Samsung Ht Db1850 Instruction Manual
Have a look at the manual Samsung Ht Db1850 Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
40 435 8 Press RETURNbutton to return to the previous level. Press MENUbutton to exit the setup screen. Press MENUbutton. Press Cursor button to move to ‘Setup’ and then press ENTERbutton.Press Cursor button to move to ‘LOGO’ and then press ENTERbutton. Press OPEN/CLOSE button to open and then close the disc tray. DVDVCDJPEGTo Change the Wallpaper 1During playback, press PLAY/PAUSEbutton when you see an image you like.Press LOGObutton. •LOGO COPYING will be displayed on the TV screen followed by LOGO COPIED. 23Press OPEN/CLOSE button to open and then close the disc tray. •The wallpaper is changed. SETUP PAUSELOGO COPYINGPAUSE 31P~68P(DB750)-GB 2004.9.16 8:44 AM Page 45
21 43 Setting the Speaker Mode Press MENUbutton. Press Cursor button to move to ‘Audio’ and then press ENTERbutton. In the Speaker Setup, press the ENTERbutton again.Press Cursor , , , buttons to move to the desired speaker and then press ENTERbutton. •For C, LS, and RS, each time the button is pressed, the mode switches alternately as follows: SMALL ➝ NONE. •For L and R, the mode is set to SMALL. •With (Dolby Pro Logic II), the delay time may be different for each mode. •With AC-3 and DTS, the delay time is set between 00 and 15mSEC. •Depending on PRO LOGIC and STEREO, the speaker mode may vary. 41 Note SMALL: Select this when using the speakers. NONE: Select this when no speakers are installed. 31P~68P(DB750)-GB 2004.9.16 8:44 AM Page 46
Setting the Test Tone L: Front Speaker (L) C: Center Speaker SW: Subwoofer R: Front Speaker (R) LS: Rear Speaker (L) RS: Rear Speaker (R) Press RETURNbutton to return to the previous level. Press MENUbutton to exit the setup screen. 42 SETUP 21Press MENUbutton. Press Cursor button to move to ‘Audio’ and then press ENTERbutton. 3 Press Cursor button to move to ‘TEST TONE’ and then press ENTERbutton. •The test tone will be sent to L ➝ C ➝ R ➝ RS ➝ LS ➝ SW in that order. If the button is pressed again at this time, the test tone will stop. To end the test tone, press TEST TONEbutton. Press TEST TONEbutton. •Test tone will be produced as follows: When playing a DVD or CD, this will work only in Stop mode. •Use this function to check that each speaker is correctly connected and that there is no problem. When manually testing using the TEST TONEbutton Multi-Channel Pro Logic Mode Start 31P~68P(DB750)-GB 2004.9.16 8:44 AM Page 47
Setting the Delay Time 43 Setting up the Speaker Delay Time When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same. Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the sound of the Center Speaker and Surround Speakers. 21Press MENUbutton. Press Cursor button to move to ‘Audio’ and then press ENTER button. 31P~68P(DB750)-GB 2004.9.16 8:44 AM Page 48
44 5.3 ms 10.6 ms 15.9 ms • Setting REAR (SURROUND) SPEAKERS If the distance of Df is equal to the distance of Ds in the figure, set the mode as 0ms. Otherwise, change the setting according to the table. • Setting CENTER SPEAKER If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms. Otherwise, change the setting according to the table. Distance between Df and Dc Delay Time Delay Time 1.3 ms 2.6 ms 3.9 ms 5.3 ms Distance between Ds and Dc 50 100 150 200 200 400 600 Df: The distance from FRONT SPEAKER Dc: The distance from CENTER SPEAKER Ds: The distance from SURROUND SPEAKER Ideal CENTER SPEAKER placement It is desirable to place all speakers within this circle.Ideal SURROUND SPEAKER placement SETUP •You can set the delay time for C between 00 and 05mSEC and for LS and RS between 00 and 15mSEC. 435 Press Cursor button to move to ‘DELAY TIME’ and then press ENTERbutton.Press Cursor , , , buttons to move to the desired speaker and then press ENTERbutton. Press Cursor , to set the Delay time. Press RETURNbutton to return to the previous level. Press MENUbutton to exit the setup screen. 31P~68P(DB750)-GB 2004.9.16 8:44 AM Page 49
45 Setting the Audio Quality You can adjust the balance and level for each speaker. 21 43 Press MENUbutton. Press Cursor button to move to ‘Audio’ and then press ENTERbutton. Press Cursor button to move to ‘SOUND EDIT’ and then press ENTERbutton.Press Cursor , , , buttons to select the desired item and then press ENTERbutton. Method 1When adjusting the audio quality using the setup screen Press RETURNbutton to return to the previous level. Press MENUbutton to exit the setup screen. 31P~68P(DB750)-GB 2004.9.16 8:44 AM Page 50
Adjusting Front/Rear Speaker Balance •You can select between 00 and –06 and OFF. •The volume decreases as you move closer to –6. Adjusting Center/Rear/Subwoofer Speaker Level •The volume level can be adjusted in steps from +6dB to –6dB. •The sound gets louder as you move closer to +6dB and smaller as you get closer to -6dB. Method 2When manually adjusting with the SOUND EDIT button 21 Adjusting Front Speaker BalanceAdjusting Rear Speaker Balance Press SOUND EDITbutton and then press Cursor , . 3 Adjusting Center Speaker Level 45 Adjusting Rear Speaker LevelAdjusting Subwoofer Speaker Level 46 Press SOUND EDITbutton and then press Cursor , .Press SOUND EDITbutton and then press Cursor , . Press SOUND EDITbutton and then press Cursor , .Press SOUND EDITbutton and then press Cursor , . Note SETUP TITLECHAPPRGM RDS RTSTTUNED kHzMHz TITLECHAPPRGM RDS RTSTTUNED kHzMHz TITLECHAPPRGM RDS RTSTTUNED kHzMHz TITLECHAPPRGM RDS RTSTTUNED kHzMHz TITLECHAPPRGM RDS RTSTTUNED kHzMHz 31P~68P(DB750)-GB 2004.9.16 8:44 AM Page 51
47 Setting the DRC (Dynamic Range Compression) You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night. 12Press MENU button. Press Cursor button to move to ‘Audio’ and then press ENTER button. 31P~68P(DB750)-GB 2004.9.16 8:44 AM Page 52
48 •The longer the Cursor button is held down, the greater the effect, and the longer Cursor button is held down, the smaller the effect. •Once the setup is complete, you will be taken to the previous screen. 34 Press Cursor button to move to ‘DRC’ and then press ENTER button.Press Cursor , to adjust the ‘DRC’. Press RETURNbutton to return to the previous level. Press MENUbutton to exit the setup screen. SETUP 31P~68P(DB750)-GB 2004.9.16 8:44 AM Page 53
49 Auto Sound Calibration Setup Auto Sound Calibration By setting the auto sound calibration function just once when you relocate or install the unit, you can have the unit automatically recognize the distance between speakers, levels between channels, and frequency characteristics to create 5.1-channel sound field optimized for the listeners environment. L: Front Speaker (L) R: Front Speaker (R) C: Center Speaker SW: Subwoofer LS: Rear Speaker (L) RS: Rear Speaker (R) •S.LOGO ON or S.LOGO OFF appears in the display. •Each time the button is pressed, the selection alternates between S.LOGO ONand S.LOGO OFF. •If you select S.LOGO ON, a sound logo will be output when the disc reading is finished after power-on. If you select S.LOGO OFF, no sound logo will be output. To Turn On or Off Sound Logo Press and holdASCbutton. Briefly pressASCbutton.1 2•ASC CHECK appears in the display. •Distance and level values specified for each channel will appear in the display. Press and hold ASCbutton twice. Briefly press ASCbutton.1 2 When you turn on the power, the unit produces a sound logo after the disc reading to notify that the unit is optimized for playback. To Verify the Auto Sound Calibration * This function is available only for DVD/CD playback. *The following images are for illustrative purposes only and may differ from the actual product. •If you purchased the unit for the first time or initialized it, pressing the Auto Sound Calibration button without connecting the auto sound calibration microphone will display the message PLEASE SET ASC FUNCTION FIRST in the display. •Because the volume level of the tone is fixed during the auto sound calibration setup, you cannot adjust the volume using the volume control buttons. •If the auto sound microphone is disconnected during the auto sound calibration setup, the setup will be cancelled. Note Auto Sound Calibration Microphone 31P~68P(DB750)-GB 2004.9.16 8:44 AM Page 54