Samsung Ht P1200 Instruction Manual

							39
21
43
In Stop mode,
press MENU
button.Press Cursor
button to move to
‘Setup’ and then
press ENTERbutton.
•Once the setup is complete, you will
be taken to the previous screen.
Press Cursor
button to move to ‘TV
DISPLAY’ and then
press ENTERbutton.Press Cursor      ,
button to select the
desired item and then
press ENTERbutton.
Press RETURNbutton to return to the previous level.
Press MENUbutton to exit the setup screen.
Depending on your TV type (Wide Screen  or conventional 4:3), you can select the TVs aspect ratio.
Setting TV Screen typeGB
40
SETUP
The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of widescreen and high
definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different
screen sizes, you should adjust the aspect ratio to fit your TV or monitor.
•For a standard TV, select either 4:3LB or 4:3PS option according to personal preference. 
Select 16:9 if you have a widescreen TV.
: Select this to view a 16:9 picture in the full-screen
mode on your widescreen TV.
• You can enjoy the widescreen aspect.
: Select this to play a 16:9 picture in the letter box
mode on a conventional TV.
• Black bars will appear at the top and bottom of the screen.
: Select this to play a 16:9 picture in the pan & scan
mode on a conventional TV.
•You can see the central portion of the screen only (with the
sides of the 16:9 picture cut off).
4:3LB(4:3 Letterbox)
WIDE
4:3PS
(4:3 Pan&Scan)
• If a DVD is in the 4:3 ratio, you cannot view it in widescreen.
• Since DVD discs are recorded in various image formats, they will look different depending on
the software, the type of TV, and the TV aspect ratio setting.Note
Adjusting the TV Aspect Ratio (Screen Size)
 
						

							GB
•This function works only if a DVD disc contains the rating level information.
Press RETURNbutton to return to the previous level.
Press MENUbutton to exit the setup screen.
4
•The password is set to 7890 by default.
•Once the setup is complete, you will be
taken to the previous screen.•If you have selected Level 6, you
cannot view DVDs with Level 7 or
higher.
•The higher the level, the closer the
content is to violent or adult material.
35
Press Cursor
button to move to
‘PARENTAL’ and then
press ENTERbutton.Press Cursor      ,      button
to select the desired rating
level and then press
ENTERbutton.Enter the password
and then press
ENTERbutton.
Note
SETUP
41
21
In Stop mode,
press MENU
button.Press Cursor
button to move to
‘Setup’ and then
press ENTERbutton.
Use this to restrict playback of adult or violent DVDs you do not want children to view.
Setting Parental Controls (Rating Level)
4
•Enter the old password, a new
password, and confirm new password.
•The setting is complete.
35
Press Cursor      button to
move to ‘PASSWORD’
and then press ENTER
button.
Press ENTER
button.Enter the password
and then press
ENTERbutton.
21Press MENUbutton.
Press Cursor
button to move to
‘Setup’ and then
press ENTERbutton.
•The password is set to 7890 by default.Note
If you have forgotten the rating level password, do the following:
• While the player is in the no disc mode, hold the main units          button for longer than 5 seconds. “INITIALIZE” appears
on the display and all settings will return to the default values.
• Press the POWER button.
Using the RESET function will erase all stored settings. 
Do not use this unless necessary.
You can set the password for the Parental (rating level) setting.
Setting the Password
42
 
						

							GB
44
SETUP
213
In Stop mode,
press MENU
button.Press Cursor
button to move to
‘Setup’ and then
press ENTERbutton.Press Cursor
button to move to
‘LOGO’ and then
press ENTERbutton.
To select one of the 3 wallpaper settings youve made
54
Press MENU
button to exit the
setup screen.Press      to select
the desired ‘USER’,
and then press
ENTER.
Press RETURNbutton to return to the previous level.
Press MENUbutton to exit the setup screen.
43
Select this to set the
Samsung Logo image as
your wallpaper.Select this to set the desired
image as your wallpaper.
•“COPY LOGO DATA” will be
displayed on the TV screen.
•The selected wallpaper will be
displayed. 
•You can select up to 3 wallpaper
settings.
21
3
During playback, press
PLAY/PAUSEbutton
when an image you
like appears.Press LOGO
button.
The power will
turn off and then
back on.
PAUSECOPY LOGO DATA
Setting the Wallpaper
While watching a DVD, VCD or JPEG CD, you can set the image you like as background wallpaper.
Setting the WallpaperDVDVCDJPEG
 
						

							GB
46
SETUP
21
43
In Stop mode,
press MENU
button.Press Cursor
button to move to
‘Audio’ and then
press ENTERbutton.
In the Speaker
Setup, press the
ENTERbutton again.Press Cursor     ,     , 
,    buttons to move
to the desired
speaker and then
press ENTERbutton.
•For C, LS, and RS, each time the button
is pressed, the mode switches
alternately as follows: SMALL 
➝ NONE.
•For L and R, the mode is set to SMALL.
45
SMALL: Select this when using the speakers.
NONE: Select this when no speakers are connected.
•Depending on PRO LOGIC and STEREO settings, the speaker mode may vary (see page 55).
Note
Signal outputs and frequency responses from the speakers will automatically be adjusted according to your
speaker configuration and whether certain speakers are used or not.
Setting the Speaker Mode
21
Press the MENU
button while the
disc tray is open.Press Cursor
button to move to
‘Setup’ and then
press ENTERbutton.
43
Press Cursor
button to move to
‘DVD TYPE’ and then
press ENTERbutton.Press Cursor     ,
button to move to
‘DVD VIDEO’ and then
press ENTERbutton.
•DVD Play mode is set to DVD Audio
as factory default setting.
Note
•Set steps 1 ~ 4 again if you want to
switch to DVD AUDIO Play mode. 
When Selecting DVD Play Mode:
•DVD VIDEO: set to play the DVD video
contents contained on a
DVD audio disc.
•DVD AUDIO: set to play the default
DVD audio.
Some DVD-Audio discs contain DVD-Video as well as DVD-Audio.
To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode.
DVD Audio Disc Playback Mode
•Please use the Registration code to register this player 
with the DivX (R) video on demand format. To learn more,  
go to www.divx.com/vod.
DivX (R) registration
 
						

							47
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can enjoy the best sound if
the distance between you and each speaker is the same. Since the sounds
arrive at the listening position at different times depending on the
placement of speakers, you can adjust this difference by adding a delay
effect to the sound of the Center Speaker and Surround Speakers.
21
In Stop mode,
press MENU
button.Press Cursor     button
to move to ‘Audio’ and
then press ENTER
button.
•With           (Dolby Pro Logic II), the delay time may be different for each mode.
•With AC-3 and DTS, the delay time can be set between 00 and 15mSEC.
•The Center channel is only adjustable on 5.1 channel discs.
Note
If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of
the audio signals from the center and rear speakers.
Setting the Delay TimeGB
48
Df: The distance from FRONT SPEAKER
Dc: The distance from CENTER SPEAKER
Ds: The distance from SURROUND SPEAKER
Ideal CENTER
SPEAKER placement
It is desirable to place all speakers within this circle.Ideal
SURROUND
SPEAKER
placement
SETUP
•You can set the delay time for C
between 00 and 05mSEC and for
LS and RS between 00 and
15mSEC.
435
Press Cursor      button
to move to ‘DELAY
TIME’ and then press
ENTERbutton.Press Cursor     ,     , 
,    buttons to move
to the desired speaker
and then press
ENTERbutton.
Press Cursor     ,
to set the Delay
time.
0 ms
3 ms 
6 ms
9 ms
12 ms
15 ms
• Setting REAR (SURROUND) SPEAKERS
If the distance of Df is equal to the distance of Ds
in the figure, set the mode as 0ms. Otherwise,
change the setting according to the table. • 
Setting CENTER SPEAKER
If the distance of Dc is equal to or longer than the
distance of Df in the figure, set the mode as 0ms.
Otherwise, change the setting according to the table.
Distance between Df and Dc  Delay Time
Delay Time
0 ms
1 ms 
2 ms
3 ms
4 ms
5 ms
Distance between Df and Ds
0.00 m 
0.34 m
0.68 m
1.02 m
1.36 m
1.70 m
0.00 m 
1.02 m
2.04 m
3.06 m
4.08 m
5.10 m
 
						

							L: Front Speaker (L) C: Center Speaker SW: Subwoofer 
R: Front Speaker (R) LS: Rear Speaker (L) RS: Rear Speaker (R)
Press RETURNbutton to return to the previous level.
Press MENUbutton to exit the setup screen.
2
1
In Stop or no
disc mode,
press MENU
button.
Press Cursor
button to move to
‘Audio’ and then
press ENTERbutton.
3
Press Cursor      button
to move to ‘TEST
TONE’ and then press
ENTERbutton.
•The test tone will be sent to L ➝ C ➝
R ➝ RS ➝ LS ➝ SW in order.  
If the ENTER button is pressed again
at this time, the test tone will stop.
To end the test tone, 
press TEST TONEbutton again.
Press TEST TONEbutton.
•Test tone will be produced as follows:
When playing a DVD or CD, this will work 
only in Stop mode.
•Use this function to check that each speaker is
correctly connected and that there is no problem.
Alternate method: press the TEST TONEbutton on the remote.
Multi-Channel Pro Logic Mode
Start
Use the Test Tone feature to check the speaker connections.
Setting the Test ToneGB
50 49
12
In Stop or no disc mode,  
press MENUbutton.Press Cursor     button to
move to ‘Audio’ and then
press ENTERbutton.
•When the Cursor      button is pressed, the effect is greater,
and when the Cursor      button is pressed, the effect is
smaller.
34
Press Cursor     button to
move to ‘DRC’ and then
press ENTERbutton.Press Cursor     ,     to
adjust the ‘DRC’.
Press RETURNbutton to return to the previous level.
Press MENUbutton to exit the setup screen.
You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
Setting the DRC (Dynamic Range Compression)
SETUP
 
						

							GB
•The adjustments will appear on the main units display, not on your TV screen.
Adjusting Front/Rear Speaker Balance
•You can select between 00 and –06 and OFF.
•The volume decreases as you move closer to –6.
Adjusting Center/Rear/Subwoofer Speaker Level
•The volume level can be adjusted in steps from +6dB to –6dB.
•The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
Method 2When manually adjusting with the SOUND EDIT button
21
Adjusting Front Speaker BalanceAdjusting Rear Speaker Balance
Press SOUND
EDITbutton and
then press Cursor    
,     .
3
Adjusting Center Speaker Level
45
Adjusting Rear Speaker LevelAdjusting Subwoofer Speaker Level
52
Press SOUND
EDITbutton and
then press Cursor    
,    .Press SOUND
EDITbutton and
then press Cursor   
,    .
Press SOUND
EDITbutton and
then press Cursor   
,    .Press SOUND
EDITbutton and
then press Cursor   
,    .
Note
SETUP
TITLECHAPPRGM RDS RTSTTUNED
kHzMHz
TITLECHAPPRGM RDS RTSTTUNED
kHzMHz
TITLECHAPPRGM RDS RTSTTUNED
kHzMHz
TITLECHAPPRGM RDS RTSTTUNED
kHzMHz
TITLECHAPPRGM RDS RTSTTUNED
kHzMHz
51
Press RETURNbutton to return to the previous level.
Press MENUbutton to exit the setup screen.
21
43
In Stop mode,
press MENU
button.Press Cursor     
button to move to
‘Audio’ and then press
ENTERbutton.
Press Cursor      button
to move to ‘SOUND
EDIT’ and then press
ENTERbutton.
Method 1When adjusting the audio quality using the setup screen
Press Cursor       ,
buttons to select and
adjust the desired item.
Press the      ,      buttons
to adjust the settings.
You can adjust the balance and level for each speaker.
Setting the Audio 
 
						

							GB
54
•DSP appears on the display panel.
•Each time the button is pressed, the selection changes as follows:
POP, JAZZ, ROCK:Depending on the genre of music, you can select POP, JAZZ, and ROCK.
STUDIO: Provides a sense of presence as if in a studio.
CLUB: Simulates the sound of a dance club with a throbbing bass beat.
HALL: Provides a clear vocal as if listening in a concert hall.
MOVIE: Provides the feeling of a movie theater.
CHURCH: Gives the feel of being in a grand church. 
PASS:Select this for normal listening.
Press DSP/EQbutton.
SETUP
•DSP/EQ function is only available in STEREO mode.
Press the       PL II mode button to show STEREO on the display.
•This feature works with CDs, MP3-CDs, 2 channel DVD-Audio,
DivX and Dolby Digital discs.
•When playing a DVD disc encoded with two or more channels, 
multi-channel mode will be selected automatically and DSP/EQ
function does not work.
Note
DSP(Digital Signal Processor) DSP modes have been designed to simulate different acoustic environments. 
EQ: You can select ROCK, POP, or CLASSIC to optimize the sound for the genre of music you are playing
Sound Field (DSP)/EQ Function
Video may look slower than the audio if it is connected to a digital TV. 
If this occurs, adjust the audio delay time to to match the video.
AV SYNC Setup
53
Press RETURNbutton to return to the previous level.
Press MENUbutton to exit the setup screen.
•Audio menu appears.
21
•Setup menu appears.
•AV-SYNC screen appears.
3
Press Cursor     ,     buttons
to move to ‘Audio’ and then 
press ENTERbutton.
Press Cursor     ,      buttons
to move to ‘AV-SYNC’ and
then press ENTERbutton. Press the MENUbutton.
4
•You can set the audio delay time between 0 ms
and 300 ms. Set it to the optimal status.
Press Cursor      ,     buttons
to select the AV-SYNC Delay
Time  and then press the
ENTERbutton.
 
						

							GB
56
SETUP
This function works only in Dolby Pro Logic MUSIC mode.
Dolby Pro Logic II Effect
55
Press       PL II MODEbutton.
PRO LOGIC II
•MUSIC: When listening to music, you can experience sound effects as if you are listening to the actual performance.
•CINEMA: Adds realism to the movie soundtrack.
•PRO LOGIC: You will experience a realistic multi-channel effect, as if using five speakers, while using just the front left
and right speakers.
•MATRIX: You will hear 5.1 channel surround sound.
STEREO: Select this to listen to sound from the front left and right speakers and the subwoofer only.
•Each time the button is pressed, the mode changes as follows.
•When selecting Pro Logic II mode, connect your external device to the
AUDIO INPUT jacks (L and R) on the player. If you connect to only one of
the inputs (L or R), you cannot listen to surround sound.Note
You can select the desired Dolby Pro Logic II audio mode.
Dolby Pro Logic II Mode
12
•You can select between 0 and 7.
•This sets the width of the center image. 
The higher the setting, the less sound comes from
the center speaker. 
•You can select between 0 and 6.
•Incrementally adjusts the sound field (DSP)from
the front or rear.
34
•When playing a DVD disc encoded with two or more channels, multi-channel mode will be
selected automatically and                 (Dolby Pro Logic II) button does not work.
•You can select either 0 or 1.
•This mode extends the front stereo image to
include the surround speakers for an exciting
wraparound effect with side wall imaging.
Press        PL II MODE
button to select ‘MUSIC’
mode.Press       PL II EFFECTbutton
to select Panorama, then press
Cursor     ,      buttons to select
the desired effect setting.
Press       PL II EFFECT button
to select C-Width, then press
Cursor     ,     buttons to select
the desired effect setting.Press       PL II EFFECT button
to select Dimension, then press
the Cursor     ,     buttons to
select the desired setting.
Note
 
						

							GB
58
To tune in to a preset station, press                on the 
remote control to select a channel.
•Refer to Step 2 on page 57 to
automatically or manually tune in
to a station.
21
•Each time the button is pressed,
the band switches between 
FM
➝ AM.
•“PRGM” flashes in the display. 
3
Example: Presetting FM 89.1 in the memory 
Press TUNING/CH
to select 89.10.Press the TUNER
button and select the
FM band.
•Press the TUNER MEMORYbutton before
‘PRGM’ disappears from the display.
•‘PRGM’ disappears from the display and
the station is stored in memory.
54
•You can select between 1 and
15.
Press the TUNER
MEMORY button.
Press the TUNER
MEMORY button
again.
6
To preset another
station, repeat
steps 2 to 5.Press
to select preset
number.
RADIO OPERATION
You can store up to:
15 FM stations
15 AM stations• FMFrequency Modulation
• AMMedium Wave
Presetting Stations
57
21
• The selection toggles back and
forth between FM
➝ AM each
time the FMbutton is pressed.
Tune in to the
desired station.Press TUNER
button.
Automatic Tuning 2
Manual Tuning
21
Select a broadcast
station.
Press the STOP(   )
button to select
PRESET and then press
button to select the preset station.Automatic Tuning 1
Press the Function
button to select the
desired band (FM,
AM).
Press the STOP(   ) button
to select MANUAL and
then press and hold                   button to
automatically search the band.Automatic Tuning 2
Press STOP(   ) to select
MANUAL and then briefly
press to tune in to a lower or
higher frequency.Manual Tuning
•Each time the button is pressed, the sound switches between STEREO and MONO.
•In a poor reception area, select MONO for a clear, interference-free broadcast.
Press MO/STbutton to listen in Mono/Stereo. 
(This applies only when listening to an FM station.)
When                is pressed, a
preset broadcast station is
selected.
Press and hold TUNING/CHto
automatically search for active
broadcasting stations.
Briefly press TUNING/CHto
increase or decrease the
frequency incrementally.Automatic Tuning 1
Remote Control Unit
Main Unit
You can listen to the chosen band (FM, AM broadcast stations) by using either the automatic or
manual tuning operation.
Listening to Radio