Samsung Ht D7500w User Manual

0 English
English 1

02
Connections

Connecting the Subwoofer
To activate the product, you must connect the subwoofer to the product using the system cable. 
Most of external connections including power supply, speakers and TV are made through the 
subwoofer.
CAUTION
Do not plug or unplug the system cable during the power cord is plugged. Otherwise, it can cause damage to the product.
Attaching the Toroidal Ferrite Core to the Power Cord of the Subwoofer
If you attach a Toroidal ferrite core...

 English

Connections

English 

Connecting The Speakers
Press down the terminal tab on the back of the speaker. 
Insert the black wire into the black terminal (–) and the red wire into the red (+) terminal, and then release the tab.
Connect the speaker wire plugs to the back of the product by matching the colors of the speaker plugs to the speaker jacks.
With the product turned off, insert the TX card into the TX Card Connection (WIRELESS) on the back of the product.Hold the TX card...

 English
English 

02
Connections

CAUTION
Do not let children play with or near the speakers. They could get hurt if a speaker falls.
When connecting the speaker wires to the speakers, make sure that the polarity (+/ –) is correct.
  Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands or alien substances into the duct (hole) of the subwoofer speaker.
  Do not hang the subwoofer on the wall through the duct (hole).
Do not insert any...

 English

Connections

English 

Connecting external Devices/your tv via HDmI
HDMI is the standard digital interface for connecting to devices such as a TV, projector, DVD player, Blu-ray 
player, set top box, and more.
Because HDMI is all digital, you'll enjoy digital quality video and sound as it was originally created, without 
the distortions that can be caused when digital content is converted to analogue.
HDMI OUT : Connecting to a TV with an HDMI Cable (BEST QUALITY)...

 English
English 

02
Connections

HDMI Auto Detection Function
If you have connected your home cinema by HDMI cable, the home cinema's video output 
automatically switches to the HDMI mode when you turn it on. For available HDMI video resolutions, 
see page 32.
This function is not available if the HDMI cable does not support CEC.
HDMI connection description
- HDMI outputs only a pure digital signal to the TV.
-  If your TV does not support HDCP, random noise appears on the...

 English

Connections

English 

Connecting audio from external Components
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
Connect the Digital Input (OPTICAL) on the product to the Digital Output of the external digital 
component.
 Press the FUNCTION button to select D. IN input.
The mode switches as follows : BD/DVD ; D. IN ; AUX ; R. iPod ; W. iPod ; HDMI1 ; HDMI2 ; TUNER
NOTE
To see video from your...

 English
English 

02
Connections

Connecting to a network
You can connect this product to a network and use network based services such Smart Hub and BD-
LIVE (See pages 62~71), as well as receive software upgrades through the network connection. We 
recommend using a wireless router or IP router for the connection.
For more information on router connection, refer to the user manual of the router or contact the router
manufacturer for technical assistance.
Cable Network
Using the...

 English

Connections
English 
Wireless Network
You can connect the home cinema to your network through a wireless IP sharer (router).
To set the network confi guration options. see page 39.
NOTE
To use a wireless network, your product must be connected to a wireless IP sharer (router). If the wireless IP sharer supports DHCP, your product can use a DHCP (dynamic) or static IP address to connect to the wireless network.
This product supports IEEE 802.11b,g and n. We recommend using...

 English
English 

03
Setup
Initial Settings
Turn on your TV after connecting the product.When you connect and turn on the product to a TV for the fi rst time, the Initial Settings screen appears.
Initial Settings | On-Screen Language
m Move    " Enter    
Select a language for the on-screen displays.  Български  Hrvatski  Čeština  Dansk  Nederlands English  Eesti  Suomi  Français  Deutsch  Ελληνικά  Magyar  Indonesia  Italiano à´	¯
Press the ▲▼◄► buttons to select the desired...

0 English

Setup

English 1

accessing the Settings menu
FUNCTIONTV SOURCEPOWER
BD RECEIVER/TVSLEEP
DISC MENUMENUTITLE MENU
MUTE
SFE MODE
DSP
VOLTUNING/CH
TOOLS
RETURNEXIT
INFO
ABCD
TUNER MEMORY
INIERNET 
MO/ST
REPEATFULL SCREEN
123
456
78
0
9
POPUP
@
DISC MENUTITLE MENU
TOOLSINFO
TUNER 
POPUP1
24
3
1MENU Button : Press to move to the Home menu.
2RETURN Button : Return to the previous menu.
3
ENTER / DIRECTION Button :Move the cursor or select an item.Activate the currently selected item.Confi...