHz DivX .AVI,.ASF 4Mbps DivX3.11~DivX5.1,Xvid 720*480 44.1KHz~48KHz 1p~40p(Q100)-XAA 2006.5.29 1:45 PM Page 42
42 41 •The selected file will be played.•When playing an MP3 or JPEG disc, you cannot use , to move to a folder. To move a folder, press (Stop) and then press , . ENG DVD CD MP3 JPEG 2 Press Cursor , buttons or numeric buttons to select the desired title/track and then press ENTERbutton. 1 Press INFObutton.01/05 001/040 0:00:37 1/1 03/05 001/002 0:00:01 1/1 01/05 001/0400:00:01 1/1 Moving to a Title/Track 4 Press Cursor , but- tons or numeric buttons to select the desired chapter and then press ENTERbut- ton.01/05 025/0400:00:01 1/1 Moving to a Chapter 6 Press the numeric buttons to select the desired time and then press ENTERbutton.01/05 028/0401:30:001/1 Moving to a Specific Time3 Press Cursor , buttons to move to Chapter ( ) display. Moving to a Chapter 01/05 025/0401:17:301/1 5 Press Cursor , buttons to move to time display. Moving to a Specific Time Press the numeric buttons. •You can press on the remote control to move directly to the desired title, chapter, or track.•Depending on the disc, you may not be able to move to the selected title or time.Note OPERATION Moving Directly to a Scene/Song 2 Press Cursor , button to move to ‘Title Menu’. DVD 1 In Stop mode, press MENUbut- ton. 3 Press ENTERbut- ton. •The title menu appears. Press MENUbutton to exit the setup screen. DVD 2•When you select Disc Menu and it is not supported by the disc, the This menu is not sup- ported message appears on the screen. 1 In Stop mode, press MENU button. Press Cursor , buttons to move to ‘DISC MENU’ and then press ENTERbutton. 3•Press ENTER button. Press Cursor , , buttons to select the desired item. You can use the menus for the audio language, subtitle language, profile, etc. DVD menu contents differ from disc to disc.Using Disc MenuFor DVDs containing multiple titles, you can view the title of each movie. Depending on the disc, the availability of this feature may vary.Using the Title Menu •Disc menu display may be different depending on the disc. Note •Title menu display may be different depending on the disc.ENTER MOVE EXIT ENTER MOVE EXIT ENTER MOVE EXIT ENTER MOVE EXIT Note 1p~40p(Q100)-XAA 2006.5.29 1:45 PM Page 44
ENG 44 SETUP OSD (On-Screen Display) language is set to English by default.Setting the Language43 *If the language you selected is not recorded on the disc, menu language will not change even if you set it to your desired language. Selecting the OSD LanguageSelecting the Audio Language (record- ed on the disc) 2 1 In Stop mode, press MENU button. Press Cursor but- ton to move to ‘Setup’and then press ENTERbutton. 4 •Once the setup is complete, the OSD will be English if English has been selected as language. 3 Selecting the Subtitle Language (recorded on the disc) Selecting the Disc Menu Language (recorded on the disc) Select ‘Language’ and then press ENTERbutton 5 Press Cursor , button to select ‘OSD Language’and then press ENTERbutton. Press Cursor , but- ton to select the desired language and then press ENTERbutton. Press RETURNbutton to return to the previous level. Press MENUbutton to exit the setup screen. • To select another language, select OTHER and enter the language code of your country. (See page 64 for language codes) AUDIO, SUB TITLE and DISC MENU language can be selected. Note MOVE ENTER EXIT MOVE ENTER EXIT MOVE ENTER EXITRETURN MOVE ENTER EXITRETURN RETURN ENTER MOVE EXIT RETURNENTER MOVE EXIT RETURNENTER MOVE EXIT RETURN MOVEEXIT MOVE SELECT EXITRETURN ENTER MOVE SELECT EXITRETURN 41~64p(Q100)-XAA 2006.5.29 1:39 PM Page 2
45 2 1 4 3 In Stop mode, press MENU button. Press Cursor button to move to ‘Setup’ and then press ENTERbutton. •Once the setup is complete, you will be taken to the previous screen. Press Cursor but- ton to move to ‘TV DISPLAY’ and then press ENTERbutton. Press Cursor , button to select the desired item and then press ENTERbutton. Press RETURNbutton to return to the previous level. Press MENUbutton to exit the setup screen. Depending on your TV type (Wide Screen or conventional 4:3), you can select the TVs aspect ratio.Setting TV Screen type ENG 46 SETUP The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of widescreen and high definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different screen sizes, you should adjust the aspect ratio to fit your TV or monitor. •For a standard TV, select either 4:3LB or 4:3PS option according to personal preference. Select 16:9 if you have a widescreen TV. : Select this to view a 16:9 picture in the full-screen mode on your widescreen TV.• You can enjoy the widescreen aspect.: Select this to play a 16:9 picture in the letter box mode on a conventional TV.• Black bars will appear at the top and bottom of the screen.: Select this to play a 16:9 picture in the pan & scan mode on a conventional TV.•You can see the central portion of the screen only (with the sides of the 16:9 picture cut off). 4:3LB (4:3 Letterbox) WIDE4:3PS (4:3 Pan&Scan) • If a DVD is in the 4:3 ratio, you cannot view it in widescreen. • Since DVD discs are recorded in various image formats, they will look different depending on the software, the type of TV, and the TV aspect ratio setting. NoteAdjusting the TV Aspect Ratio (Screen Size) ENTER MOVE EXITENTER MOVE EXIT ENTER RETURN MOVE EXITSELECT RETURN MOVE EXIT 41~64p(Q100)-XAA 2006.5.29 1:39 PM Page 4
ENG •This function works only if a DVD disc contains the rating level information. Press RETURNbutton to return to the previous level. Press MENUbutton to exit the setup screen. 4 •The password is set to 7890 by default.•Once the setup is complete, you will be taken to the previous screen. •If you have selected Level 6, you can- not view DVDs with Level 7 or higher.•The higher the level, the closer the content is to violent or adult material. 3 5 Press Cursor button to move to ‘PARENTAL’ and then press ENTERbutton. Press Cursor , but- ton to select the desired rating level and then press ENTERbutton. Enter the password and then press ENTERbutton. Note SETUP 47 2 1 In Stop mode, press MENU button. Press Cursor button to move to ‘Setup’ and then press ENTERbutton. Use this to restrict playback of adult or violent DVDs you do not want children to view.Setting Parental Controls (Rating Level) 4 •Enter the old password, a new pass- word, and confirm new password.•The setting is complete. 3 5 Press Cursor button to move to ‘PASSWORD’ and then press ENTER button. Press ENTER button.Enter the password and then press ENTERbutton. 2 1 Press MENUbutton. Press Cursor button to move to ‘Setup’ and then press ENTERbutton. •The password is set to 7890 by default. NoteIf you have forgotten the rating level password, do the following:• While the player is in the no disc mode, hold the main units button for longer than 5 seconds. “INITIALIZE” appears on the display and all settings will return to the default values.• Press the POWER button. Using the RESET function will erase all stored settings. Do not use this unless necessary. You can set the password for the Parental (rating level) setting.Setting the Password 48 ENTER MOVE EXIT ENTER RETURN MOVEEXIT SELECT RETURN MOVEEXIT RETURN INPUT NUMBEREXIT ENTER MOVEMOVE ENTEREXITMOVE ENTER EXIT EXIT MOVE ENTER RETURNEXITMOVE SELECT RETURNEXIT RETURN INPUT NUMBEREXIT 41~64p(Q100)-XAA 2006.5.29 1:39 PM Page 6
49 DVD JPEG Select this to set the Samsung Logo image as your wallpaper.Select this to set the desired image as your wallpaper. •“COPY LOGO DATA” will be dis- played on the TV screen. •This selects one of the 3 wallpa- per screens •The selected wallpaper will be displayed. •You can select up to 3 wallpaper settings. 2 13 During playback, press PLAY/PAUSEbutton when an image you like appears. Press LOGO button. The power will turn off and then back on.PAUSECOPY LOGO DATA Setting the WallpaperWhile watching a DVD or JPEG CD, you can set the image you like as background wallpaper.Setting the Wallpaper MOVE SELECT RETURN EXITMOVE SELECT RETURN EXIT ENG 50 SETUP 2 1 3 In Stop mode, press MENU button. Press Cursor button to move to ‘Setup’ and then press ENTERbutton.Press Cursor button to move to ‘LOGO’ and then press ENTERbutton. To select one of the 3 wallpaper settings youve made 5 4 Press MENU button to exit the setup screen. Press to select the desired ‘USER’, and then press ENTER. Press RETURNbutton to return to the previous level. Press MENUbutton to exit the setup screen. MOVE ENTEREXITMOVE ENTEREXIT MOVE ENTER RETURN EXIT MOVE SELECT RETURN EXIT 41~64p(Q100)-XAA 2006.5.29 1:39 PM Page 8
ENGSETUP 2 1 Press theEJECT button and then press theMENU button. Press Cursor button to move to ‘Setup’ and then press ENTERbutton. 4 3 Press Cursor button to move to ‘DVD TYPE’ and then press ENTERbutton. Press Cursor , button to move to ‘DVD VIDEO’ and then press ENTERbutton. • DVD Play mode is set to DVD Audio as factory default setting.• Powering off the main unit will automatically switch to the DVD Audio mode.Note •Set steps 1 ~ 4 again if you want to switch to DVD AUDIO Play mode. When Selecting DVD Play Mode:•DVD VIDEO: set to play the DVD video contents contained on a DVD audio disc.•DVD AUDIO: set to play the default DVD audio. Some DVD-Audio discs contain DVD-Video as well as DVD-Audio. To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode.DVD Playback Mode •Please use the Registration code to register this player with the DivX (R) video on demand format. To learn more, go to www.divx.com/vod. DivX (R) registration MOVE ENTEREXITMOVE ENTEREXIT MOVE ENTER RETURN RETURNEXIT MOVE SELECT RETURNEXIT MOVEENTEREXIT 51 52 12 In Stop or no disc mode, press MENUbutton. Press Cursor button to move to ‘Audio’ and then press ENTER button. •When the Cursor button is pressed, the effect is greater, and when the Cursor button is pressed, the effect is smaller. 34 Press Cursor button to move to ‘DRC’ and then press ENTER button. Press Cursor , to adjust the ‘DRC’. Press RETURNbutton to return to the previous level. Press MENUbutton to exit the setup screen. This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.Setting the DRC (Dynamic Range Compression)MOVE ENTER RETURN EXITCHANGE RETURN EXITMOVE ENTER EXIT MOVE ENTER EXIT 41~64p(Q100)-XAA 2006.5.29 1:39 PM Page 10
ENG 54 Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to to match the video.AV SYNC Setup Press RETURNbutton to return to the previous level. Press MENUbutton to exit the setup screen. 2 1•Setup menu appears. 3 Press Cursor , buttons to move to ‘Audio’ and then press ENTERbutton. Press Cursor , buttons to move to ‘AV-SYNC’ and then press ENTERbutton. Press the MENUbutton. 4•You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status. Press Cursor , buttons to select the AV-SYNC Delay Time and then press the ENTERbutton. MOVE ENTER EXIT MOVE ENTER RETURN EXITMOVE SELECT RETURN EXIT MOVE ENTER EXIT 53 2 1 Tune in to the desired station. Press the TUNER button to select the FM band. Automatic Tuning 2Manual Tuning2 1 Select a broadcast station. Press the STOP( ) button to select PRESET and then press button to select the preset station. Automatic Tuning 1 Press the Function button to select the FM band. Press the STOP ( ) button to selec MANUAL and then press and hold button to automatically search the band. Automatic Tuning 2 Press STOP ( ) to select MANUAL and then briefly press to tune in to a lower or higher frequency. Manual Tuning •Each time the button is pressed, the sound switches between STEREO and MONO.•In a poor reception area, select MONO for a clear, interference-free broadcast. Press MO/STbutton to listen in Mono/Stereo. (This applies only when listening to an FM station.) When is pressed, a preset broadcast station is selected. Press and hold TUNING/CHto automatically search for active broadcasting stations. Briefly press TUNING/CHto increase or decrease the frequency incrementally. Automatic Tuning 1 Remote Control UnitMain Unit Listening to Radio RADIO OPERATION 41~64p(Q100)-XAA 2006.5.29 1:39 PM Page 12
ENG 56 To tune in to a preset station, press on the remote control to select a channel.•Refer to Step 2 on page 54 to automatically or manually tune in to a station. • Press the TUNER MEMORYbutton before ‘number’ disappears from the display.• ‘number’ disappears from the display and the station is stored in memory. •“1” flashes in the display. 25 Press TUNING/CHto select 89.10.Press the TUNER MEMORY button again. 6 To preset another station, repeat steps 2 to 5. RADIO OPERATION 1 Press the TUNER button to select the FM band. •You can select between 1 and 15 presets. 4 Press to select preset number. 3 Press the TUNER MEMORYbutton. Example: Presetting FM 89.1 in the memory Presetting Stations55 •This unit does not receive AM broadcasts. Note 41~64p(Q100)-XAA 2006.5.29 1:39 PM Page 14
ENG 58 MISCELLANEOUS 57Convenient Functions •Each time the button is pressed, the selection changes as follows: VIRTUAL SOUND ONE ➞VIRTUAL SOUND TWO➞VIRTUAL SOUND OFF.V-SOUND(Virtual Sound)The 2-channel sounds can be listened with virtual effects for produc- ing much more realistic sounds as in 5.1 channels.Press V-SOUNDbutton.Virtual Headphone FunctionUse headphones (not supplied) for private listening pleasure. You can enjoy dynamic sound effects similar to that of 5.1 channel surround sound using conventional stereo headphones. •Do not listen at extremely high volume levels when using headphones. Extended, high-volume listening can lead to permanent hearing loss. Note •You can purchase headphones from most Electronics stores. 1 Plug the headphones into the headphone jack. •Each time the button is pressed, the selection alternates between V.HP and OFF.•V.HP(VIRTUAL HEADPHONE ON) : Select to enjoy a 5.1-channel surround sound that gives the feeling of being in a baseball park or concert hall.•OFF(VIRTUAL HEADPHONE OFF) :Select to listen to a standard 2-channel stereo sound. 2 Press V-H/Pbutton. •Each time the button is pressed, the brightness changes as follows: DARK➞BRIGHT.Adjusting Display BrightnessYou can adjust the brightness of the display on the main unit so it wont interfere with your movie viewing.Press DIMMERbutton.• will be displayed. Each time the button is pressed, the preset time changes as follows: 10 ➝20 ➝30 ➝60 ➝90 ➝120 ➝150 ➝OFF.Press SLEEPbutton. Sleep Timer FunctionYou can set the time that the Home Theater will shut itself off. Convenient Functions •The remaining time before the Home Theater will shut itself off is displayed.•Pressing the button again changes the sleep time from what you have set earlier.To confirm the sleep timer setting, press SLEEPbutton.To cancel the sleep timer, press SLEEPbutton until OFF appears on the display.• appears in the display. •To restore the sound, press the button again.Mute FunctionThis is useful when answering a doorbell or telephone call.Press MUTEbutton. 41~64p(Q100)-XAA 2006.5.29 1:39 PM Page 16