Samsung Ht Hd910hd User Manual

English 31
03 Setup
HDMI Format
You can optimize the color setting from the HDMI 
output. Select a connected device Type.
TV : Select if connected to a TV via HDMI. 
Monitor : Select if connected to a Monitor via 
HDMI.
NOTE
A TV or monitor has to be connected to the 
product before you select this option.
Movie Frame (24 Fs)
Setting the Movie Frame (24Fs) feature to On
allows you to adjust the product's HDMI output to
24 frames per second for improved picture quality.
You can enjoy the Movie Frame...

32 English
Setup
Distance
If the speakers cannot be placed at equal 
distances from the listening position, you can 
adjust the delay time of the audio signals from the 
front, center, surround and subwoofer speakers.
You can set the Speaker Distance between 
1ft(0.3m) and 30ft(9.0m).
DisplayAudioSystem
Network
Language
Security
General
Support
Settings DistanceFront L   : ◄ 10ft (3.0m) |Front R  :   10ft (3.0m)
Center : 10ft (3.0m)
Surround L  :  10ft (3.0m)
Surround R  :  10ft (3.0m)
Subwoofer :  10ft...

English 33
03 Setup
Musical Room Calibration 
By setting the Musical Room Calibration (MRC) 
function just once when you relocate or install the 
product, you can have the product automatically 
recognize the distance between speakers, levels 
between channels, and frequency characteristics 
to create a 5.1-channel sound fi eld optimized for 
your environment.
ASC IN
ASC
microphone
Musical Room Calibration
You will hear either the Musical Room Calibration 
mode or the User Speaker Settings.
Off: You will...

34 English
Setup
Digital Output
Set Digital output depending on the connected 
receiver. (For more details, please refer to the 
digital output selection.) 
PCM
Bistream(Re-encode)
Bistream(Audiophile)
Blu-ray Discs may include three audio streams.
-  Primary Audio : The audio soundtrack of the 
main feature.
- 
  Secondary Audio : Additional soundtrack 
such as director or actor's commentary.
-  Interactive Audio : Interactive sounds will be 
heard when selected. Interactive Audio is 
different on...

English 35
03 Setup
Dynamic Range Control
You can listen at low volumes but still hear dialog 
clearly. This is only active when a Dolby Digital 
signal is detected. 
Off : You can enjoy the movie with the 
standard Dynamic Range. 
On : When Movie soundtracks are played at 
low volume or from smaller speakers, the 
system can apply appropriate compression to 
make low-level content more intelligible and 
prevent dramatic passages from getting too 
loud.
AV Sync
Video may look slower than the audio when...

36 English
Setup
Description of Device(Storage) Information on 
the Product
Total Size : Total size of the Device (Storage).
Available Size : Available size of the Device (Storage).
NOTE
In the external memory mode, disc playback 
will be stopped if you disconnect the USB 
device in the middle of the playback.
Only those USB devices formatted in FAT fi le 
system (DOS 8.3 volume label) are supported, 
and it is recommended to use USB devices 
that support USB 2.0 protocol, 4 MB/sec or 
faster read/write...

English 37
03 Setup
Network Setup
To begin setting up the network connection for 
your product, follow these steps:
In the Home menu, press the ◄► buttons to 
select the Settings, and then press the 
ENTER button.
Press the ▲▼ buttons to select Network, 
and then press the ENTER button.
Press the ▲▼ buttons to select Network 
Settings, and then press the ENTER button.
Press the ▲▼ buttons to select Network 
Type, and then press the ENTER button.
Press the ▲▼ buttons to select Wired or 
Wireless, and then...

38 English
Setup
Display
Audio
System
NetworkLanguage
Security
General
Support
Settings 
On-Screen Menu  :Disc Menu  :
Audio :
Subtitle :
Select to confi gure your network type and IP address, or to perform a Network Test.
Network SettingsInternet Protocol Setup  : Manual 
IP Address  : 0 0
 0
 0
 
Subnet Mask  : 255
 255
 255
 0
 
Gateway : 0
 0
 0
 0
 
DNS   : Manual
DNS Server  : 0
 0
 0
 0
 
 > Move " Select ' Return
Use the number buttons on your remote to 
enter numbers.
When done with each...

English 39
03 Setup
Display
Audio
System
NetworkLanguage
Security
General
Support
Settings 
Network SettingsNetwork Selection
Connecting to network.
Network Name(SSID) : shj
  
" Select ' ReturnStop
In the list of networks, press the ▲▼ 
buttons to select a network, and then press 
the ENTER button.
If the PIN/Security pop-up appears, go to 
Step 7. If the Network Connecting Screen 
appears, go to Step 11.
Press the ▲▼ buttons to select PIN or 
Security.
For most home networks, you would select...

40 English
Setup
When done with each fi eld, use the ► 
button to move successively to the next 
fi eld.
You can also use the other arrow buttons to 
move up, down, and back.
Enter the IP Address, Subnet Mask, and 
Gateway values.
Press the ▼ to go to DNS.
Press the ▼ button to go to the fi rst DNS 
entry fi eld. Enter the numbers as above.
When done, press the ▲ button to return to 
Access Point Selection. Select the network, 
and then press the ENTER button.
Go to Step 6 in the Automatic Wireless...