Samsung Ht Db750m Instruction Manual
Have a look at the manual Samsung Ht Db750m Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
50 To listen in the auto sound calibration mode, briefly press ASC button. (If you set the auto sound calibration in the order from 1 to 4 above for the first time) •The selection alternates between ASC ONand ASC OFFin the display. •If you select ASC ON, you can listen in the auto sound calibration mode. If you select ASC OFF, you can listen in the mode set in the audio setting of the setup screen. 1 Plug the auto sound calibration microphone into the auto sound calibration input jack. 2 Place the auto sound calibration microphone at the listeners position. 4 5 Press ASC button. When the message REMOVE MIC appears in the display, unplug the auto sound calibration microphone. A bell will sound and the setup finishes. •The tone will be output twice, in the given order (L ➝ C ➝ R ➝ RS ➝ LS ➝ SW), and 5.1-channel sound field is optimized automatically. •The auto sound calibration setup takes about 2 minutes to complete. 3 Adjust the volume control on the main unit as follows: •If the distance between the listener and the speaker is over 5 m: Set the main units volume to over 25. •If the distance between the listener and the speaker is 3 to 5 m: Set the main units volume to 25. •If the distance between the listener and the speaker is below 3 m: Set the main units volume to 15. To cancel the auto sound calibration setup, press ASC button. •The tone output stops, CANCEL ASC appears in the display followed by REMOVE MIC, and the setup will be cancelled. A tone is output.A result for each speaker is displayed. SETUP 31P~68P(DB750)-GB 2004.9.16 8:44 AM Page 55
51 DSPCMXLINEAR PCM MPEG-2 AACMPEGLCRSWLSRSTITLEPBC CHAP PRGM RDS RT TATUNEDkHzMHzST DSPCMXLINEAR PCM MPEG-2 AACMPEGLCRSWLSRSRTTA TUNEDkHzMHzST DSPCMXLINEAR PCM MPEG-2 AACMPEGLCRSWLSRSTITLE PBCCHAPPRGM RDS RTTA TUNEDkHzMHzST DSPCMXLINEAR PCM MPEG-2 AACMPEGLCRSWLSRSTITLE PBCCHAPPRGM RDS RTTA TUNEDkHzMHzST DSPCMXLINEAR PCM MPEG-2 AACMPEGLCRSWLSRSTITLE PBCCHAPPRGM RDS RTTA TUNEDkHzMHzST DSPCMXLINEAR PCM MPEG-2 AACMPEGLCRSWLSRSTITLE PBCCHAPPRGM RDS RTTA TUNEDkHzMHzST DSPCMXLINEAR PCM MPEG-2 AACMPEGLCRSWLSRSTITLE PBCCHAPPRGM RDS RTTA TUNEDkHzMHzST DSPCMXLINEAR PCM MPEG-2 AACMPEGLCRSWLSRSTITLEPBC CHAP PRGM TATUNEDkHzMHzST DSPCMXLINEAR PCM MPEG-2 AACMPEGLCRSWLSRSTITLEPBC CHAP PRGM RDS RT TATUNEDkHzMHzST DSPCMXLINEAR PCM MPEG-2 AACMPEGLCRSWLSRSTITLEPBC CHAP PRGM RDS RT TATUNEDkHzMHzST CMXLINEAR PCM MPEG-2 AACMPEGLCRSWLSRSTITLE PBCCHAPPRGM RDS RTTA TUNEDkHzMHzST Live Surround Mode You can reproduce a 2-channel sound source, such as VCD, CD, and radio broadcast, in 5.1-channel surround sound. Super 5.1 Function •Each time the button is pressed, the selection alternates between SUPER 5.1 and SUPER OFF. •Select SUPER 5.1 to play 2-channel sound in 5.1 channel. Press SUPER5.1 button. DSPCMXLINEAR PCM MPEG-2 AACMPEGLCRSWLSRSTITLEPBC CHAP PRGM RDS RT TATUNEDkHzMHzST DSPCMXLINEAR PCM MPEG-2 AACMPEGLCRSWLSRSTITLE PBCCHAPPRGM RDS RTTA TUNEDkHzMHzST If you select Music Sound Field when listening to a 2-channel sound source, it will be reproduced in 5.1-channel surround sound so that you can enjoy a dynamic sound with a sense of presence. Live Surround Mode Function •Each time the button is pressed, the selection changes as follows: Press MUSICbutton. You select from 3 different modes of sound field for movies. Movie Sound Field Function •Each time the button is pressed, the selection changes as follows: When watching an action movie When watching a drama When watching a musical Press MOVIE button. •When you insert a DVD recorded in 2-channel or multi-channel format and press the SUPER 5.1 button, the message THIS FUNCTION APPLIES ONLY 2CH SOURCE appears in the display and it will not work.Note 31P~68P(DB750)-GB 2004.9.16 8:44 AM Page 56
52 Virtual Headphone Function Use headphones (not supplied) for private listening pleasure. You can enjoy a dynamic sound effects similar to that of 5.1 channel surround sound using a conventional stereo headphone. ASC LSM V-H/P •To purchase headphones, please contact the nearest Samsung Electronics Customer Center. 12 •Each time the button is pressed, the selection alternates between VIRTUAL ONand VIRTUAL OFF. Plug the headphones into the headphone jack.Press V-H/P button. •VIRTUAL ON:Select to enjoy a 5.1-channel surround sound that gives the feeling of being in a baseball park or concert hall. •VIRTUAL OFF:Select to listen to a standard 2-channel stereo sound. SETUP •Do not listen at extremely high volume levels when using headphones. Extended, high-volume listening can lead to permanent hearing loss.Note 31P~68P(DB750)-GB 2004.9.16 8:44 AM Page 57
53 Dolby Pro Logic II Mode You can select the desired Dolby Pro Logic II audio mode. Press PL II MODEbutton. DSPCMXLINEAR PCM MPEG-2 AACMPEGLCRSWLSRS TITLE PBCCHAPPRGM RDS RTTA TUNEDkHzMHzST DSPCMXLINEAR PCM MPEG-2 AACMPEGLCRSWLSRS TITLE PBCCHAPPRGM RDS RTTA TUNEDkHzMHzST DSPCMXLINEAR PCM MPEG-2 AACMPEGLCRSWLSRS TITLE PBCCHAPPRGM RDS RTTA TUNEDkHzMHzST DSPCMXLINEAR PCM MPEG-2 AACMPEGLCRSWLSRS TITLE PBCCHAPPRGM RDS RTTA TUNEDkHzMHzST DSPCMXLINEAR PCM MPEG-2 AACMPEGLCRSWLSRS TITLE PBCCHAPPRGM RDS RTTA TUNEDkHzMHzST DSPCMXLINEAR PCM MPEG-2 AACMPEGLCRSWLSRS TITLE PBCCHAPPRGM RDS RTTA TUNEDkHzMHzST S PRO LOGIC II •MUSIC: When listening to music, you can experience sound effects as if you are listening to the actual performance. •CINEMA: Adds realism to the movie soundtrack. •PRO LOGIC: You will experience a realistic multi-channel effect, as if using five speakers, while using just the front left and right speakers. •MATRIX: You will hear 5.1 channel surround sound. STEREO: Select this to listen to sounds from the front left and right speakers and the subwoofer only. •Each time the button is pressed, the mode changes as follows. •When selecting Pro Logic II mode, connect your external device to the AUDIO INPUT jacks (L and R) on the player. If you connect to only one of the inputs (L or R), you cannot listen to 5.1 channel surround sound.Note 31P~68P(DB750)-GB 2004.9.16 8:44 AM Page 58
54 Dolby Pro Logic II Effect This function works only in Dolby Pro Logic MUSIC mode. 12 •You can select between 0 and 7.•You can select between 0 and 6. 34 •PANORAMA: This mode extends the front stereo image to include the surround speakers for an exciting wraparound effect with side wall imaging. •CENTER WIDTH: Sound is output to the center speaker only. The front left and right speakers produce phantom sound. •DIMENSION: Incrementally adjusts the sound field (DSP) from the front or rear. •When playing a DVD disc encoded with two or more channels, multi-channel mode will be selected automatically and (Dolby Pro Logic II) button does not work. •You can select either 0 or 1. Press PL II MODE button to select ‘MUSIC’ mode.Press PL II EFFECT button and then press Cursor , buttons to select the mode. DSP CMX LINEAR PCM MPEG-2 AACMPEGLCRSWLSRS TITLE PBCCHAPPRGM RDS RTTA TUNED kHzMHz STDSP CMX LINEAR PCM MPEG-2 AACMPEGLCRSWLSRS TITLE PBCCHAPPRGM RDS RTTA TUNED kHzMHz ST DSP CMX LINEAR PCM MPEG-2 AACMPEGLCRSWLSRS TITLE PBCCHAPPRGM RDS RTTA TUNED kHz MHz STDSP CMX LINEAR PCM MPEG-2 AACMPEGLCRSWLSRS TITLE PBCCHAPPRGM RDS RTTA TUNED kHz MHz ST Press PL II EFFECT button and then press Cursor , buttons to select the mode. Press PL II EFFECT button and then press Cursor , buttons to select the mode. Note SETUP 31P~68P(DB750)-GB 2004.9.16 8:44 AM Page 59
55 Listening to Radio You can listen to the chosen band (FM, MW, LW broadcast stations) by using either the automatic or manual tuning operation. 21 • The selection toggles back and forth between FM ➝ MW ➝ LW each time the TUNER(BAND)button is pressed. Tune in to the desired station.Press TUNER/ BANDbutton. Automatic Tuning 2 Manual Tuning 21 Select a broadcast station. Press the STOP( ) button to select PRESET and then press button to select the preset station.Automatic Tuning 1 Press the Function button to select the desired band (FM, MW, LW). Press the STOP( ) button to select MANUAL and then press and hold button to automatically search the band.Automatic Tuning 2 Press STOP( ) to select MANUAL and then briefly press to tune in to a lower or higher frequency.Manual Tuning •Each time the button is pressed, the sound switches between STEREO and MONO. •In a poor reception area, select MONO for a clear, interference-free broadcast. Press MO/STbutton to listen in Mono/Stereo. (This applies only when listening to an FM station.) When is pressed, a preset broadcast station is selected. Press and hold to automatically search for active broadcasting stations. Briefly press to increase or decrease the frequency incrementally.Automatic Tuning 1 Remote Control Unit Main Unit 31P~68P(DB750)-GB 2004.9.16 8:44 AM Page 60
56 Presetting Stations To tune in to a preset station, press on the remote control to select a channel. •Refer to Step 2 on page 55 to automatically or manually tune in to a station. 21 •Each time the button is pressed, the band switches between FM ➝ MW ➝ LW. TITLECHAPPRGM RDS RTSTTUNED kHzMHz TITLECHAPPRGM RDS RTSTTUNED kHzMHz TITLERDS RTSTTUNED kHzMHz •“PRGM” flashes in the display. 3 Example: Presetting FM 89.1 in the memory Press to select 89.10. Press the TUNER(BAND) button and select the FM band. •Press the TUNER MEMORYbutton before ‘PRGM’ disappears from the display. •‘PRGM’ disappears from the display and the station is stored in memory. 54 •You can select between 1 and 15. TITLERDS RTSTTUNED kHzMHz TITLECHAPRDS RTSTTUNED kHzMHz Press the TUNER MEMORY button. Press the TUNER MEMORY button. 6 To preset another station, repeat steps 2 to 5. Press to select preset number. RADIO OPERATION You can store up to: 15 FM stations 8 MW stations 7 LW stations• FMFrequency Modulation • AM(MW)Medium Wave • LWLong Wave 31P~68P(DB750)-GB 2004.9.16 8:44 AM Page 61
About RDS broadcasting • RDS is not available for MW/LW broadcasts. • RDS may not operate correctly if the station tuned is not transmitting RDS signal properly or if the signal strength is weak. • If searching finishes at once,“PS”,and “RT” will not appear on the display. Using the RDS (Radio Data System) to receive FM stations What information can RDS signals provide? RDS allows FM stations to send an additional signal along with their regular program signals. For example,the stations send their station names,as well as information about what type of program they broadcast, such as sports or music,etc. When tuned to an FM station which provides the RDS service,the RDS indicator lights up on the display. • Description on RDS function 1. PTY (Program Type) : Displays the type of programme currently being broadcast 2. PS NAME (Program Service Name) : Indicates the name of broadcasting station and is composed of 8 characters. 3. RT (Radio Text) :Decodes the text broadcast by a station (if any) and is composed of maximum 64 characters. 4. CT (Clock Time) :Decodes the real time clock from the FM frequency.• Some stations may not transmit PTY, RT or CT information therefore this may not be displayed in all cases. 5. TA (Traffic Announcement) : When this symbol flashes it shows that the traffic announcement is in progress. Note Note You can see the RDS signals the station sends on the display. TO show the RDS signals Press RDS DISPLAY while listening to an FM station. Each time you press the button, the display change to show you the following information: PS (Program Service) :While searching,PSappears and then the station names will be displayed.NO PS appears if no signal is sent. RT(RadioText) : while searching,RTappears and then text messages the station sends will be displayed. NO RTappears if no signal is sent. Frequency : station frequency (non-RDS service) About characters shown in the display When the display shows PS,or RT signals,the following characters are used. • The display window cannot differentiate upper case and lower case letters and always uses upper case letters. • The display window cannot show accented letters, “A,” for instance, may stans for accented “A’s” like “À, Â, Ä, Á, Åand Ã.” 57 31P~68P(DB750)-GB 2004.9.16 8:44 AM Page 62
PTY (Program Type) indication and PTY-SEARCH function 58 To search for a program using the PTY codes Before you start, remember... • The PTY Search is only applicable to preset stations. • To stop searching any time during the process, press PTY SEARCH while searching. • There is a time limit in doing the following steps. If the setting is cancelled before you finish, start from step 1 again. • When pressing the buttons on the primary remote control, make sure that you have selected the FM station using the primary remote control. One of the advantages of the RDS service is that you can locate a particular kind of program from the preset channels by specifying the PTY codes. Press PTY SEARCH while listenning to an FM station. 1 Press the PTY-or PTY+until the PTY code you want appears on the display. • The display gives you the PTY codes described to the right. 2 Press PTY SEARCH again, while the PTY code selected in the previous step is still on the display. • The center unit searches 15 preset FM stations,stops when it finds the one you have selected, and tunes in that station. 3 Display NEWS AFFAIRS INFO SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED POP M ROCK M M.O.R.M LIGHT M CLASSIC OTHER M WEATHER FINANCE CHILDREN SOCIAL A RELIGION PHONE IN TRAVEL LEISURE JAZZ COUNTRY NATION M OLDIES FOLK M DOCUMENTProgram Type • News including an announced opinion and report • Several matters including a current incident, documentary, discussion and analysis. • Information including weights and measures, returns and forecast, matters interesting the customer, medical information, etc. • Sports • Education • Drama-Radio serial, etc. • Culture-National or local culture including the religious problem, social science, language, theater,etc. • Natural science and technology • Others-Speech, amusing program (quiz, game), interview, comedy and satirical play, etc. • Pop music • Rock music • Current contemporary music considered to be “easy listening.” • Light classical music- Classical music and instrumental and chorus music • Heavy classical music-Orchestra music, symphony, chamber music and opera • Other music - Jazz, R&B country music • Weather • Finance • Children’s programmes • Social affairs • Religion • Phone in • Travel • Leisure • Jazz Music • Country Music • National Music • Oldies Music • Folk Music • Documentary RADIO OPERATION 31P~68P(DB750)-GB 2004.9.16 8:44 AM Page 63
59 Convenient Functions •The remaining time before the DVD player will shut itself off is displayed. •Pressing the button again changes the sleep time from what you have set earlier. To confirm the sleep timer setting, press SLEEPbutton. • SLEEP will be displayed. Each time the button is pressed the preset time changes as follows: 10 ➝ 20 ➝ 30 ➝ 60 ➝ 90 ➝ 120 ➝ 150 ➝ OFF. TITLECHAPPRGM RDS RTSTTUNED kHzMHz Press SLEEPbutton. Sleep Timer Function You can set the time that the DVD player will shut itself off. To cancel the sleep timer, press SLEEPbutton until OFF appears on the display. 31P~68P(DB750)-GB 2004.9.16 8:44 AM Page 64