Samsung Ht Ds1000 Instruction Manual

20
CONNECTIONS
• If you connect the HDMI and Component outputs (PR, PB, Y) at the same time, the Component output
resolution changes automatically to the designated HDMI resolution.
Example: If the TV connected to HDMI can only support up to 480p, the HDMI and Component outputs are
all converted to 480p, even if you select the resolution switch to 1080i.
• Since this product has an embedded Video Upscaler function with Faroudja DCDi technology, it can
enhance a 480i DVD resolution output to...

Connecting the Video Out to TV
21
You can adjust the resolution switch to set the HDMI and component (PR, PB, Y) output resolution  to
480p/720p/1080i.
Example: If the TV supports resolution up to 480p 
Press and hold DCDibutton on the remote
control for over 3 seconds.
•Each time the button is pressed, the selection alternates between
DCDi ONand DCDi OFF.
•If you connect the HDMI and Component outputs (PR, PB, Y) at the same
time, Component output resolution changes automatically to the
designated HDMI...

22
CONNECTIONS
Connect the Anynet input terminal on the back of this unit to your Samsung TVs Anynet
output terminal.1
Connect the Anynet Out Terminal on the back of this unit to the Anynet input of Samsung
external AV devices.2
VIDEO INOther AV devices
Samsung DVD player
Samsung VCR
Samsung Set-Top Box
VIDEO OUT ANYNET
TERMINAL
Use this to connect Anynet-enabled 
AV devices when necessary.
How to Connect to Anynet
Using the Anynet function, the DVD Home Theater System can be conveniently controlled...

Connecting External Components
23
Example: Digital signal components such as a Settop Box or CD Recorder.
Connecting an External Digital Component
Optical Cable
(not included)
Press AUXon the remote control to select ‘D.IN 1 or D.IN 2’.
•Each time the button is pressed, the selection changes as follows: D.IN 1➝D.IN 2➝AUX.
•You can also use the FUNCTIONbutton on the main unit.
The mode switches as follows: DVD/CD➝ D.IN 1➝D.IN 2➝ AUX➝ FM.
Connect the Digital In 1 or 2 (OPTICAL) on the main unit to the...

•To listen TV sound in 5.1 channel sound through the main unit, connect the Audio In on the
main unit to the Audio Output on the TV.
•You can connect Video Output jack on the VCR to the TV, and connect Audio Output jack on
the VCR to the HT-DS1000.
LR
24
Example: Analog signal components such as a VCR or TV.
Connecting an External Analog Component
Audio Cable
If the external analog
component has only one
Audio Out, connect either left
or right.
CONNECTIONS
Note
Press AUXon the remote control to select...

25
Connecting the FM Antenna
FM antenna connection
1. Connect the FM antenna supplied to the FM 75ΩCOAXIAL terminal as a temporary
measure.
2. Slowly move the antenna wire around until you find a location where reception is
good, then fasten it to a wall or other rigid surface.
 1p~44p(DS1000)-sea  9/15/04 2:43 PM  Page 28
 

26
•Each time the button is pressed, the TV indicator (red) and the DVD Receiver indicator (green) will flash alternately.
•You can operate the TV while the TV indicator is flashing and the DVD player while the DVD indicator is flashing.
•Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VIDEO, and Numeric (0-9) buttons.
•By default, the remote control is set to work with Samsung TVs. See page 65 for more information on the operation of the remote control.
Press MODEbutton.
To Operate the TV...

27
Disc Playback
2
1
Press OPEN/CLOSEbutton to open the
disc tray.
3
Press OPEN/CLOSEbutton to close the disc
window.
•The disc plays automatically when the disc window is closed.
•The disc menu may appear differently depending on the disc.
DVDCD
•Playback starts automatically.
Insert the disc so that the printed side
faces up.
•To resume playback, press PLAY/PAUSE(          )
button again.
To temporarily pause playback, 
press PLAY/PAUSEduring playback.
•If pressed once, “PRESS PLAY” is displayed and...

28
CONNECTIONS
•In this manual, the instructions marked with DVD (               ) are applicable to
DVD-VIDEO, DVD-AUDIO, and DVD-R/RW discs.
Where a particular DVD type is mentioned, it is indicated separately.
•Depending on the content of the disc, the initial screen may appear different.
DVDNote
Groups and tracks (DVD-AUDIO)
•DVD-audio is divided into several large sections called groups and smaller
sections called tracks. Numbers are allotted to these sections. 
These numbers are called group...

29
•Depending on the recording mode, some MP3-CDs may not play.
•Table of contents of a MP3-CD varies depending on the MP3 track format
recorded on the disc.Note
MP3-CD Playback
Data CDs (CD-R, CD-RW) encoded in MP3 format can be played.
2
In Stop mode, use    
to select
the album, and
then press the
ENTERbutton.
•The MP3 menu screen will appear
and playback will start.
•Depending on the MP3 disc, the
appearance of the menu may be
different.
1
Press the
OPEN/CLOSEbutton
to open the disc
windows, and...